Have a Question?
HLX-TGV SFU Configuration [ZTE C6XX]

HALNy HLX-TGV Configuration
Service scenario
HLX-TGV can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not instruction for physical eth ports in pon-onu-mng. For SFU mode, such instruction need to be added.
SFU mode allows to prepare more complex configuration – such as VLAN translation on the ONT.
In this tutorial we will focus on SFU mode configuration.
Document Date and version | 2025.06.09 |
Tested on OLT ZTE C620 | Version: V1.2.3 |
Tested with ONT HALNy HLX-TGV | Supported on Version: V6.0.6 or above |
Revision | 1 |
Let us know how to improve below document on: support@halny.com |
Supported SFU service scenarios
1. ONT configuration (Access mode, only INTERNET)

This tutorial is based on ONT with firmware V6.0.6 and ZTE C620 running with firmware V1.2.3.
In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 400 – MGMT
1. Create DBA profile
(config)# gpon
profile tcont DBA type 4 maximum 102400
profile tcont DBA_10G type 4 maximum 1024000
2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex. onu-type HL-4GMV gpon …
(config)# pon
onu-type HLX-TGV gpon max-tcont 4 max-gemport 32 max-iphost 4
onu-type-if HLX-TGV eth_0/1
onu-type-if HLX-TGV eth_0/2
onu-type-if HLX-TGV pots_0/1
onu-type-if HLX-TGV pots_0/2
3. Register ONT on GPON
(config)# interface gpon-olt_1/3/3
onu 7 type HLX-TGV sn HALN922D9D58
4. Configure ONT interface mode
(config)# interface gpon-onu_1/3/3:7
real-speed gpon
vport-mode manual
tcont 1 profile DBA_10G
tcont 2 profile DBA
gemport 1 tcont 1
gemport 2 tcont 2
vport 1 map-type vlan
vport 2 map-type vlan
vport-map 1 1 vlan 100
vport-map 2 2 vlan 400
5. Create vlan-profile (for IP host 1)
onu profile vlan tag400 tag-mode tag cvlan 400
6. Configure ONT remote management mode
(config)# pon-onu-mng gpon-onu_1/3/3:7
service 1 gemport 1 vlan 100
service 2 gemport 2 vlan 400
wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
vlan port eth_0/1 mode hybrid def-vlan 100
vlan port eth_0/2 mode hybrid def-vlan 100
7. Configure vports.
interface vport-1/3/3.7:1
service-port 1 user-vlan 100 vlan 100
$
interface vport-1/3/3.7:2
service-port 2 user-vlan 400 vlan 400
8. Verify ONT ip-host 1 IP address
#show gpon remote-onu ip-host gpon-onu_1/3/3:7
Host ID: 7
Host name: IPHOST: WWW/XML/TR069
Identify:
IP addres: 0.0.0.0
Mask: 0.0.0.0
Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Second DNS: 0.0.0.0
DHCP enable: disable
Ping response: disable
Traceroute response:disable
MAC address: 54DB.A22D.9D59
Current IP address: 172.17.14.156
Current mask: 255.255.255.0
Current gateway: 172.17.14.1
Current primary DNS:8.8.8.8
Current second DNS: 8.8.4.4
Domain name:
2. ONT configuration (Access mode, INTERNET+IPTV)

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 1/1/6)
VLAN 400 – MGMT
1. Create DBA profile
(config)# gpon
profile tcont DBA type 4 maximum 102400
profile tcont DBA_10G type 4 maximum 1024000
2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex. onu-type HL-4GMV gpon …
(config)# pon
onu-type HLX-TGV gpon max-tcont 4 max-gemport 32 max-iphost 4
onu-type-if HLX-TGV eth_0/1
onu-type-if HLX-TGV eth_0/2
onu-type-if HLX-TGV pots_0/1
onu-type-if HLX-TGV pots_0/2
3. Register ONT on GPON
(config)# interface gpon-olt_1/3/3
onu 7 type HLX-TGV sn HALN922D9D58
4. Configure ONT interface mode
(config)# interface gpon-onu_1/3/3:7
real-speed gpon
vport-mode manual
tcont 1 profile DBA_10G
tcont 2 profile DBA_10G
tcont 3 profile DBA
gemport 1 tcont 1
gemport 2 tcont 2
gemport 3 tcont 3
vport 1 map-type vlan
vport 2 map-type vlan
vport 3 map-type vlan
vport-map 1 1 vlan 100
vport-map 2 2 vlan 200
vport-map 3 3 vlan 400
5. Create igmp profile
onu profile igmp 200 down-tag strip
6. Create vlan-profile (for IP host 1)
onu profile vlan tag400 tag-mode tag cvlan 400
7. Configure ONT remote management mode
(config)# pon-onu-mng gpon-onu_1/3/3:7
mvlan 200
service 1 gemport 1 vlan 100
service 2 gemport 2 vlan 200
service 3 gemport 4 vlan 400
igmp eth_0/2 profile 200
wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
vlan port eth_0/1 mode hybrid def-vlan 100
vlan port eth_0/2 mode hybrid def-vlan 200
8. Configure vports.
interface vport-1/3/3.7:1
service-port 1 user-vlan 100 vlan 100
$
interface vport-1/3/3.7:2
service-port 2 user-vlan 200 vlan 200
igmp fast-leave enable
igmp version v2
$
interface vport-1/3/3.7:3
service-port 3 user-vlan 400 vlan 400
9. Configure IGMP Snooping
(config)# igmp querygemport-mode both
(config)# igmp mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.7:2
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping
10. Verify ONT ip-host 1 IP address
#show gpon remote-onu ip-host gpon-onu_1/3/3:7
Host ID: 7
Host name: IPHOST: WWW/XML/TR069
Identify:
IP addres: 0.0.0.0
Mask: 0.0.0.0
Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Second DNS: 0.0.0.0
DHCP enable: disable
Ping response: disable
Traceroute response:disable
MAC address: 54DB.A22D.9D59
Current IP address: 172.17.14.156
Current mask: 255.255.255.0
Current gateway: 172.17.14.1
Current primary DNS:8.8.8.8
Current second DNS: 8.8.4.4
Domain name:
3. ONT configuration (TRANSPARENT mode)

1. Create DBA profile
(config)# gpon
profile tcont DBA type 4 maximum 102400
profile tcont DBA_10G type 4 maximum 1024000
2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex. onu-type HL-4GMV gpon …
(config)# pon
onu-type HLX-TGV gpon max-tcont 4 max-gemport 32 max-iphost 4
onu-type-if HLX-TGV eth_0/1
onu-type-if HLX-TGV eth_0/2
onu-type-if HLX-TGV pots_0/1
onu-type-if HLX-TGV pots_0/2
3. Register ONT on GPON
(config)# interface gpon-olt_1/3/3
onu 7 type HLX-TGV sn HALN922D9D58
4. Configure ONT interface mode
(config)# interface gpon-onu_1/3/3:7
real-speed gpon
vport-mode manual
tcont 1 profile DBA_10G
tcont 2 profile DBA_10G
tcont 3 profile DBA
tcont 4 profile DBA
gemport 1 tcont 1
gemport 2 tcont 2
gemport 3 tcont 3
gemport 4 tcont 4
vport 1 map-type vlan
vport 2 map-type vlan
vport 3 map-type vlan
vport 4 map-type vlan
vport-map 1 1 vlan 100
vport-map 2 2 vlan 200
vport-map 3 3 vlan 300
vport-map 4 4 vlan 400
5. Create igmp profile
onu profile igmp 200 down-tag strip
6. Create vlan-profile (for IP host 1)
onu profile vlan tag400 tag-mode tag cvlan 400
7. Configure ONT remote management mode
(config)# pon-onu-mng gpon-onu_1/3/3:7
mvlan 200
service 1 gemport 1 vlan 100
service 2 gemport 2 vlan 200
service 3 gemport 3 vlan 300
service 4 gemport 4 vlan 400
igmp eth_0/2 profile 200
wan-ip ipv4 mode dhcp vlan-profile tag400 host 1
vlan port eth_0/1 mode trunk
vlan port eth_0/1 vlan 100,200,300
vlan port eth_0/2 mode trunk
vlan port eth_0/2 vlan 100,200,300
8. Configure vports.
interface vport-1/3/3.7:1
service-port 1 user-vlan 100 vlan 100
$
interface vport-1/3/3.7:2
service-port 2 user-vlan 200 vlan 200
igmp fast-leave enable
igmp version v2
$
interface vport-1/3/3.7:3
service-port 3 user-vlan 300 vlan 300
$
interface vport-1/3/3.7:4
service-port 4 user-vlan 400 vlan 400
9. Configure IGMP Snooping
(config)# igmp querygemport-mode both
(config)# igmp mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.7:2
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping
10. Verify ONT ip-host 1 IP address
#show gpon remote-onu ip-host gpon-onu_1/3/3:7
Host ID: 7
Host name: IPHOST: WWW/XML/TR069
Identify:
IP addres: 0.0.0.0
Mask: 0.0.0.0
Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Second DNS: 0.0.0.0
DHCP enable: disable
Ping response: disable
Traceroute response:disable
MAC address: 54DB.A22D.9D59
Current IP address: 172.17.14.156
Current mask: 255.255.255.0
Current gateway: 172.17.14.1
Current primary DNS:8.8.8.8
Current second DNS: 8.8.4.4
Domain name:
ONT HLX-TGV Upgrade on ZTE C620
Upgrade procedure is the same as for other HALNy ONTs (link)
