HLX-TGV HGU Configuration [ZTE C6XX]

HALNy HLX-TGV Configuration

Service scenario

HLX-TGV can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
SFU mode configuration is presented here.
Managing ONT mode is done by setting up/or not instruction for physical eth ports in pon-onu-mng. For HGU mode, we did not set such instruction.
SFU mode allows to prepare more complex configuration – such as VLAN translation on the ONT.
In this tutorial we will focus on HGU mode configuration.

ONT configuration

This tutorial is based on ONT with firmware V6.0.6 and ZTE C620 running with firmware V1.2.3.

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 1/1/6)
VLAN 300 – VOIP
VLAN 400 – MGMT 

1. Create DBA profile

(config)# gpon
  profile tcont DBA type 4 maximum 102400
  profile tcont DBA_10G type 4 maximum 1024000

2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex. onu-type HL-4GMV gpon …

(config)# pon
  onu-type HLX-TGV gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HLX-TGV eth_0/1
  onu-type-if HLX-TGV eth_0/2
  onu-type-if HLX-TGV pots_0/1
  onu-type-if HLX-TGV pots_0/2

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 7 type HLX-TGV sn HALN922D9D58

4. Configure ONT interface mode

(config)# interface gpon-onu_1/3/3:7 
  real-speed gpon
  vport-mode manual
  tcont 1 profile DBA_10G
  tcont 2 profile DBA_10G
  tcont 3 profile DBA
  tcont 4 profile DBA
  gemport 1 tcont 1
  gemport 2 tcont 2
  gemport 3 tcont 3
  gemport 4 tcont 4
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport 3 map-type vlan
  vport 4 map-type vlan
  vport-map 1 1 vlan 100
  vport-map 2 2 vlan 200
  vport-map 3 3 vlan 300
  vport-map 4 4 vlan 400

5. Create igmp profile

onu profile igmp 200 down-tag strip

6. Create vlan-profile (for IP host 1)

onu profile vlan tag400 tag-mode tag cvlan 400

7. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:7
  mvlan 200
  service 1 gemport 1 vlan 100
  service 2 gemport 2 vlan 200
  service 3 gemport 3 vlan 300
  service 4 gemport 4 vlan 400
  igmp eth_0/2 profile 200
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1

8. Configure vports.

interface vport-1/3/3.7:1
  service-port 1 user-vlan 100 vlan 100
$
interface vport-1/3/3.7:2
  service-port 2 user-vlan 200 vlan 200
  igmp fast-leave enable
  igmp version v2
$
interface vport-1/3/3.7:3
  service-port 3 user-vlan 300 vlan 300
$
interface vport-1/3/3.7:4
  service-port 4 user-vlan 400 vlan 400

9. Configure IGMP Snooping

(config)# igmp querygemport-mode both
(config)# igmp  mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port vport-1/3/3.7:2
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping

10. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:7
Host ID:            7
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.A22D.9D59
Current IP address: 172.17.14.156
Current mask:       255.255.255.0
Current gateway:    172.17.14.1
Current primary DNS:8.8.8.8
Current second DNS: 8.8.4.4
Domain name:

ONT HLX-TGV Provisioning on ZTE C620

There are two ways of ONT provisioning:

• DHCP option 66,67 (link)
• TR-069(link)

ONT HLX-TGV Upgrade on ZTE C620

Upgrade procedure is the same as for other HALNy ONTs (link)