How Can We Help?

HL-4G / HL-4G2 SFU Configuration [HUAWEI]

Created On
Last Updated On
byDaniel M
You are here:
< All Topics

HALNy HL-4G Configuration

Service scenario

HL-4G HL-4G2 can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
SFU mode allows to prepare different configurations – such as QiQ tunnel or VLAN translation on the ONT. In this tutorial we will focus on SFU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

ONT configuration

Document Date and version2020.06.03
Tested on OLT Huawei MA5683TVersion: MA5600V800R017C10
Tested with ONT HALNy HL-4G SFUSupported on Version: V2.0.10 or above
Tested with ONT HALNy HL-4G2 SFUSupported on Version: V4.0.4 or above
Revision1
Let us know how to improve below document on: support@halny.com

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 22

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 400 – MGMT 

1. Create DBA profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 139 profile-name "HL-4G_SFU_INT"
  ont-port eth 4
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 2 translation 100 user-vlan 100
  port vlan eth 3 translation 100 user-vlan 100
  port vlan eth 4 translation 100 user-vlan 100
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 139 profile-name "HL-4G_SFU_INT"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 400
  commit
  quit

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 22 sn-auth "48414C4E086046A8" omci ont-lineprofile-id 139 ont-srvprofile-id 139 desc "HL-4G_SFU_INT"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 22 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5683T(config)# interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 22 eth 1 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 22 eth 2 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 22 eth 3 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 22 eth 4 vlan 100 priority 0

6. Create bbs-config

MA5683T(config)#service-port 82 vlan 100 gpon 0/0/0 ont 22 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 83 vlan 400 gpon 0/0/0 ont 22 gemport 1 multi-service user-vlan 400 tag-transform translate

7. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.229
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 185.228.168.10
  ONT MAC                  : E05A-9F6F-B800
  ONT manage VLAN          : 500
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

2.ONT configuration (Access mode, INTERNET+IPTV)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 23

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 400 – MGMT 

1. Create DBA profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 140 profile-name "HL-4G_SFU_INT_IPTV"
  ont-port eth 4
  multicast mode igmp-snooping
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 2 translation 100 user-vlan 100
  port vlan eth 3 translation 200 user-vlan 200
  port vlan eth 4 translation 200 user-vlan 200
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 140 profile-name "HL-4G_SFU_INT_IPTV"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 400
  commit
  quit

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 23 sn-auth "48414C4E086046A8" omci ont-lineprofile-id 140 ont-srvprofile-id 140 desc "HL-4G_SFU_INT_IPTV"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 23 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 23 eth 1 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 23 eth 2 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 23 eth 3 vlan 200 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 23 eth 4 vlan 200 priority 0

6. Create bbs-config

MA5683T(config)#service-port 84 vlan 100 gpon 0/0/0 ont 23 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 85 vlan 200 gpon 0/0/0 ont 23 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 86 vlan 400 gpon 0/0/0 ont 23 gemport 2 multi-service user-vlan 400 tag-transform translate

7. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 85 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 85
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

8. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.229
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 185.228.168.10
  ONT MAC                  : E05A-9F6F-B800
  ONT manage VLAN          : 500
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

3. ONT configuration (TRANSPARENT mode)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 24

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 300 – VoIP
VLAN 400 – MGMT 

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 141 profile-name "HL-4G_SFU_TRANS"
  ont-port eth 4
  igmp-forward translation 200
  multicast-forward tag translation 200
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 1 translation 200 user-vlan 200
  port vlan eth 1 translation 300 user-vlan 300
  port vlan eth 2 translation 100 user-vlan 100
  port vlan eth 2 translation 200 user-vlan 200
  port vlan eth 2 translation 300 user-vlan 300
  port vlan eth 3 translation 100 user-vlan 100
  port vlan eth 3 translation 200 user-vlan 200
  port vlan eth 3 translation 300 user-vlan 300
  port vlan eth 4 translation 100 user-vlan 100
  port vlan eth 4 translation 200 user-vlan 200
  port vlan eth 4 translation 300 user-vlan 300
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 141 profile-name "HL-4G_SFU_TRANS"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

*HL-4G suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 24 sn-auth "48414C4E086046A8" omci ont-lineprofile-id 141 ont-srvprofile-id 141 desc "HL-4G_SFU_TRANS"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 24 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)# service-port 87 vlan 100 gpon 0/0/0 ont 24 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 88 vlan 200 gpon 0/0/0 ont 24 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 89 vlan 300 gpon 0/0/0 ont 24 gemport 2 multi-service user-vlan 300 tag-transform translate
MA5683T(config)#service-port 90 vlan 400 gpon 0/0/0 ont 24 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 88 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 88
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

7. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.229
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 185.228.168.10
  ONT MAC                  : E05A-9F6F-B800
  ONT manage VLAN          : 500
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

4. ONT configuration (Access + TRANSPARENT mode)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 25

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 300 – VoIP
VLAN 400 – MGMT 

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 142 profile-name "HL-4G_SFU_ACCESS_TRANS"
  ont-port eth 4
  igmp-forward translation 200
  multicast-forward tag translation 200
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 2 translation 100 user-vlan 100
  port vlan eth 3 translation 200 user-vlan 200
  port vlan eth 4 translation 100 user-vlan 100
  port vlan eth 4 translation 200 user-vlan 200
  port vlan eth 4 translation 300 user-vlan 300
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 142 profile-name "HL-4G_SFU_ACCESS_TRANS"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

*HL-4G suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 25 sn-auth "48414C4E086046A8" omci ont-lineprofile-id 142 ont-srvprofile-id 142 desc "HL-4G_SFU_ACCESS_TRANS"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 25 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5683T(config)# interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 25 eth 1 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 25 eth 2 vlan 200 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 25 eth 3 vlan 200 priority 0

6. Create bbs-config

MA5683T(config)# service-port 91 vlan 100 gpon 0/0/0 ont 25 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 92 vlan 200 gpon 0/0/0 ont 25 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 93 vlan 300 gpon 0/0/0 ont 25 gemport 2 multi-service user-vlan 300 tag-transform translate
MA5683T(config)#service-port 94 vlan 400 gpon 0/0/0 ont 25 gemport 3 multi-service user-vlan 400 tag-transform translate

7. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 92 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 92
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

8. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.229
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 185.228.168.10
  ONT MAC                  : E05A-9F6F-B800
  ONT manage VLAN          : 500
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

5. ONT configuration (Hybrid mode)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 28

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 400 – MGMT 

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 145 profile-name "HL-4G_SFU_HYBRID"
  ont-port eth 4
  igmp-forward translation 200
  multicast-forward tag translation 200
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 1 translation 200 user-vlan 200
  port vlan eth 2 translation 100 user-vlan 100
  port vlan eth 2 translation 200 user-vlan 200
  port vlan eth 3 translation 100 user-vlan 100
  port vlan eth 3 translation 200 user-vlan 200
  port vlan eth 4 translation 100 user-vlan 100
  port vlan eth 4 translation 200 user-vlan 200
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 145 profile-name "HL-4G_SFU_HYBRID"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 400
  commit
  quit

*HL-4G suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 28 sn-auth "48414C4E086046A8" omci ont-lineprofile-id 145 ont-srvprofile-id 145 desc "HL-4G_SFU_HYBRID"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 28 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 28 eth 1 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 28 eth 2 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 28 eth 3 vlan 100 priority 0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 0 28 eth 4 vlan 100 priority 0

6. Create bbs-config

MA5683T(config)# service-port 102 vlan 100 gpon 0/0/0 ont 28 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 103 vlan 200 gpon 0/0/0 ont 28 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 104 vlan 400 gpon 0/0/0 ont 28 gemport 2 multi-service user-vlan 400 tag-transform translate

7. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 103 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 103
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

8. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.196
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F6F-46A8
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

6. ONT configuration (VLAN translation – rBSA)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 26

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 300 – VoIP
VLAN 400 – MGMT 

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 143 profile-name "HL-4G_SFU_TRANSLATION"
  ont-port eth 4
  igmp-forward translation 200
  multicast-forward tag translation 838
  port vlan eth 1 translation 100 user-vlan 35
  port vlan eth 1 translation 200 user-vlan 838
  port vlan eth 1 translation 300 user-vlan 839
  port vlan eth 2 translation 100 user-vlan 35
  port vlan eth 2 translation 200 user-vlan 838
  port vlan eth 2 translation 300 user-vlan 839
  port vlan eth 3 translation 100 user-vlan 35
  port vlan eth 3 translation 200 user-vlan 838
  port vlan eth 3 translation 300 user-vlan 839
  port vlan eth 4 translation 100 user-vlan 35
  port vlan eth 4 translation 200 user-vlan 838
  port vlan eth 4 translation 300 user-vlan 839
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 143 profile-name "HL-4G_SFU_TRANSLATION"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

*HL-4G suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 26 sn-auth "48414C4E086046A8" omci ont-lineprofile-id 143 ont-srvprofile-id 143 desc "HL-4G_SFU_TRANSLATION"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 26 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)# service-port 95 vlan 100 gpon 0/0/0 ont 26 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 96 vlan 200 gpon 0/0/0 ont 26 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 97 vlan 300 gpon 0/0/0 ont 26 gemport 2 multi-service user-vlan 300 tag-transform translate
MA5683T(config)#service-port 98 vlan 400 gpon 0/0/0 ont 26 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 96 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 96
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

7. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.229
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 185.228.168.10
  ONT MAC                  : E05A-9F6F-B800
  ONT manage VLAN          : 500
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

7. ONT configuration (802.1q in 802.1q Begin/End of Tunnel)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 27

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV
VLAN 300 – VoIP
VLAN 400 – MGMT 
VLAN 999 – SVLAN

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 144 profile-name "HL-4G_SFU_QinQ"
  ont-port eth 4
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 1 translation 200 user-vlan 200
  port vlan eth 1 translation 300 user-vlan 300
  port vlan eth 2 translation 100 user-vlan 100
  port vlan eth 2 translation 200 user-vlan 200
  port vlan eth 2 translation 300 user-vlan 300
  port vlan eth 3 translation 100 user-vlan 100
  port vlan eth 3 translation 200 user-vlan 200
  port vlan eth 3 translation 300 user-vlan 300
  port vlan eth 4 translation 100 user-vlan 100
  port vlan eth 4 translation 200 user-vlan 200
  port vlan eth 4 translation 300 user-vlan 300
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 144 profile-name "HL-4G_SFU_QinQ"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

*HL-4G suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 27 sn-auth "48414C4E086046A8" omci ont-lineprofile-id 144 ont-srvprofile-id 144 desc "HL-4G_SFU_QinQ"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 27 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)# service-port 99 vlan 999 gpon 0/0/0 ont 27 gemport 0 multi-service user-vlan 100 tag-transform default
MA5683T(config)#service-port 100 vlan 999 gpon 0/0/0 ont 27 gemport 1 multi-service user-vlan 200 tag-transform default
MA5683T(config)#service-port 101 vlan 999 gpon 0/0/0 ont 27 gemport 2 multi-service user-vlan 300 tag-transform default
MA5683T(config)#service-port 102 vlan 400 gpon 0/0/0 ont 27 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.196
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F6F-46A8
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

8. ONT configuration (OSE / MdO)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 28

In example configuration we used below VLANs:
VLAN 100 – MGMT VLAN
VLAN 200 –Service Y CVLAN
VLAN 300 – Service Z VLAN
VLAN 400 – MGMT 
VLAN 999 – SVLAN

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 145 profile-name "HL-4G_SFU_OSE"
  ont-port eth 4
  port vlan eth 1 translation 100 user-vlan 10
  port vlan eth 1 translation 200 user-vlan 11
  port vlan eth 1 translation 300 user-vlan 51
  port vlan eth 2 translation 100 user-vlan 10
  port vlan eth 2 translation 200 user-vlan 11
  port vlan eth 2 translation 300 user-vlan 51
  port vlan eth 3 translation 100 user-vlan 10
  port vlan eth 3 translation 200 user-vlan 11
  port vlan eth 3 translation 300 user-vlan 51
  port vlan eth 4 translation 100 user-vlan 10
  port vlan eth 4 translation 200 user-vlan 11
  port vlan eth 4 translation 300 user-vlan 51
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 145 profile-name "HL-4G_SFU_OSE"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

*HL-4G suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 28 sn-auth "48414C4E086046A8" omci ont-lineprofile-id 145 ont-srvprofile-id 145 desc "HL-4G_SFU_OSE"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 28 dhcp vlan 400 priority 0

5.Create bbs-config

MA5683T(config)#service-port 103 vlan 999 gpon 0/0/0 ont 28 gemport 0 multi-service user-vlan 100 tag-transform default
MA5683T(config)#service-port 104 vlan 999 gpon 0/0/0 ont 28 gemport 1 multi-service user-vlan 200 tag-transform default
MA5683T(config)#service-port 105 vlan 999 gpon 0/0/0 ont 28 gemport 2 multi-service user-vlan 300 tag-transform default
MA5683T(config)#service-port 106 vlan 400 gpon 0/0/0 ont 28 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.196
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F6F-46A8
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

ONT HL-4G / HL-4G2 SFU Upgrade on HUAWEI MA5683T

HL-4G / HL-4G2 SFU can be upgraded the same way as other HALNy ONTs, You can find upgrade procedure here.

Table of Contents
Hit enter to search or ESC to close

Search Page

The beauty of this theme is that is built with Modules. Every time you can active or dis-active any module that you would not need anymore ! Awesome WordPress Theme with latest technologies.

May We Suggest?