How Can We Help?

HL-1GR SFU Configuration [HUAWEI]

Created On
Last Updated On
byDaniel M
You are here:
< All Topics
HL-2BV

HALNy HL-2BV Configuration

Service Scenario

HL-1GR can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
SFU mode allows to prepare different configurations – such as QinQ tunnel or VLAN translation on the ONT. In this tutorial we will focus on SFU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

Document Date and version2020.05.18
Tested on OLT Huawei MA5683TVersion: MA5600V800R017C10
Tested with ONT HALNy HL-1GRSupported on Version: V2.0.10 or above
Revision1
Let us know how to improve below document on: support@halny.com

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

ONT was connect to GPON port 1 (slot 0) with ONU_ID 24

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 400 – MGMT 

1. Create DBA profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 143 profile-name "HL-1GR_SFU_INT"
  ont-port eth 1 catv 1
  port vlan eth 1 translation 100 user-vlan 100
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 143 profile-name "HL-1GR_SFU_INT"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 400
  commit
  quit

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 1 24 sn-auth "48414C4E0F64AB40" omci ont-lineprofile-id 143 ont-srvprofile-id 143 desc "HL-1GR_SFU_INT"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 24 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 1 24 eth 1 vlan 100 priority 0

6. Create bbs-config

MA5683T(config)#service-port 89 vlan 100 gpon 0/0/1 ont 24 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 90 vlan 400 gpon 0/0/1 ont 24 gemport 1 multi-service user-vlan 400 tag-transform translate

7. Verify ONT ip-host IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig 1 24 [PORT-ID ONT-ID]
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.138
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F64-AB40
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

2. ONT configuration (Access mode, only IPTV)

ONT was connect to GPON port 1 (slot 0) with ONU_ID 25

In example configuration we used below VLANs:
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 400 – MGMT 

1. Create DBA profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 144 profile-name "HL-1GR_SFU_IPTV"
  ont-port eth 1 catv 1
  multicast mode igmp-snooping
  port vlan eth 1 translation 200 user-vlan 200
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ont-line-profile

MA5683T(config)#ont-lineprofile gpon profile-id 144 profile-name "HL-1GR_SFU_IPTV"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem mapping 0 0 vlan 200
  gem mapping 1 1 vlan 400
  commit
  quit

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 1 25 sn-auth "48414C4E0F64AB40" omci ont-lineprofile-id 144 ont-srvprofile-id 144 desc "HL-1GR_SFU_IPTV"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 25 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 1 25 eth 1 vlan 100 priority 0

6. Create bbs-config

MA5683T(config)#service-port 91 vlan 200 gpon 0/0/1 ont 25 gemport 0 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 92 vlan 400 gpon 0/0/1 ont 25 gemport 1 multi-service user-vlan 400 tag-transform translate

7. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 91 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 91
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

8. Verify ONT ip-host IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.138
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F64-AB40
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

3. ONT configuration (TRANSPARENT mode)

ONT was connect to GPON port 0 (slot 0) with ONU_ID 26

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 300 – VoIP
VLAN 400 – MGMT 

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 145 profile-name "HL-1GR_SFU_TRANS"
  ont-port eth 1 catv 1
  multicast-forward tag translation 200
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 1 translation 200 user-vlan 200
  port vlan eth 1 translation 300 user-vlan 300
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 145 profile-name "HL-1GR_SFU_TRANS"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

*HL-1GR SFU suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 1 26 sn-auth "48414C4E0F64AB40" omci ont-lineprofile-id 145 ont-srvprofile-id 145 desc "HL-1GR_SFU_TRANS"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 26 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)#service-port 93 vlan 100 gpon 0/0/1 ont 26 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 94 vlan 200 gpon 0/0/1 ont 26 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 95 vlan 300 gpon 0/0/1 ont 26 gemport 2 multi-service user-vlan 300 tag-transform translate
MA5683T(config)#service-port 96 vlan 400 gpon 0/0/1 ont 26 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 94 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 94
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

7. Verify ONT ip-host IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.138
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F64-AB40
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

4. ONT configuration (Hybrid mode)

ONT was connect to GPON port 1 (slot 0) with ONU_ID 27

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 400 – MGMT 

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 146 profile-name "HL-1GR_SFU_HYBRID"
  ont-port eth 1 catv 1
  igmp-forward translation 200
  multicast-forward tag translation 200
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 1 translation 200 user-vlan 200
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 146 profile-name "HL-1GR_SFU_HYBRID"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 400
  commit
  quit

*HL-1GR SFU suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 1 27 sn-auth "48414C4E0F64AB40" omci ont-lineprofile-id 146 ont-srvprofile-id 146 desc "HL-1GR_SFU_HYBRID"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 27 dhcp vlan 400 priority 0

5. Add ONT port configuration

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont port native-vlan 1 27 eth 1 vlan 100 priority 0

6. Create bbs-config

MA5683T(config)#service-port 97 vlan 100 gpon 0/0/1 ont 27 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 98 vlan 200 gpon 0/0/1 ont 27 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 99 vlan 400 gpon 0/0/1 ont 27 gemport 2 multi-service user-vlan 400 tag-transform translate

7. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 98 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 98
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config-btv)#default-policy service-port multicast-unknown transparent

8. Verify ONT ip-host IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.138
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F64-AB40
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

5. ONT configuration (VLAN translation – rBSA)

ONT was connect to GPON port 1 (slot 0) with ONU_ID 28

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 300 – VoIP
VLAN 400 – MGMT 

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 147 profile-name "HL-1GR_SFU_TRANSLATION"
  ont-port eth 1 catv 1
  multicast-forward tag translation 838
  port vlan eth 1 translation 100 user-vlan 35
  port vlan eth 1 translation 200 user-vlan 838
  port vlan eth 1 translation 300 user-vlan 839
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 147 profile-name "HL-1GR_SFU_TRANSLATION"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

*HL-1GR SFU suport to send transparently up to 10 vlans

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 28 sn-auth "48414C4E0F64AB40" omci ont-lineprofile-id 147 ont-srvprofile-id 147 desc "HL-1GR_SFU_TRANSLATION"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 28 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)#service-port 100 vlan 100 gpon 0/0/0 ont 28 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 101 vlan 200 gpon 0/0/0 ont 28 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 102 vlan 300 gpon 0/0/0 ont 28 gemport 2 multi-service user-vlan 300 tag-transform translate
MA5683T(config)#service-port 103 vlan 400 gpon 0/0/0 ont 28 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 101 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 101
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

7. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.138
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F64-AB40
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

6. ONT configuration (802.1q in 802.1q Begin/End of Tunnel)

ONT was connect to GPON port 1 (slot 0) with ONU_ID 29

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV
VLAN 300 – VoIP
VLAN 400 – MGMT 
VLAN 999 – SVLAN

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 148 profile-name "HL-1GR_SFU_QinQ"
  ont-port eth 1
  port vlan eth 1 translation 100 user-vlan 100
  port vlan eth 1 translation 200 user-vlan 200
  port vlan eth 1 translation 300 user-vlan 300
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 148 profile-name "HL-1GR_SFU_QinQ"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 0 29 sn-auth "48414C4E0F64AB40" omci ont-lineprofile-id 148 ont-srvprofile-id 148 desc "HL-1GR_SFU_QinQ"
MA5683T(config-if-gpon-0/0)#ont ipconfig 0 29 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)#service-port 104 vlan 999 gpon 0/0/1 ont 29 gemport 0 multi-service user-vlan 100 tag-transform default
MA5683T(config)#service-port 105 vlan 999 gpon 0/0/1 ont 29 gemport 1 multi-service user-vlan 200 tag-transform default
MA5683T(config)#service-port 106 vlan 999 gpon 0/0/1 ont 29 gemport 2 multi-service user-vlan 300 tag-transform default
MA5683T(config)#service-port 107 vlan 400 gpon 0/0/1 ont 29 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.138
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F64-AB40
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

7. ONT configuration (OSE / MdO)

ONT was connect to GPON port 1 (slot 0) with ONU_ID 30

In example configuration we used below VLANs:
VLAN 100 – MGMT VLAN
VLAN 200 –Service Y CVLAN
VLAN 300 – Service Z VLAN
VLAN 400 – MGMT 
VLAN 999 – SVLAN

1. Create DBA-profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 149 profile-name "HL-1GR_SFU_OSE"
  ont-port eth 1
  port vlan eth 1 translation 100 user-vlan 10
  port vlan eth 1 translation 200 user-vlan 11
  port vlan eth 1 translation 300 user-vlan 51
  port vlan iphost translation 400 user-vlan 400
  commit
  quit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 149 profile-name "HL-1GR_SFU_OSE"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  tcont 4 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem add 3 eth tcont 4
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 300
  gem mapping 3 3 vlan 400
  commit
  quit

4. Register ONT on GPON

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 1 30 sn-auth "48414C4E0F64AB40" omci ont-lineprofile-id 149 ont-srvprofile-id 149 desc "HL-1GR_SFU_OSE"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 30 dhcp vlan 400 priority 0

5.Create bbs-config

MA5683T(config)#service-port 108 vlan 999 gpon 0/0/1 ont 30 gemport 0 multi-service user-vlan 100 tag-transform default
MA5683T(config)#service-port 109 vlan 999 gpon 0/0/1 ont 30 gemport 1 multi-service user-vlan 200 tag-transform default
MA5683T(config)#service-port 110 vlan 999 gpon 0/0/1 ont 30 gemport 2 multi-service user-vlan 300 tag-transform default
MA5683T(config)#service-port 111 vlan 400 gpon 0/0/1 ont 30 gemport 3 multi-service user-vlan 400 tag-transform translate

6. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.60.138
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F64-AB40
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

ONT HL-1GR Upgrade on HUAWEI MA5683T

HL-1GR can be upgrade the same way as other HALNy ONTs, You can find upgrade procedure here.

Table of Contents
Hit enter to search or ESC to close

Search Page

The beauty of this theme is that is built with Modules. Every time you can active or dis-active any module that you would not need anymore ! Awesome WordPress Theme with latest technologies.

May We Suggest?