HALNy HL-1GE HGU Configuration [HUAWEI]

You are here:
< All Topics

HALNy HL-1GE Configuration

Service Scenario

HL-1GE can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
SFU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In example, if ONT has to be working as HGU, we need to set only VEIP. If as SFU, we need to set bridge port(s) and VEIP(only if we want to use ip-host).
SFU mode allows to prepare more complex configuration – such as QiQ tunnel or VLAN translation on the ONT. In this tutorial we will focus on HGU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

Document Date and version2020.05.18
Tested on OLT Huawei MA5683TVersion: MA5600V800R017C10
Tested with ONT HALNy HL-1GESupported on Version: V2.0.10 or above
Revision1
Let us know how to improve below document on: support@halny.com

Supported service scenarios

1.ONT configuration (Access mode, only INTERNET)

ONT was connect to GPON port 1 (slot 0) with ONU_ID 14

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 400 – MGMT 

1. Create DBA profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 139 profile-name "HL-1GE_HGU_INT"
  ont-port eth 1
  port vlan iphost translation 400 user-vlan 400
  commit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 139 profile-name "HL-1GE_HGU_INT"
   fec-upstream enable
   tcont 1 dba-profile-id 17
   tcont 2 dba-profile-id 17
   gem add 0 eth tcont 1
   gem add 1 eth tcont 2
   gem mapping 0 0 vlan 100
   gem mapping 1 1 vlan 400
   commit
   quit

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 1 14 sn-auth "48414C4E086046A8" omci ont-lineprofile-id 131 ont-srvprofile-id 131 desc "HL-1GE_HGU_INT"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 14 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)#service-port 81 vlan 100 gpon 0/0/1 ont 14 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 82 vlan 400 gpon 0/0/1 ont 14 gemport 1 multi-service user-vlan 400 tag-transform translate

6. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.196
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F6F-46A8
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

2.ONT configuration (Access mode, only IPTV)

ONT was connect to the GPON port 1 (slot 0) with ONU_ID 15

In example configuration we used below VLANs:
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 400 – MGMT 

1. Create DBA profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 140 profile-name "HL-1GE_SFU-IPTV"
  ont-port pots 0 eth 1
  igmp-forward translation 200
  multicast-forward tag transparent
  port vlan iphost translation 400 user-vlan 400
  commit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 140 profile-name "HL-1GE_SFU-IPTV"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem mapping 0 0 vlan 200
  gem mapping 1 1 vlan 400
  commit
  quit

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)ont add 1 15 sn-auth "48414C4E086046A8" omci ont-lineprofile-id 132 ont-srvprofile-id 132 desc "HL-1GE_SFU-IPTV"
MA5683T(config-if-gpon-0/0)ont ipconfig 1 15 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)#service-port 83 vlan 200 gpon 0/0/1 ont 15 gemport 0 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 84 vlan 400 gpon 0/0/1 ont 15 gemport 1 multi-service user-vlan 400 tag-transform translate

6. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 84 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 84
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

7. Verify ONT ip-host IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.196
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F6F-46A8
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

ONT HL-1GE HGU Provisioning on HUAWEI MA5683T

There are two ways of ONT provisioning:

  • DHCP option 66,67 (link)
  • Upgrade ONT with tar.gz file where XML file is included – OMCI Firmware Upgrade provisioning (link)
  • TR-069(link)

ONT HL-1GE HGU Upgrade on HUAWEI MA5683T

HL-1GE can be upgrade the same way as other HALNy ONTs, You can find upgrade procedure here.


Table of Contents