HALNy HL-1GE SFU Configuration [RAISECOM ISCOM 5508/6800]

ONT configuration

Document Date and version	2024.06.03
Tested on OLT RAISECOM ISCOM 5508	Version: 2.61.SP3.1_20171108
Tested with ONT HALNy HL-1GE	Supported on Version: V2.0.13 or above
Revision	1

Let us know how to improve below document on: support@halny.com

Vendor support change

Connect PC to ONT eth LAN port and navigate to URL http://192.168.33.1/cgi-bin/vendor-support.asp.
From drop-down menu select RAISECOM.
To get more information please check -> https://halny.com/knowledge-base/vendor-support/

SFU mode

Change mode via ONT web interface – You should go to ONT web interface from IP-host 1 address or LAN IP 192.168.33.1.
Next, You should go to Access Management -> Service-mode, select proper mode (SFU) and click “Confirm” button.
After that, ONT will restart, after it turn on, mode will be applied.
To get more information please check -> https://halny.com/knowledge-base/sfu-hgu-how-to-change-mode/

Supported SFU service scenarios

ONT is connected to the port 1/1

1. ONT configuration (Access mode, only INTERNET)

1.Create DBA profile:

create dba-profile 3 name DBA type3 assure 1024 max 1024000

2. Create gpon-onu-line profile

gpon-onu-line-profile 17
create tcont 1 dba-profile 3
create tcont 2 dba-profile 3
create gem 1 tcont 1
commit
gem 1 mapping 1 vlan 100
commit
create gem 2 tcont 2
commit
gem 2 mapping 1 vlan 400
commit

3. Create gpon-onu-service-profile

gpon-onu-service-profile 17
port-num ethernet 1
iphost-num 1
uni ethernet 1 vlan mode tagged
uni ethernet 1 native vlan 100
iphost 1 mode dhcp
iphost 1 native vlan 400
iphost 1 service management
commit

4. Create ONT

create gpon-onu 1 sn RCMG08196630 line-profile-id 17 service-profile-id 17

5. Display ONT ip-host 1 address

GPON(config)#show gpon-onu 1/1/1 iphost
ONU ID: 1/1/1
Iphost ID : 1
Mode : dhcp
IP Type : ipv4
IP Address : 0.0.0.0
Mask : 0.0.0.0
Default-gw : 0.0.0.0
VLAN : 400
Priority : 0
Allowed vlan : n/a
Pri-dns : 0.0.0.0
Sec-dns : 0.0.0.0
Sec-dns : 54db.a219.6630
PPPoe Username :
PPPoe Password :
Current IPAddr : 10.20.30.146
Current Mask : 255.255.255.0
Current-gw : 10.20.30.1
Current Pri-dns : 0.0.0.0
Current Sec-dns : 0.0.0.0
IPv6LinkLocalAddr : ::
IPv6Addr : ::
IPv6DefaultRouter : ::
IPv6PrimaryDNS : ::
IPv6SecondaryDNS : ::
IPv6DUID :

2. ONT configuration (Access mode, Internet, IPTV)

1.Create DBA profile:

create dba-profile 3 name DBA type3 assure 1024 max 1024000

2. Create gpon-onu-line profile

gpon-onu-line-profile 18
create tcont 1 dba-profile 3
create tcont 2 dba-profile 3
create gem 1 tcont 1
commit
gem 1 mapping 1 vlan 200
commit
create gem 2 tcont 2
commit
gem 2 mapping 1 vlan 400
commit

3. Create gpon-onu-service-profile

gpon-onu-service-profile 18
port-num ethernet 1
iphost-num 1
uni ethernet 1 vlan mode tagged
uni ethernet 1 native vlan 200
uni ethernet 1 immediate-leave enable
iphost 1 mode dhcp
iphost 1 native vlan 400
iphost 1 service management
commit

4. Create ONT

create gpon-onu 1 sn RCMG08196630 line-profile-id 18 service-profile-id 18

5. Display ONT ip-host 1 address

GPON(config)#show gpon-onu 1/1/1 iphost
ONU ID: 1/1/1
Iphost ID : 1
Mode : dhcp
IP Type : ipv4
IP Address : 0.0.0.0
Mask : 0.0.0.0
Default-gw : 0.0.0.0
VLAN : 400
Priority : 0
Allowed vlan : n/a
Pri-dns : 0.0.0.0
Sec-dns : 0.0.0.0
Sec-dns : 54db.a219.6630
PPPoe Username :
PPPoe Password :
Current IPAddr : 10.20.30.146
Current Mask : 255.255.255.0
Current-gw : 10.20.30.1
Current Pri-dns : 0.0.0.0
Current Sec-dns : 0.0.0.0
IPv6LinkLocalAddr : ::
IPv6Addr : ::
IPv6DefaultRouter : ::
IPv6PrimaryDNS : ::
IPv6SecondaryDNS : ::
IPv6DUID :

3. ONT configuration (TRANSPARENT mode)

1.Create DBA profile:

create dba-profile 3 name DBA type3 assure 1024 max 1024000

2. Create gpon-onu-line profile

gpon-onu-line-profile 19
create tcont 1 dba-profile 3
create tcont 2 dba-profile 3
create tcont 3 dba-profile 3
create tcont 4 dba-profile 3
create gem 1 tcont 1
commit
gem 1 mapping 1 vlan 100
commit
create gem 2 tcont 2
commit
gem 2 mapping 1 vlan 200
commit
create gem 3 tcont 3
commit
gem 3 mapping 1 vlan 300
commit
create gem 4 tcont 4
commit
gem 4 mapping 1 vlan 400
commit

3. Create gpon-onu-service-profile

gpon-onu-service-profile 19
port-num ethernet 1
iphost-num 1
uni ethernet 1 vlan mode trunk
uni ethernet 1 vlan trunk allowed 100,200,300
iphost 1 mode dhcp
iphost 1 native vlan 400
iphost 1 service management
commit
quit

4. Create ONT

create gpon-onu 1 sn RCMG08196630 line-profile-id 19 service-profile-id 19

5. Display ONT ip-host 1 address

GPON(config)#show gpon-onu 1/1/1 iphost
ONU ID: 1/1/1
Iphost ID : 1
Mode : dhcp
IP Type : ipv4
IP Address : 0.0.0.0
Mask : 0.0.0.0
Default-gw : 0.0.0.0
VLAN : 400
Priority : 0
Allowed vlan : n/a
Pri-dns : 0.0.0.0
Sec-dns : 0.0.0.0
Sec-dns : 54db.a219.6630
PPPoe Username :
PPPoe Password :
Current IPAddr : 10.20.30.146
Current Mask : 255.255.255.0
Current-gw : 10.20.30.1
Current Pri-dns : 0.0.0.0
Current Sec-dns : 0.0.0.0
IPv6LinkLocalAddr : ::
IPv6Addr : ::
IPv6DefaultRouter : ::
IPv6PrimaryDNS : ::
IPv6SecondaryDNS : ::
IPv6DUID :

---