Have a Question?
[RAISECOM] ISCOM 5508 OLT Integration with HALNy HGU

HALNy Integration
Supported HGU service scenario
ONT is connected to the port 1/1

Attention: Before configuring ONT you must change vendor serial number!
- Log in to ONT via LAN: 192.168.33.1/cgi-bin/vendor-support.asp.
- Change Vendor to RAISECOM RCMG
- Apply configuration, ONT will reboot
More information regarding ONT vendor serial number change can be found here
1.Create DBA profile:
create dba-profile 3 name DBA type3 assure 10240 max 1024000
2. Create gpon-onu-line profile
gpon-onu-line-profile 17
mapping-mode port
create tcont 1 dba-profile 3
create tcont 2 dba-profile 3
create gem 1 tcont 1
commit
gem 1 mapping 1 ip-host 1
commit
create gem 2 tcont 2
commit
gem 2 mapping 1 veip 1
commit
quit
3. Create gpon-onu-service-profile
gpon-onu-service-profile 17
port-num veip 1
iphost-num 1
iphost 1 mode dhcp
iphost 1 native vlan 400
iphost 1 service management
commit
quit
4. Create ONT
create gpon-onu 1 sn RCMG206D8538 line-profile-id 17 service-profile-id 17
5. Display ONT ip-host 1 address
GPON(config)#show gpon-onu 1/1/1 iphost
ONU ID: 1/1/1
Iphost ID : 1
Mode : dhcp
IP Type : ipv4
IP Address : 0.0.0.0
Mask : 0.0.0.0
Default-gw : 0.0.0.0
VLAN : 400
Priority : 0
Allowed vlan : n/a
Pri-dns : 0.0.0.0
Sec-dns : 0.0.0.0
Sec-dns : e05a.9f6d.8538
PPPoe Username :
PPPoe Password :
Current IPAddr : 10.20.30.134
Current Mask : 255.255.255.0
Current-gw : 10.20.30.1
Current Pri-dns : 0.0.0.0
Current Sec-dns : 0.0.0.0
IPv6LinkLocalAddr : ::
IPv6Addr : ::
IPv6DefaultRouter : ::
IPv6PrimaryDNS : ::
IPv6SecondaryDNS : ::
IPv6DUID :
ONT Managment
Note: Most provisioning and upgrade options below require ONT to have a valid IP Host setup. For detailed information regarding IP Host click here.
| Method | Configuration | Upgrade |
| Rest API V2 | [Example] | – |
| XML Provisioning [DHCP 66/67, WEB] | [Example] | – |
| OTT | – | [Example] |
| OLT OMCI | – | [Example] |
| TR-069 [DHCP 43] | [Example] | [Example] |
| WEB | [Example] | [Example] |
| Found something we can improve? Let us know at support@halny.com |
