HL-4GMVR Configuration [HUAWEI]

Created On29 April 2025

Last Updated On9 May 2025

byDaniel Matuszek

HALNy HL-4GMV Configuration

Service scenario

Document Date and version	2022.06.06
Tested on OLT Huawei MA5683T	Version: MA5600V800R017C10
Tested with ONT HALNy HL-4GMVR	Supported on Version: V3.0.10 or above
Revision	1

Let us know how to improve below document on: support@halny.com

ONT Configuration

1. Triple Play (Internet, IPTV, VoIP)

ONT was connect to the GPON port 1 (slot 0) with ONU_ID 23

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 300 – VOIP
VLAN 400 – MGMT

1. Create DBA profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 136 profile-name "HL-4GMVR"
  ont-port pots 2 eth 4 catv 1
  igmp-forward translation 200
  multicast-forward tag transparent
  port vlan iphost translation 400 user-vlan 400
  commit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 130 profile-name "HL-4GMV"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

4. Register ONT on GPON and configure ip-host 1

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 1 23 sn-auth "48414C4E28468828" omci ont-lineprofile-id 130 ont-srvprofile-id 136 desc "HL-4GMVR"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 23 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)#service-port 123 vlan 100 gpon 0/0/1 ont 23 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 124 vlan 200 gpon 0/0/1 ont 23 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 125 vlan 300 gpon 0/0/1 ont 23 gemport 2 multi-service user-vlan 300 tag-transform translate
MA5683T(config)#service-port 126 vlan 400 gpon 0/0/1 ont 23 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 124 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 124
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

7. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.61.142
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : 54DB-A246-8828
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

2. Triple Play with VLAN Translation (Internet, IPTV, VoIP)

ONT was connect to the GPON port 1 (slot 0) with ONU_ID 24

In example configuration we used below VLANs:
VLAN 100 –> VLAN 31
VLAN 200 –> VLAN 32
VLAN 300 –> VLAN 33
VLAN 400 –> VLAN 34
*Translation supported since firmware version V2.0.19.