ONT HALNy Upgrade on HUAWEI MA5600T / MA5683T / MA5800-X15

You are here:
< All Topics
Document Date and version2020.05.29
Tested on OLT Huawei MA5683TVersion: MA5600V800R017C10
Tested with ONT HALNy HL-1GESupported on Version: V2.0.10 or above
Tested with ONT HALNy HL-4GSupported on Version: V2.0.10 or above
Tested with ONT HALNy HL-4GMVSupported on Version: V2.0.10 or above
Tested with ONT HALNy HL-2GRVSupported on Version: V3.0.3 or above
Tested with ONT HALNy HL-4GQVSupported on Version: V3.0.3 or above
Tested with ONT HALNy HL-4GQVSSupported on Version: V3.0.3 or above
Tested with ONT HALNy HL-1G/HL-GSFPSupported on Version: 1.0.8 or above
Revision1
Let us know how to improve below document on: support@halny.com

Upgrade procedure on HUAWEI MA5683T

1. Prepare FTP server and put tar.gz archive on it. Make sure FTP Server is available from OLT

Here is description how archive file should be created.

2. Open diagnose mode

MA5683T(config)#diagnose

3. Define parameters of download FW

MA5683T(diagnose)%%ont-load info program archive.tar.gz ftp X.X.X.X FTP_USER FTP_PASS

4. Choose ONT which You want to upgrade

MA5683T(diagnose)%%ont-load select FRAME/SLOT PORT-ID ONT-ID

You can choose group of ONTs

MA5683T(diagnose)%%ont-load select FRAME/SLOT PORT-ID ONT-ID_1
MA5683T(diagnose)%%ont-load select FRAME/SLOT PORT-ID ONT-ID_2
                               ...
MA5683T(diagnose)%%ont-load select FRAME/SLOT PORT-ID ONT-ID_n

5. Run upgrade procedure

MA5683T(diagnose)%%ont-load start

6. Check upgrade status

MA5683T(diagnose)%%display ont-load select FRAME/SLOT PORT-ID ONT-ID
--------------------------------------------------------------
F/S/P ONT ID Load state Load progress 
--------------------------------------------------------------
0/0/1 1 loading 80%
--------------------------------------------------------------
MA5683T(diagnose)%%display ont-load select FRAME/SLOT PORT-ID ONT-ID
--------------------------------------------------------------
F/S/P ONT ID Load state Load progress 
--------------------------------------------------------------
0/0/1 1 success 100%
--------------------------------------------------------------

7. Stop upgrade procedure if upgrade completed with success status on all ONTs

MA5683T(diagnose)%%ont-load stop

8. Change active FW, restart ONT

MA5683T(config-if-gpon-0/0)#ont reset PORT-ID ONT-ID
Table of Contents