HL-1GE / HL-1GE2 HGU Configuration [ZYXEL]

Service scenario

HL-1GE / HL-1GE2 can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
SFU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In example, if ONT has to be working as HGU, we need to set only VEIP. If as SFU, we need to set bridge port(s) and VEIP(only if we want to use ip-host).
SFU mode allows to prepare more complex configuration – such as QinQ tunnel or VLAN translation on the ONT. In this tutorial we will focus on HGU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

Document Date and version	Tested with ONT HALNy HL-1GE
Tested on ZYXEL OLT1404A	Version: V4.02(ABJB.3)C0_200904
Tested with ONT HALNy HL-1GE / HL-1GE2	Supported on Version: V2.0.13 or above
Revision	1

Let us know how to improve below document on: support@halny.com

Supported service scenarios

1. ONT Configuration (Access mode, only INTERNET)

ONT was connect to the GPON port 2 with ONU_ID 21

1. Create DBA-profile

OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000

2. Authorize ONT – set correct serial number and password (register method A)

OLT1404A(config)# remote ont ont-2-21
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD8B8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# host-ip vlan 400
OLT1404A(config-ont)# no inactive

3. Set uniport configuration

OLT1404A(config)# remote uniport uniport-2-21-2-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan all gemport 258 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# no inactive

4. Verify ONT ip-host 1 address

OLT1404A# show remote ont ont-2-21 ontWan-status
  -------------------------------------------------------------------------------------------------------
  Wan 1                                : Enable
  Connection Type                      : IPoE
  Status                               : Down
  Nat                                  : Disable
  Service                              :
  Default Wan                          : Disable
  Vlan                                 : 400
  Priority                             : 0
  Auto get IP                          : Disable
  IP address                           : 172.17.60.122
  IP Mask                              : 255.255.254.0
  Gateway                              : 172.17.60.1
  Primary DNS                          : 172.16.16.240
  Secondary DNS                        : 185.228.168.10
  Binding lan port                     :
  Binding wifi 2.4G ssid               : N/A
  Binding wifi 5G ssid                 : N/A
  -------------------------------------------------------------------------------------------------------

2. ONT Configuration (Access mode, only IPTV)

ONT was connect to the GPON port 2 with ONU_ID 22

1. Create DBA-profile

OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000

2. Authorize ONT – set correct serial number and password (register method A)

OLT1404A(config)# remote ont ont-2-22
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD8B8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# host-ip vlan 400
OLT1404A(config-ont)# no inactive

3. Set uniport configuration

OLT1404A(config)# remote uniport uniport-2-22-2-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan all gemport 258 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel all
OLT1404A(config-remote-veip-uniport)# no inactive

4. Verify ONT ip-host 1 address

OLT1404A# show remote ont ont-2-22 ontWan-status
  -------------------------------------------------------------------------------------------------------
  Wan 1                                : Enable
  Connection Type                      : IPoE
  Status                               : Down
  Nat                                  : Disable
  Service                              :
  Default Wan                          : Disable
  Vlan                                 : 400
  Priority                             : 0
  Auto get IP                          : Disable
  IP address                           : 172.17.60.122
  IP Mask                              : 255.255.254.0
  Gateway                              : 172.17.60.1
  Primary DNS                          : 172.16.16.240
  Secondary DNS                        : 185.228.168.10
  Binding lan port                     :
  Binding wifi 2.4G ssid               : N/A
  Binding wifi 5G ssid                 : N/A
  -------------------------------------------------------------------------------------------------------

ONT HL-1GE / HL-1GE2 HGU Provisioning on ZYXEL OLT1404A/OLT1408A

There are way to ONT provisioning:

• DHCP option 66,67 (link)

ONT HL-1GE / HL-1GE2 HGU upgrade on ZYXEL OLT1404A/OLT1408A

HL-1GE / HL-1GE2 can be upgrade the same way as other HALNy ONTs, You can find upgrade procedure here.

---