How Can We Help?

HLX-TGV SFU Configuration [HUAWEI]

Created On
Last Updated On
byDaniel M
You are here:
< All Topics

HALNy HLX-TGV Configuration

Service scenario

HLX-TGV can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
SFU mode allows to prepare different configurations – such as QiQ tunnel or VLAN translation on the ONT. In this tutorial we will focus on SFU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

Document Date and version2024.05.20
Tested on OLT Huawei MA5800-X2Version: V100R019C12SPH232
Tested with ONT HALNy HLX-TGVSupported on Version: V6.0.4 or above
Revision1
Let us know how to improve below document on: support@halny.com

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

ONT was connect to GPON port 1 (slot 0) with ONU_ID 25

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 400 – MGMT 

1. Create DBA profile

MA5800(config)#dba-profile add profile-id 21 profile-name "XGS-PON_DBA" type4 max 10000000

2. Create ONT srvprofile

MA5800(config)#ont-srvprofile gpon profile-id 147 profile-name "HLX-TGV_SFU_INT"
  ont-port pots 2 eth 2
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 2 translation 100 user-vlan 100
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5800(config)#ont-lineprofile gpon profile-id 147 profile-name "HLX-TGV_SFU_INT"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 400
  commit
  quit

4. Register ONT on GPON

MA5800(config)#interface gpon 0/0
MA5800(config-if-gpon-0/0)#ont add 1 25 sn-auth "48414C4E922D92D8" omci ont-lineprofile-id 147 ont-srvprofile-id 147 desc "HLX-TGV_SFU_INT"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 25 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5800(config)#interface gpon 0/0
MA5800(config-if-gpon-0/0)#ont port native-vlan 1 25 eth 1 vlan 100 priority 0
MA5800(config-if-gpon-0/0)#ont port native-vlan 1 25 eth 2 vlan 100 priority 0

6. Create bbs-config

MA5800(config)#service-port 128 vlan 100 gpon 0/0/1 ont 25 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5800(config)#service-port 129 vlan 400 gpon 0/0/1 ont 25 gemport 1 multi-service user-vlan 400 tag-transform translate

7. Verify ONT ip-host IP address

MA5800(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.61.159
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : 54DB-A22D-92D8
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

2. ONT configuration (Access mode, INTERNET + IPTV)

ONT was connect to GPON port 1 (slot 0) with ONU_ID 26

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 400 – MGMT 

1. Create DBA profile

MA5800(config)#dba-profile add profile-id 21 profile-name "XGS-PON_DBA" type4 max 10000000

2. Create ONT srvprofile

MA5800(config)#ont-srvprofile gpon profile-id 148 profile-name "HLX-TGV_SFU_INT_IPTV"
  ont-port pots 2 eth 2
  multicast mode igmp-snooping
  port vlan eth 1 translation 200 user-vlan 200
  port vlan eth 2 translation 100 user-vlan 100
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ont-line-profile

MA5800(config)#ont-lineprofile gpon profile-id 148 profile-name "HLX-TGV_SFU_INT_IPTV"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 400
  commit
  quit

4. Register ONT on GPON

MA5800(config)#interface gpon 0/0
MA5800(config-if-gpon-0/0)#ont add 1 26 sn-auth "48414C4E922D92D8" omci ont-lineprofile-id 148 ont-srvprofile-id 148 desc "HLX-TGV_SFU_INT_IPTV"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 26 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5800(config)#interface gpon 0/0
MA5800(config-if-gpon-0/0)#ont port native-vlan 1 26 eth 1 vlan 200 priority 0
MA5800(config-if-gpon-0/0)#ont port native-vlan 1 26 eth 2 vlan 100 priority 0

6. Create bbs-config

MA5800(config)#service-port 130 vlan 100 gpon 0/0/1 ont 26 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5800(config)#service-port 131 vlan 200 gpon 0/0/1 ont 26 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5800(config)#service-port 132 vlan 400 gpon 0/0/1 ont 26 gemport 2 multi-service user-vlan 400 tag-transform translate

7. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 131 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 131
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

8. Verify ONT ip-host IP address

MA5800(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.61.159
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : 54DB-A22D-92D8
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

3. ONT configuration (TRANSPARENT mode)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 27

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 300 – VoIP
VLAN 400 – MGMT 

1. Create DBA-profile

MA5800(config)#dba-profile add profile-id 21 profile-name "XGS-PON_DBA" type4 max 10000000

2. Create ONT srvprofile

MA5800(config)#ont-srvprofile gpon profile-id 149 profile-name "HLX-TGV_SFU_TRANSPARENT"
  ont-port pots 2 eth 2
  multicast-forward tag translation 200
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 1 translation 200 user-vlan 200
  port vlan eth 1 translation 300 user-vlan 300
  port vlan eth 2 translation 100 user-vlan 100
  port vlan eth 2 translation 200 user-vlan 200
  port vlan eth 2 translation 300 user-vlan 300
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5800(config)#ont-lineprofile gpon profile-id 149 profile-name "HLX-TGV_SFU_INT_TRANSPARENT"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

*HLX-TGV SFU suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 1 27 sn-auth "48414C4E922D92D8" omci ont-lineprofile-id 148 ont-srvprofile-id 148 desc "HLX-TGV_SFU_TRANSPARENT"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 27 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)#service-port 133 vlan 100 gpon 0/0/1 ont 27 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 134 vlan 200 gpon 0/0/1 ont 27 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 135 vlan 300 gpon 0/0/1 ont 27 gemport 2 multi-service user-vlan 300 tag-transform translate
MA5683T(config)#service-port 136 vlan 400 gpon 0/0/1 ont 27 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 134 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 134
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

7. Verify ONT ip-host IP address

MA5800(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.61.159
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : 54DB-A22D-92D8
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

4. ONT configuration (VLAN translation – rBSA)

ONT was connect to GPON port 1 (slot 0) with ONU_ID 28

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 300 – VoIP
VLAN 400 – MGMT 

1. Create DBA-profile

MA5800(config)#dba-profile add profile-id 21 profile-name "XGS-PON_DBA" type4 max 10000000

2. Create ONT srvprofile

MA5800(config)#ont-srvprofile gpon profile-id 150 profile-name "HLX-TGV_SFU_TRANSPARENT"
  ont-port pots 2 eth 2
  multicast-forward tag translation 838
  port vlan eth 1 translation 100 user-vlan 35
  port vlan eth 1 translation 200 user-vlan 838
  port vlan eth 1 translation 300 user-vlan 839
  port vlan eth 2 translation 100 user-vlan 35
  port vlan eth 2 translation 200 user-vlan 838
  port vlan eth 2 translation 300 user-vlan 839
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5800(config)#ont-lineprofile gpon profile-id 150 profile-name "HLX-TGV_SFU_INT_TRANSLATION"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

*HLX-TGV SFU suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 1 28 sn-auth "48414C4E922D92D8" omci ont-lineprofile-id 150 ont-srvprofile-id 150 desc "HLX-TGV_SFU_INT_TRANSLATION"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 28 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)#service-port 137 vlan 100 gpon 0/0/1 ont 28 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 138 vlan 200 gpon 0/0/1 ont 28 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 139 vlan 300 gpon 0/0/1 ont 28 gemport 2 multi-service user-vlan 300 tag-transform translate
MA5683T(config)#service-port 140 vlan 400 gpon 0/0/1 ont 28 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 138 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 138
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

7. Verify ONT ip-host 1 IP address

MA5800(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.61.159
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : 54DB-A22D-92D8
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

ONT HLX-TGV SFU Upgrade on HUAWEI MA5800-X2

HLX-TGV SFU can be upgrade the same way as other HALNy ONTs, You can find upgrade procedure here.

Table of Contents
Hit enter to search or ESC to close

Search Page

The beauty of this theme is that is built with Modules. Every time you can active or dis-active any module that you would not need anymore ! Awesome WordPress Theme with latest technologies.

May We Suggest?