[ZTE] C6XX Series OLT Integration with HALNy SFU 1 LAN

Created On23 June 2025

Last Updated On16 July 2025

byAdrian Puk

HALNy Integration

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 400 – MGMT

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

2. Create ONT Type
Attention: Following configuration example is based on the HL-1GE model, which features 1 LAN port. Adjust the configuration as needed to suit your ONT model.

View ONT port table

Change HL-MODEL string to exact model name of the ONT.

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 15 type HL-MODEL sn HALN08196630

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

(config)# interface gpon-onu_1/3/3:15 
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport-map 1 1 vlan 100
  vport-map 2 2 vlan 400

5. Create vlan-profile (for IP host 1)

onu profile vlan tag400 tag-mode tag cvlan 400

6. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:15
  service 1 gemport 1 vlan 100
  service 2 gemport 2 vlan 400
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
  vlan port eth_0/1 mode hybrid def-vlan 100

7. Configure vports.

interface vport-1/3/3.15:1
  service-port 1 user-vlan 100 vlan 100
$
interface vport-1/3/3.15:2
  service-port 3 user-vlan 400 vlan 400

8. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:15
Host ID:            1
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.A219.6630
Current IP address: 172.17.60.21
Current mask:       255.255.254.0
Current gateway:    172.17.60.1
Current primary DNS:172.17.61.224
Current second DNS: 172.17.60.1
Domain name:

2. ONT configuration (Access mode, IPTV)

In example configuration we used below VLANs:
VLAN 200 – IPTV
VLAN 400 – MGMT

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

2. Create ONT Type
Attention: Following configuration example is based on the HL-1GE model, which features 1 LAN port. Adjust the configuration as needed to suit your ONT model.

View ONT port table

Change HL-MODEL string to exact model name of the ONT.

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 16 type HL-MODEL sn HALN08196630

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

(config)# interface gpon-onu_1/3/3:16 
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport-map 1 1 vlan 200
  vport-map 2 2 vlan 400

5. Create igmp profile

(config-gpon)#onu profile igmp 200 down-tag strip

6. Create vlan-profile (for IP host 1)

(config-gpon)#onu profile vlan tag400 tag-mode tag cvlan 400

7. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:16
  mvlan 200
  service 1 gemport 1 vlan 200
  service 2 gemport 2 vlan 400
  igmp eth_0/1 profile 200
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
  vlan port eth_0/1 mode hybrid def-vlan 200

8. Configure vports.

(config)#interface vport-1/3/3.16:1
  service-port 1 user-vlan 200 vlan 200
  igmp fast-leave enable
  igmp version v2
$
(config)#interface vport-1/3/3.16:2
  service-port 2 user-vlan 400 vlan 400

9. Configure IGMP Snooping

(config)# igmp querygemport-mode both
(config)# igmp  mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.16:1
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping

10. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:16
Host ID:            1
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.A219.6630
Current IP address: 172.17.60.21
Current mask:       255.255.254.0
Current gateway:    172.17.60.1
Current primary DNS:172.17.61.224
Current second DNS: 172.17.60.1
Domain name:

3. ONT configuration (Transparent mode)

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV
VLAN 300 – VoIP
VLAN 400 – MGMT

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

2. Create ONT Type
Attention: Following configuration example is based on the HL-1GE model, which features 1 LAN port. Adjust the configuration as needed to suit your ONT model.

View ONT port table

Change HL-MODEL string to exact model name of the ONT.

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 17 type HL-MODEL sn HALN08196630

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

(config)# interface gpon-onu_1/3/3:17 
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  tcont 3 profile MAX
  tcont 4 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  gemport 3 tcont 3
  gemport 4 tcont 4
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport 3 map-type vlan
  vport 4 map-type vlan
  vport-map 1 1 vlan 100
  vport-map 2 2 vlan 200
  vport-map 3 3 vlan 300
  vport-map 4 4 vlan 400

5. Create igmp profile

(config-gpon)#onu profile igmp 200T down-tag transparent tag transparent

6. Create vlan-profile (for IP host 1)

(config-gpon)#onu profile vlan tag400 tag-mode tag cvlan 400

7. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:17
  mvlan 200
  service 1 gemport 1 vlan 100
  service 2 gemport 2 vlan 200
  service 3 gemport 3 vlan 300
  service 4 gemport 4 vlan 400
  igmp eth_0/1 profile 200T
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
  vlan port eth_0/1 mode trunk
  vlan port eth_0/1 vlan 100,200,300

8. Configure vports.

(config)# interface vport-1/3/3.17:1
  service-port 1 user-vlan 100 vlan 100
$
(config)# interface vport-1/3/3.17:2
  service-port 2 user-vlan 200 vlan 200
  igmp fast-leave enable
  igmp version v2
$
(config)# interface vport-1/3/3.17:3
  service-port 3 user-vlan 300 vlan 300
$
(config)# interface vport-1/3/3.17:4
  service-port 4 user-vlan 400 vlan 400

9. Configure IGMP Snooping

(config)# igmp querygemport-mode both
(config)# igmp  mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.17:2
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping

10. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:17
Host ID:            1
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.A219.6630
Current IP address: 172.17.60.21
Current mask:       255.255.254.0
Current gateway:    172.17.60.1
Current primary DNS:172.17.61.224
Current second DNS: 172.17.60.1
Domain name:

4. ONT configuration (VLAN translation – rBSA)

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV
VLAN 300 – VoIP
VLAN 400 – MGMT

To translate multicast VLAN, there is needed to add following command in global OLT configuration:

(config)#mvlan-translate 200 to 838

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

2. Create ONT Type
Attention: Following configuration example is based on the HL-1GE model, which features 1 LAN port. Adjust the configuration as needed to suit your ONT model.

View ONT port table

Change HL-MODEL string to exact model name of the ONT.

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 18 type HL-MODEL sn HALN08196630

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

(config)# interface gpon-onu_1/3/3:18
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  tcont 3 profile MAX
  tcont 4 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  gemport 3 tcont 3
  gemport 4 tcont 4
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport 3 map-type vlan
  vport 4 map-type vlan
  vport-map 1 1 vlan 35
  vport-map 2 2 vlan 838
  vport-map 3 3 vlan 839
  vport-map 4 4 vlan 400

5. Create vlan-profile (for IP host 1)

(config-gpon)#onu profile vlan tag400 tag-mode tag cvlan 400

6. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:18
  mvlan 838
  service 1 gemport 1 vlan 35
  service 2 gemport 2 vlan 838
  service 3 gemport 3 vlan 839
  service 4 gemport 4 vlan 400
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
  vlan port eth_0/1 mode trunk
  vlan port eth_0/1 vlan 35,838,839

7. Configure vports.

(config)# interface vport-1/3/3.18:1
  service-port 1 user-vlan 35 vlan 100
$
(config)# interface vport-1/3/3.18:2
  service-port 2 user-vlan 838 vlan 200
  igmp fast-leave enable
  igmp version v2
$
(config)# interface vport-1/3/3.18:3
  service-port 3 user-vlan 839 vlan 300
$
(config)# interface vport-1/3/3.18:4
  service-port 4 user-vlan 400 vlan 400

8. Configure IGMP Snooping

(config)# igmp querygemport-mode both
(config)# igmp  mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.18:2
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping

9. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:18
Host ID:            1
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.A219.6630
Current IP address: 172.17.60.21
Current mask:       255.255.254.0
Current gateway:    172.17.60.1
Current primary DNS:172.17.61.224
Current second DNS: 172.17.60.1
Domain name:

5. ONT configuration (802.1q in 802.1q Begin/End of Tunnel)

1. Create DBA Profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

2. Create ONT Type

Attention: Following configuration example is based on the HL-1GE model, which features 1 LAN port. Adjust the configuration as needed to suit your ONT model.

View ONT port table

Change HL-MODEL string to exact model name of the ONT.

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 17 type HL-MODEL sn HALN08196630

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

# interface gpon-onu_1/3/3:18
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  tcont 3 profile MAX
  tcont 4 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  gemport 3 tcont 3
  gemport 4 tcont 4
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport 3 map-type vlan
  vport 4 map-type vlan
  vport-map 1 1 vlan 100
  vport-map 2 2 vlan 200
  vport-map 1 1 vlan 300
  vport-map 2 2 vlan 400

5. Create igmp profile

(config-gpon)#onu profile igmp 200T down-tag transparent tag transparent

6. Create vlan-profile (for IP host 1)

(config-gpon)#onu profile vlan tag400 tag-mode tag cvlan 400

7. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:18
  mvlan 200
  service 1 gemport 1 vlan 100
  service 2 gemport 2 vlan 200
  service 3 gemport 3 vlan 300
  service 4 gemport 4 vlan 400
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
  vlan port eth_0/1 mode trunk
  vlan port eth_0/1 vlan 100,200,300

8. Configure vports

(config)# interface vport-1/3/3.18:1
  service-port 1 user-vlan 100 vlan 100 svlan 999
$
(config)# interface vport-1/3/3.18:2
  service-port 2 user-vlan 200 vlan 200 svlan 999
  igmp fast-leave enable
  igmp version v2
$
(config)# interface vport-1/3/3.18:3
  service-port 3 user-vlan 300 vlan 300 svlan 999
$
(config)# interface vport-1/3/3.18:4
  service-port 4 user-vlan 400 vlan 400

9. Configure IGMP Snooping

(config)# igmp querygemport-mode both
(config)# igmp  mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.18:2
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping

ONT Managment

Note: Most provisioning and upgrade options below require ONT to have a valid IP Host setup. For detailed information regarding IP Host click here.

Method	Configuration	Upgrade
Rest API V2	[Example]	–
XML Provisioning [DHCP 66/67, WEB]	[Example]	–
OTT	–	[Example]
OLT CLI	–	[Example]
TR-069 [OLT CLI, DHCP 43]	[Example]	[Example]
WEB	[Example]	[Example]

Found something we can improve? Let us know at support@halny.com

Tags:


GPON ONTs
Model	LAN ports	VoIP FXS POTS port	RF/CATV overlay
HL-GSFP	1 x SFP 1GbE/2.5GbE	-	-
HL-1G	1×10/100/1000	-	-
HL-1GE	1×10/100/1000	-	-
HL-1GE2	1×10/100/1000	-	-
HL-1GC	1×10/100/1000	-	-
HL-1GR	1×10/100/1000	-	1
HL-1B	1×100/1000/2500	-
HL-2GRV	2×10/100/1000	1	1
HL-2BV	1×1000/2500 1×10/100/1000	1	-
HL-4G	4×10/100/1000	-	-
HL-4G2	4×10/100/1000	-	-
HL-4GV	4×10/100/1000	1	-
HL-4GMV	4×10/100/1000	2	-
HL-4GMV2	4×10/100/1000	2	-
HL-4GMV3	4×10/100/1000	1	-
HL-4GMV4	4×10/100/1000	1	-
HL-4GMVR	4×10/100/1000	1	1
HL-4GQV	4×10/100/1000	2	-
HL-4GQVS	4×10/100/1000	1	-
HL-4GQVS2	4×10/100/1000	1	-
HL-4GXV	4×10/100/1000	1	-
HL-4GXV-F	4×10/100/1000	1	-
HL-4GXVU-F	4×10/100/1000	1	-
HL-4BX3V-F	3×10/100/1000 1×2500	1	-
HL-4GX3VR	4×10/100/1000	1	1
XGSPON ONTs
HLX-SFPX	1x SFP+ 1GbE/2.5GbE/10GbE	-	-
HLX-1TL	1×1000/2500/10000	-	-
HLX-1TLV	1×1000/2500/10000	1	-
HLX-TGV	1×1000/2500/5000/10000 1×10/100/1000	2	-


Model	WAN ports	LAN ports	WiFi	WiFi speed	Antennas	VoIP	Sales Status
Ethernet Routers
HLE-3GX-F	1×10/100/1000	3×10/100/1000	2T2R WiFi6	1800AX	Internal	-	In daily sales
HLE-4BX3V-F	1×100/1000/2500 Ethernet	3×10/100/1000 + 1×2500	2T2R WiFi6	WiFi6 AX3000	Internal	1xFXS	Coming soon!
Active Ethernet (SFP WAN)
HLS-4BX3V-F	1×1000/2500 SFP port	3×10/100/1000 + 1×2500	2T2R WiFi6	WiFi6 AX3000	Internal	1xFXS	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	-	In daily sales


Model Name	Mode	LAN	VoIP	WiFi	Mode button	Sales Status
HLX-SFPX	SFU (Bridge only)	1x1000/10000	-	-	-	New one! In daily sales
HLX-1TL	SFU (Bridge only)	1x1000/2500/10000	-	-	-	Coming soon! Q1-25
HLX-1TLV	SFU (Bridge only)	1x1000/2500/10000	1	-	-	New one! In daily sales
HLX-TGV	SFU (bridge) HGU (router NAT)	1x1000/2500/10000 1x10/100/1000	2	-	-	In daily sales
HLX-4BYV-F	HGU (router NAT)	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Triband 2.4/5/6GHz	Yes	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	In daily sales


Model	LAN ports	VoIP FXS POTS port	WiFi	WiFi antennas grain and type	WiFi speed	RF/CATV overlay	EtherWAN (LAN4 as Wan port)	USB port	SALES STATUS
HL-GSFP	SFP 1GbE/2.5GbE	-	-	-	-	-	-	-	In daily sales
HL-1GE	1×10/100/1000	-	-	-	-	-	-	-	In daily sales
HL-1GC	1×10/100/1000	-	-	-	-	-	-	-	In daily sales
HL-1B	1×100/1000/2500	-	-	-	-	-	-	-	New one! In daily sales
HL-4G2	4×10/100/1000	-	-	-	-	-	-	-	New one! In daily sales
HL-1GR	1×10/100/1000	-	-	-	-	1	-	-	In daily sales
HL-2BV	1×1000/2500 1×10/100/1000	1	-	-	-	-	-	-	In daily sales
HL-4GV	4×10/100/1000	2	-	-	-	-	-	-	New one! In daily sales
HL-4GMV2	4×10/100/1000	2	2T2R 802.11n 2T2R 802.11ac wave2	2x5dB (external)	866Mbps 5Ghz 300Mbps 2.4Ghz	-	YES	-	In daily sales
HL-4GMVR	4×10/100/1000	1	2T2R 802.11n 2T2R 802.11ac wave2	4x5dB (external)	866Mbps 5Ghz 300Mbps 2.4Ghz	1	YES	-	In daily sales
HL-4GX3VR	4×10/100/1000	1	2T2R AX3000 WiFi6	4x5dB (external)	3000Mbps for 2.4Ghz / 5Ghz	1	YES	-	New one! In daily sales
HL-4GXV-F	4×10/100/1000	1	802.11ax 1800AX WiFi6	2x2 internal	1800Mbs for 2.4Ghz / 5Ghz	-	YES	-	In daily sales
HL-4GXVU-F	4×10/100/1000	1	802.11ax 1800AX WiFi6	2x2 internal	1800Mbs for 2.4Ghz / 5Ghz	-	YES	1	New one! In daily sales
HL-4BX3V-F	3×10/100/1000 1×2500	1	2T3R AX3000 WiFi6	2x3 Internal	3000Mbs for 2.4Ghz / 5Ghz	-	YES	-	New one! In daily sales
HL-4BY3V-F	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Dual-Band 2.4Ghz/5Ghz	Internal	BE3600	-	YES	-	Coming soon!
HL-4BY7V-F	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Dual-Band 2.4Ghz/5Ghz 4x4	Internal	BE7200	-	YES	-	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	-	-	-	In daily sales

Have a Question?

[ZTE] C6XX Series OLT Integration with HALNy SFU 1 LAN

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

2. ONT configuration (Access mode, IPTV)

3. ONT configuration (Transparent mode)

4. ONT configuration (VLAN translation – rBSA)

5. ONT configuration (802.1q in 802.1q Begin/End of Tunnel)

ONT Managment