How Can We Help?

HL-2BV SFU Configuration [HUAWEI]

Created On
Last Updated On
byDaniel M
You are here:
< All Topics
HL-2BV

HALNy HL-2BV Configuration

Service scenario

HL-2BV can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
SFU mode allows to prepare different configurations – such a VLAN translation on the ONT. In this tutorial we will focus on SFU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

Document Date and version2023.01.02
Tested on OLT Huawei MA5683TVersion: MA5600V800R017C10
Tested with ONT HALNy HL-2GRV SFUSupported on Version: V4.0.3 or above
Revision1
Let us know how to improve below document on: support@halny.com

ONT Configuration

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 37

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 400 – MGMT 

1. Create DBA profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 154 profile-name "HL-2BV_SFU_INT"
  ont-port pots 1 eth 2
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 2 translation 100 user-vlan 100
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 154 profile-name "HL-2BV_SFU_INT"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 400
  commit
  quit

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 37 sn-auth "48414C4E5A6FA670" omci ont-lineprofile-id 154 ont-srvprofile-id 154 desc "HL-2BV_SFU_INT"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 37 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5683T(config)# interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 37 eth 1 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 37 eth 2 vlan 100 priority 0

6. Create bbs-config

MA5683T(config)#service-port 134 vlan 100 gpon 0/0/0 ont 37 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 135 vlan 400 gpon 0/0/0 ont 37 gemport 1 multi-service user-vlan 400 tag-transform translate

7. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.133
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.17.60.1
  ONT slave DNS            : -
  ONT MAC                  : E05A-9F6F-A670
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

2.ONT configuration (Access mode, INTERNET+IPTV)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 38

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 400 – MGMT 

1. Create DBA profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 155 profile-name "HL-2BV_SFU_INT_IPTV"
  ont-port pots 1 eth 2
  multicast mode igmp-snooping
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 2 translation 200 user-vlan 200
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 155 profile-name "HL-2BV_SFU_INT_IPTV"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 400
  commit
  quit

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 38 sn-auth "48414C4E5A6FA670" omci ont-lineprofile-id 155 ont-srvprofile-id 155 desc "HL-2BV_SFU_INT_IPTV"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 38 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 38 eth 1 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 38 eth 2 vlan 200 priority 0

6. Create bbs-config

MA5683T(config)#service-port 136 vlan 100 gpon 0/0/0 ont 38 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 137 vlan 200 gpon 0/0/0 ont 38 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 138 vlan 400 gpon 0/0/0 ont 38 gemport 2 multi-service user-vlan 400 tag-transform translate

7. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 137 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 137
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

8. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.133
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.17.60.1
  ONT slave DNS            : -
  ONT MAC                  : E05A-9F6F-A670
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

3. ONT configuration (TRANSPARENT mode)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 39

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 300 – VoIP
VLAN 400 – MGMT 

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 156 profile-name "HL-2BV_SFU_TRANS"
  ont-port pots 1 eth 2
  igmp-forward translation 200
  multicast-forward tag translation 200
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 1 translation 200 user-vlan 200
  port vlan eth 1 translation 300 user-vlan 300
  port vlan eth 2 translation 100 user-vlan 100
  port vlan eth 2 translation 200 user-vlan 200
  port vlan eth 2 translation 300 user-vlan 300
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 156 profile-name "HL-2BV_SFU_TRANS"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

*HL-2GRV suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 39 sn-auth "48414C4E5A6FA670" omci ont-lineprofile-id 156 ont-srvprofile-id 156 desc "HL-2BV_SFU_TRANS"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 39 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)#service-port 139 vlan 100 gpon 0/0/0 ont 39 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 140 vlan 200 gpon 0/0/0 ont 39 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 141 vlan 300 gpon 0/0/0 ont 39 gemport 2 multi-service user-vlan 300 tag-transform translate
MA5683T(config)#service-port 142 vlan 400 gpon 0/0/0 ont 39 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 140 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 140
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

7. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.133
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.17.60.1
  ONT slave DNS            : -
  ONT MAC                  : E05A-9F6F-A670
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

4. ONT configuration (Hybrid mode)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 40

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 400 – MGMT 

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 157 profile-name "HL-2BV_SFU_HYBRID"
  ont-port pots 1 eth 2
  igmp-forward translation 200
  multicast-forward tag translation 200
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 1 translation 200 user-vlan 200
  port vlan eth 2 translation 100 user-vlan 100
  port vlan eth 2 translation 200 user-vlan 200
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 157 profile-name "HL-2BV_SFU_HYBRID"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 400
  commit
  quit

*HL-4G suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 40 sn-auth "48414C4E5A6FA670" omci ont-lineprofile-id 157 ont-srvprofile-id 157 desc "HL-2BV_SFU_HYBRID"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 40 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 40 eth 1 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 40 eth 2 vlan 100 priority 0

6. Create bbs-config

MA5683T(config)# service-port 143 vlan 100 gpon 0/0/0 ont 40 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 144 vlan 200 gpon 0/0/0 ont 40 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 145 vlan 400 gpon 0/0/0 ont 40 gemport 2 multi-service user-vlan 400 tag-transform translate

7. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 144 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 144
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

8. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.133
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.17.60.1
  ONT slave DNS            : -
  ONT MAC                  : E05A-9F6F-A670
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

5. ONT configuration (VLAN translation – rBSA)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 41

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 300 – VoIP
VLAN 400 – MGMT 

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 158 profile-name "HL-2BV_SFU_TRANSLATION"
  ont-port pots 1 eth 2 catv 1
  igmp-forward translation 200
  multicast-forward tag translation 838
  port vlan eth 1 translation 100 user-vlan 35
  port vlan eth 1 translation 200 user-vlan 838
  port vlan eth 1 translation 300 user-vlan 839
  port vlan eth 2 translation 100 user-vlan 35
  port vlan eth 2 translation 200 user-vlan 838
  port vlan eth 2 translation 300 user-vlan 839
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 158 profile-name "HL-2BV_SFU_TRANSLATION"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

*HL-4G suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 41 sn-auth "48414C4E5A6FA670" omci ont-lineprofile-id 153 ont-srvprofile-id 153 desc "HL-2BV_SFU_TRANSLATION"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 41 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)# service-port 146 vlan 100 gpon 0/0/0 ont 41 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 147 vlan 200 gpon 0/0/0 ont 41 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 148 vlan 300 gpon 0/0/0 ont 41 gemport 2 multi-service user-vlan 300 tag-transform translate
MA5683T(config)#service-port 149 vlan 400 gpon 0/0/0 ont 41 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 147 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 147
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

7. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.133
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.17.60.1
  ONT slave DNS            : -
  ONT MAC                  : E05A-9F6F-A670
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

ONT HL-2BV SFU Upgrade on HUAWEI MA5683T

HL-2BV SFU can be upgrade the same way as other HALNy ONTs, You can find upgrade procedure here.

Table of Contents
Hit enter to search or ESC to close

Search Page

The beauty of this theme is that is built with Modules. Every time you can active or dis-active any module that you would not need anymore ! Awesome WordPress Theme with latest technologies.

May We Suggest?