[ZTE] C6XX Series OLT Integration with HALNy SFU 2 LAN

Created On23 June 2025

Last Updated On23 June 2025

byAdrian Puk

HALNy Integration

Service scenario

HALNy ONT’s can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
SFU mode allows to prepare different configurations – such as QinQ tunnel or VLAN translation on the ONT. In this tutorial we will focus on SFU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

Let us know how to improve below document on: support@halny.com

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

This tutorial is based on ONT with firmware V4.0.8p1 and ZTE C610 running with firmware V1.2.2.

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 400 – MGMT

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

2. Create ONT Type
Attention: Following configuration example is based on the HL-2BV model, which features 2 LAN ports and 1 POTS port. Adjust the configuration as needed to suit your ONT model.
Change HL-MODEL string to exact model name of the ONT.

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1
  onu-type-if HL-MODEL eth_0/2
  onu-type-if HL-MODEL pots_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 9 type HL-MODEL sn HALN5A6FA578

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

(config)# interface gpon-onu_1/3/3:9 
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport-map 1 1 vlan 100
  vport-map 2 2 vlan 400

5. Create vlan-profile (for IP host 1)

onu profile vlan tag400 tag-mode tag cvlan 400

6. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:9
  service 1 gemport 1 vlan 100
  service 2 gemport 2 vlan 400
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
  vlan port eth_0/1 mode hybrid def-vlan 100
  vlan port eth_0/2 mode hybrid def-vlan 100

7. Configure vports.

interface vport-1/3/3.9:1
  service-port 1 user-vlan 100 vlan 100
$
interface vport-1/3/3.9:2
  service-port 3 user-vlan 400 vlan 400

8. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:9
Host ID:            1
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.5A6F.A578
Current IP address: 172.17.60.136
Current mask:       255.255.254.0
Current gateway:    172.17.60.1
Current primary DNS:172.17.61.224
Current second DNS: 172.17.60.1
Domain name:

2. ONT configuration (Access mode, INTERNET + IPTV)

This tutorial is based on ONT with firmware V4.0.8p1 and ZTE C610 running with firmware V1.2.2.

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV
VLAN 400 – MGMT

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1
  onu-type-if HL-MODEL eth_0/2
  onu-type-if HL-MODEL pots_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 9 type HL-MODEL sn HALN5A6FA578

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

(config)# interface gpon-onu_1/3/3:9 
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  tcont 3 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  gemport 3 tcont 3
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport 3 map-type vlan
  vport-map 1 1 vlan 100
  vport-map 2 2 vlan 200
  vport-map 3 3 vlan 400

5. Create igmp profile

(config-gpon)#onu profile igmp 200 down-tag strip

6. Create vlan-profile (for IP host 1)

(config-gpon)#onu profile vlan tag400 tag-mode tag cvlan 400

7. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:9
  mvlan 200
  service 1 gemport 1 vlan 100
  service 2 gemport 2 vlan 200
  service 3 gemport 3 vlan 400
  igmp eth_0/1 profile 200
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
  vlan port eth_0/1 mode hybrid def-vlan 200
  vlan port eth_0/2 mode hybrid def-vlan 100

8. Configure vports.

(config)#interface vport-1/3/3.9:1
  service-port 1 user-vlan 100 vlan 100
$
(config)#interface vport-1/3/3.9:2
  service-port 2 user-vlan 200 vlan 200
  igmp fast-leave enable
  igmp version v2
$
(config)#interface vport-1/3/3.9:3
  service-port 3 user-vlan 400 vlan 400

9. Configure IGMP Snooping

(config)# igmp querygemport-mode both
(config)# igmp  mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.9:2
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping

10. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:9
Host ID:            1
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.5A6F.A578
Current IP address: 172.17.60.136
Current mask:       255.255.254.0
Current gateway:    172.17.60.1
Current primary DNS:172.17.61.224
Current second DNS: 172.17.60.1
Domain name:

3. ONT configuration (Access mode, INTERNET + IPTV + VoIP)

This tutorial is based on ONT with firmware V4.0.8p1 and ZTE C610 running with firmware V1.2.2.

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV
VLAN 400 – VoIP / MGMT

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1
  onu-type-if HL-MODEL eth_0/2
  onu-type-if HL-MODEL pots_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 9 type HL-MODEL sn HALN5A6FA578

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

(config)# interface gpon-onu_1/3/3:9 
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  tcont 3 profile MAX
  tcont 3 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  gemport 3 tcont 3
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport 3 map-type vlan
  vport-map 1 1 vlan 100
  vport-map 2 2 vlan 200
  vport-map 3 3 vlan 400

5. Create igmp profile

(config-gpon)#onu profile igmp 200 down-tag strip

6. Create vlan-profile (for IP host 1 and VoIP)

(config-gpon)#onu profile vlan tag400 tag-mode tag cvlan 400

7. Create SIP profile

(config-gpon)#onu profile sip HALNY_VOIP proxy 172.1.1.2
(config-gpon)#onu profile sip HALNY_VOIP registrar 172.1.1.2

8. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:9
  mvlan 200
  service 1 gemport 1 vlan 100
  service 2 gemport 2 vlan 200
  service 3 gemport 3 vlan 400
  igmp eth_0/1 profile 200
  vlan port eth_0/1 mode hybrid def-vlan 200
  vlan port eth_0/2 mode hybrid def-vlan 100
  voip protocol sip
  voip-ip ipv4 mode dhcp vlan-profile tag400 host 1
  sip-service pots_0/1 profile HALNY_VOIP userid 9000 username 9000 password 123456 display-name 9000

9. Configure vports.

(config)#interface vport-1/3/3.9:1
  service-port 1 user-vlan 100 vlan 100
$
(config)#interface vport-1/3/3.9:2
  service-port 2 user-vlan 200 vlan 200
  igmp fast-leave enable
  igmp version v2
$
(config)#interface vport-1/3/3.9:3
  service-port 3 user-vlan 400 vlan 400

10. Configure IGMP Snooping

(config)# igmp querygemport-mode both
(config)# igmp  mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.9:2
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping

11. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:9
Host ID:            1
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.5A6F.A578
Current IP address: 172.17.60.136
Current mask:       255.255.254.0
Current gateway:    172.17.60.1
Current primary DNS:172.17.61.224
Current second DNS: 172.17.60.1
Domain name:

4. ONT configuration (Transparent mode)

This tutorial is based on ONT with firmware V4.0.8p1 and ZTE C610 running with firmware V1.2.2.

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV
VLAN 300 – VoIP
VLAN 400 – MGMT

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1
  onu-type-if HL-MODEL eth_0/2
  onu-type-if HL-MODEL pots_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 9 type HL-MODEL sn HALN5A6FA578

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

(config)# interface gpon-onu_1/3/3:9 
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  tcont 3 profile MAX
  tcont 4 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  gemport 3 tcont 3
  gemport 4 tcont 4
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport 3 map-type vlan
  vport 4 map-type vlan
  vport-map 1 1 vlan 100
  vport-map 2 2 vlan 200
  vport-map 3 3 vlan 300
  vport-map 4 4 vlan 400

5. Create igmp profile

(config-gpon)#onu profile igmp 200T down-tag transparent tag transparent

6. Create vlan-profile (for IP host 1)

(config-gpon)#onu profile vlan tag400 tag-mode tag cvlan 400

7. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:9
  mvlan 200
  service 1 gemport 1 vlan 100
  service 2 gemport 2 vlan 200
  service 3 gemport 3 vlan 300
  service 4 gemport 4 vlan 400
  igmp eth_0/1 profile 200T
  igmp eth_0/2 profile 200T
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
  vlan port eth_0/1 mode trunk
  vlan port eth_0/2 mode trunk
  vlan port eth_0/1 vlan 100,200,300
  vlan port eth_0/2 vlan 100,200,300

8. Configure vports.

(config)# interface vport-1/3/3.9:1
  service-port 1 user-vlan 100 vlan 100
$
(config)# interface vport-1/3/3.9:2
  service-port 2 user-vlan 200 vlan 200
  igmp fast-leave enable
  igmp version v2
$
(config)# interface vport-1/3/3.9:3
  service-port 3 user-vlan 300 vlan 300
$
(config)# interface vport-1/3/3.9:4
  service-port 4 user-vlan 400 vlan 400

9. Configure IGMP Snooping

(config)# igmp querygemport-mode both
(config)# igmp  mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.9:2
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping

10. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:9
Host ID:            1
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.5A6F.A578
Current IP address: 172.17.60.136
Current mask:       255.255.254.0
Current gateway:    172.17.60.1
Current primary DNS:172.17.61.224
Current second DNS: 172.17.60.1
Domain name:

5. ONT configuration (Translation mode)

This tutorial is based on ONT with firmware V4.0.8p1 and ZTE C610 running with firmware V1.2.2.

In example configuration we used below VLANs:
VLAN 100 -> 35 – INTERNET
VLAN 200 -> 838 – IPTV
VLAN 300 -> 839 – VoIP
VLAN 400 – MGMT

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

(config)# pon
  onu-type HL-MODEL gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-MODEL eth_0/1
  onu-type-if HL-MODEL eth_0/2
  onu-type-if HL-MODEL pots_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 9 type HL-MODEL sn HALN5A6FA578

4. Configure ONT interface mode

Attention: For ONT’s which have port 10G please use DBA_10G

(config)# interface gpon-onu_1/3/3:9 
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  tcont 3 profile MAX
  tcont 4 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  gemport 3 tcont 3
  gemport 4 tcont 4
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport 3 map-type vlan
  vport 4 map-type vlan
  vport-map 1 1 vlan 35
  vport-map 2 2 vlan 838
  vport-map 3 3 vlan 839
  vport-map 4 4 vlan 400

5. Create vlan-profile (for IP host 1)

(config-gpon)#onu profile vlan tag400 tag-mode tag cvlan 400

6. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:9
  mvlan 838
  service 1 gemport 1 vlan 35
  service 2 gemport 2 vlan 838
  service 3 gemport 3 vlan 839
  service 4 gemport 4 vlan 400
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
  vlan port eth_0/1 mode trunk
  vlan port eth_0/2 mode trunk
  vlan port eth_0/1 vlan 35,838,839
  vlan port eth_0/2 vlan 35,838,839

7. Configure vports.

(config)# interface vport-1/3/3.9:1
  service-port 1 user-vlan 35 vlan 100
$
(config)# interface vport-1/3/3.9:2
  service-port 2 user-vlan 838 vlan 200
  igmp fast-leave enable
  igmp version v2
$
(config)# interface vport-1/3/3.9:3
  service-port 3 user-vlan 839 vlan 300
$
(config)# interface vport-1/3/3.9:4
  service-port 4 user-vlan 400 vlan 400

8. Configure IGMP Snooping

(config)# igmp querygemport-mode both
(config)# igmp  mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.9:2
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping

9. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:9
Host ID:            1
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.5A6F.A578
Current IP address: 172.17.60.136
Current mask:       255.255.254.0
Current gateway:    172.17.60.1
Current primary DNS:172.17.61.224
Current second DNS: 172.17.60.1
Domain name:

ONT Upgrade on ZTE C610

Upgrade procedure for HALNy ONTs (link)

Tags:


GPON ONTs
Model	LAN ports	VoIP FXS POTS port	RF/CATV overlay
HL-GSFP	1 x SFP 1GbE/2.5GbE	-	-
HL-1G	1×10/100/1000	-	-
HL-1GE	1×10/100/1000	-	-
HL-1GE2	1×10/100/1000	-	-
HL-1GC	1×10/100/1000	-	-
HL-1GR	1×10/100/1000	-	1
HL-1B	1×100/1000/2500	-
HL-2GRV	2×10/100/1000	1	1
HL-2BV	1×1000/2500 1×10/100/1000	1	-
HL-4G	4×10/100/1000	-	-
HL-4G2	4×10/100/1000	-	-
HL-4GV	4×10/100/1000	1	-
HL-4GMV	4×10/100/1000	2	-
HL-4GMV2	4×10/100/1000	2	-
HL-4GMV3	4×10/100/1000	1	-
HL-4GMV4	4×10/100/1000	1	-
HL-4GMVR	4×10/100/1000	1	1
HL-4GQV	4×10/100/1000	2	-
HL-4GQVS	4×10/100/1000	1	-
HL-4GQVS2	4×10/100/1000	1	-
HL-4GXV	4×10/100/1000	1	-
HL-4GXV-F	4×10/100/1000	1	-
HL-4GXVU-F	4×10/100/1000	1	-
HL-4BX3V-F	3×10/100/1000 1×2500	1	-
HL-4GX3VR	4×10/100/1000	-	1
XGSPON ONTs
HLX-SFPX	1x SFP+ 1GbE/2.5GbE/10GbE	-	-
HLX-1TL	1×1000/2500/10000	-	-
HLX-1TLV	1×1000/2500/10000	1	-
HLX-TGV	1×1000/2500/5000/10000 1×10/100/1000	2	-


Model	WAN ports	LAN ports	WiFi	WiFi speed	Antennas	VoIP	Sales Status
Ethernet Routers
HLE-3GX-F	1×10/100/1000	3×10/100/1000	2T2R WiFi6	1800AX	Internal	-	In daily sales
HLE-4BX3V-F	1×100/1000/2500 Ethernet	3×10/100/1000 + 1×2500	2T2R WiFi6	WiFi6 AX3000	Internal	1xFXS	Coming soon!
Active Ethernet (SFP WAN)
HLS-4BX3V-F	1×1000/2500 SFP port	3×10/100/1000 + 1×2500	2T2R WiFi6	WiFi6 AX3000	Internal	1xFXS	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	-	In daily sales


Model Name	Mode	LAN	VoIP	WiFi	Mode button	Sales Status
HLX-SFPX	SFU (Bridge only)	1x1000/10000	-	-	-	New one! In daily sales
HLX-1TL	SFU (Bridge only)	1x1000/2500/10000	-	-	-	Coming soon! Q1-25
HLX-1TLV	SFU (Bridge only)	1x1000/2500/10000	1	-	-	New one! In daily sales
HLX-TGV	SFU (bridge) HGU (router NAT)	1x1000/2500/10000 1x10/100/1000	2	-	-	In daily sales
HLX-4BYV-F	HGU (router NAT)	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Triband 2.4/5/6GHz	Yes	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	In daily sales


Model	LAN ports	VoIP FXS POTS port	WiFi	WiFi antennas grain and type	WiFi speed	RF/CATV overlay	EtherWAN (LAN4 as Wan port)	USB port	SALES STATUS
HL-GSFP	SFP 1GbE/2.5GbE	-	-	-	-	-	-	-	In daily sales
HL-1GE	1×10/100/1000	-	-	-	-	-	-	-	In daily sales
HL-1GC	1×10/100/1000	-	-	-	-	-	-	-	In daily sales
HL-1B	1×100/1000/2500	-	-	-	-	-	-	-	New one! In daily sales
HL-4G2	4×10/100/1000	-	-	-	-	-	-	-	New one! In daily sales
HL-1GR	1×10/100/1000	-	-	-	-	1	-	-	In daily sales
HL-2BV	1×1000/2500 1×10/100/1000	1	-	-	-	-	-	-	In daily sales
HL-4GV	4×10/100/1000	2	-	-	-	-	-	-	New one! In daily sales
HL-4GMV2	4×10/100/1000	2	2T2R 802.11n 2T2R 802.11ac wave2	2x5dB (external)	866Mbps 5Ghz 300Mbps 2.4Ghz	-	YES	-	In daily sales
HL-4GMVR	4×10/100/1000	1	2T2R 802.11n 2T2R 802.11ac wave2	4x5dB (external)	866Mbps 5Ghz 300Mbps 2.4Ghz	1	YES	-	In daily sales
HL-4GX3VR	4×10/100/1000	1	2T2R AX3000 WiFi6	4x5dB (external)	3000Mbps for 2.4Ghz / 5Ghz	1	YES	-	New one! In daily sales
HL-4GXV-F	4×10/100/1000	1	802.11ax 1800AX WiFi6	2x2 internal	1800Mbs for 2.4Ghz / 5Ghz	-	YES	-	In daily sales
HL-4GXVU-F	4×10/100/1000	1	802.11ax 1800AX WiFi6	2x2 internal	1800Mbs for 2.4Ghz / 5Ghz	-	YES	1	New one! In daily sales
HL-4BX3V-F	3×10/100/1000 1×2500	1	2T3R AX3000 WiFi6	2x3 Internal	3000Mbs for 2.4Ghz / 5Ghz	-	YES	-	New one! In daily sales
HL-4BY3V-F	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Dual-Band 2.4Ghz/5Ghz	Internal	BE3600	-	YES	-	Coming soon!
HL-4BY7V-F	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Dual-Band 2.4Ghz/5Ghz 4x4	Internal	BE7200	-	YES	-	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	-	-	-	In daily sales

Have a Question?

[ZTE] C6XX Series OLT Integration with HALNy SFU 2 LAN

Service scenario

ONT modes switching HGU<->SFU

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

2. ONT configuration (Access mode, INTERNET + IPTV)

3. ONT configuration (Access mode, INTERNET + IPTV + VoIP)

4. ONT configuration (Transparent mode)

5. ONT configuration (Translation mode)

ONT Upgrade on ZTE C610