[ZTE] C6XX Series OLT Integration with HALNy HGU

HALNy Integration

HALNy ONTs can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
SFU mode configuration is presented here.
SFU mode allows to prepare different configurations – such as QinQ tunnel or VLAN translation on the ONT. In this tutorial, we will focus on HGU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

Supported service scenarios

This tutorial is based on ONT with firmware V2.0.26 and ZTE C610 running with firmware V1.2.2.

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 1/1/6)
VLAN 400 – MGMT 

1. ONT Configuration (Access mode, only INTERNET)

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

2. Create ONT Type
Attention: Following configuration example is based on the HL-4GMV2 model, which features 4 LAN ports and 2 POTS ports. Adjust the configuration as needed to suit your ONT model.
Change HL-MODEL string to exact model name of the ONT.

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1
  onu-type-if HL-MODEL eth_0/2
  onu-type-if HL-MODEL eth_0/3
  onu-type-if HL-MODEL eth_0/4
  onu-type-if HL-MODEL pots_0/1
  onu-type-if HL-MODEL pots_0/2

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 13 type HL-MODEL sn HALN08196630

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

(config)# interface gpon-onu_1/3/3:13 
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport-map 1 1 vlan 100
  vport-map 2 2 vlan 400

5. Create vlan-profile (for IP host 1)

onu profile vlan tag400 tag-mode tag cvlan 400

6. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:13
  mvlan 400
  service 1 gemport 1 vlan 100
  service 2 gemport 2 vlan 400
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1

7. Configure vports.

interface vport-1/3/3.13:1
  service-port 1 user-vlan 100 vlan 100
$
interface vport-1/3/3.13:2
  service-port 3 user-vlan 400 vlan 400

8. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:13
Host ID:            1
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.A219.6630
Current IP address: 172.17.60.21
Current mask:       255.255.254.0
Current gateway:    172.17.60.1
Current primary DNS:172.17.61.224
Current second DNS: 172.17.60.1
Domain name:

2. ONT Configuration (Access mode, only IPTV)

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

2. Create ONT Type
Attention: Following configuration example is based on the HL-4GMV2 model, which features 4 LAN ports and 2 POTS ports. Adjust the configuration as needed to suit your ONT model.
Change HL-MODEL string to exact model name of the ONT.

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1
  onu-type-if HL-MODEL eth_0/2
  onu-type-if HL-MODEL eth_0/3
  onu-type-if HL-MODEL eth_0/4
  onu-type-if HL-MODEL pots_0/1
  onu-type-if HL-MODEL pots_0/2

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 14 type HL-MODEL sn HALN08196630

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

(config)# interface gpon-onu_1/3/3:14 
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport-map 1 1 vlan 200
  vport-map 2 2 vlan 400

5. Create igmp profile

onu profile igmp 200 down-tag strip

6. Create vlan-profile (for IP host 1)

onu profile vlan tag400 tag-mode tag cvlan 400

7. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:14
  mvlan 200
  service 1 gemport 1 vlan 200
  service 2 gemport 2 vlan 400
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1

8. Configure vports.

interface vport-1/3/3.14:1
  service-port 2 user-vlan 200 vlan 200
  igmp fast-leave enable
  igmp version v2
$
interface vport-1/3/3.14:2
  service-port 3 user-vlan 400 vlan 400

9. Configure IGMP Snooping

(config)# igmp querygemport-mode both
(config)# igmp  mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.14:1
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping

10. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:14
Host ID:            1
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.A219.6630
Current IP address: 172.17.60.21
Current mask:       255.255.254.0
Current gateway:    172.17.60.1
Current primary DNS:172.17.61.224
Current second DNS: 172.17.60.1
Domain name:

ONT Provisioning on ZTE C610

There are two ways of ONT provisioning:

• DHCP option 66,67 (link)
• TR-069 (link)

ONT Upgrade on ZTE C610

Upgrade procedure for HALNy ONTs (link)