HALNy HL-4G/HL-4G2 SFU Configuration [RAISECOM ISCOM 6800]

Created On12 May 2025

Last Updated On14 May 2025

byDaniel Matuszek

HALNy HL-4G/HL-4G2 Configuration

Service scenario

HL-4G/HL-4G2 can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP (only if we want to use ip-host).
In this tutorial, we will focus on HGU mode configuration.

ONT configuration

Document Date and version	2025.05.12
Tested on OLT RAISECOM ISCOM 6800	Version: 2.63.SP1.1_20200102
Tested with ONT HALNy HL-4G	Supported on Version: V2.0.13 or above
Tested with ONT HALNy HL-4G2	Supported on Version: V4.0.8p1 or above
Revision	1

Let us know how to improve below document on: support@halny.com

Change vendor serial number

Log in to ONT via LAN: 192.168.33.1/cgi-bin/vendor-support.asp.
Change Vendor to RAISECOM RCMG
Apply configuration, ONT will reboot

Changing ONT’s serial number is described here

Supported SFU service scenarios

ONT is connected to the port 1/1

1. ONT configuration (Access mode, only INTERNET)

1.Create DBA profile:

create dba-profile 3 name DBA type3 assure 1024 max 1024000

2. Create gpon-onu-line profile

gpon-onu-line-profile 13
create tcont 1 dba-profile 3
create tcont 2 dba-profile 3
create gem 1 tcont 1
commit
gem 1 mapping 1 vlan 100
commit
create gem 2 tcont 2
commit
gem 2 mapping 1 vlan 400
commit

3. Create gpon-onu-service-profile

gpon-onu-service-profile 13
port-num ethernet 4
iphost-num 1
uni ethernet 1 vlan mode tagged
uni ethernet 1 native vlan 100
uni ethernet 2 vlan mode tagged
uni ethernet 2 native vlan 100
uni ethernet 3 vlan mode tagged
uni ethernet 3 native vlan 100
uni ethernet 4 vlan mode tagged
uni ethernet 4 native vlan 100
iphost 1 mode dhcp
iphost 1 native vlan 400
iphost 1 service management
commit

4. Create ONT

create gpon-onu 4 sn RCMG323C41F0 line-profile-id 13 service-profile-id 13

5. Display ONT ip-host 1 address

GPON(config)#show gpon-onu 1/1/4 iphost
ONU ID: 1/1/4
Iphost ID : 1
Mode : dhcp
IP Type : ipv4
IP Address : 0.0.0.0
Mask : 0.0.0.0
Default-gw : 0.0.0.0
VLAN : 400
Priority : 0
Allowed vlan : n/a
Pri-dns : 0.0.0.0
Sec-dns : 0.0.0.0
Sec-dns : 54db.a23c.41f0
PPPoe Username :
PPPoe Password :
Current IPAddr : 10.20.30.138
Current Mask : 255.255.255.0
Current-gw : 10.20.30.1
Current Pri-dns : 10.20.30.254
Current Sec-dns : 8.8.8.8
IPv6LinkLocalAddr : ::
IPv6Addr : ::
IPv6DefaultRouter : ::
IPv6PrimaryDNS : ::
IPv6SecondaryDNS : ::
IPv6DUID :

2. ONT configuration (Access mode, Internet, IPTV)

1.Create DBA profile:

create dba-profile 3 name DBA type3 assure 1024 max 1024000

2. Create gpon-onu-line profile

gpon-onu-line-profile 14
create tcont 1 dba-profile 3
create tcont 2 dba-profile 3
create tcont 3 dba-profile 3
create gem 1 tcont 1
commit
gem 1 mapping 1 vlan 100
commit
create gem 2 tcont 2
commit
gem 2 mapping 1 vlan 200
commit
create gem 3 tcont 3
commit
gem 3 mapping 1 vlan 400
commit

3. Create gpon-onu-service-profile

gpon-onu-service-profile 14
port-num ethernet 4
iphost-num 1
port-num ethernet 4
uni ethernet 1 vlan mode tagged
uni ethernet 1 native vlan 100
uni ethernet 2 vlan mode tagged
uni ethernet 2 native vlan 100
uni ethernet 3 vlan mode tagged
uni ethernet 3 native vlan 200
uni ethernet 3 immediate-leave enable
uni ethernet 4 vlan mode tagged
uni ethernet 4 native vlan 200
uni ethernet 4 immediate-leave enable
iphost 1 mode dhcp
iphost 1 native vlan 400
iphost 1 service management
commit

4. Create ONT

create gpon-onu 4 sn RCMG323C41F0 line-profile-id 14 service-profile-id 14

5. Display ONT ip-host 1 address

GPON(config)#show gpon-onu 1/1/4 iphost
ONU ID: 1/1/4
Iphost ID : 1
Mode : dhcp
IP Type : ipv4
IP Address : 0.0.0.0
Mask : 0.0.0.0
Default-gw : 0.0.0.0
VLAN : 400
Priority : 0
Allowed vlan : n/a
Pri-dns : 0.0.0.0
Sec-dns : 0.0.0.0
Sec-dns : 54db.a23c.41f0
PPPoe Username :
PPPoe Password :
Current IPAddr : 10.20.30.138
Current Mask : 255.255.255.0
Current-gw : 10.20.30.1
Current Pri-dns : 10.20.30.254
Current Sec-dns : 8.8.8.8
IPv6LinkLocalAddr : ::
IPv6Addr : ::
IPv6DefaultRouter : ::
IPv6PrimaryDNS : ::
IPv6SecondaryDNS : ::
IPv6DUID :

3. ONT configuration (TRANSPARENT mode)

1.Create DBA profile:

create dba-profile 3 name DBA type3 assure 1024 max 1024000

2. Create gpon-onu-line profile

gpon-onu-line-profile 15
create tcont 1 dba-profile 3
create tcont 2 dba-profile 3
create tcont 3 dba-profile 3
create tcont 4 dba-profile 3
create gem 1 tcont 1
commit
gem 1 mapping 1 vlan 100
commit
create gem 2 tcont 2
commit
gem 2 mapping 1 vlan 200
commit
create gem 3 tcont 3
commit
gem 3 mapping 1 vlan 300
commit
create gem 4 tcont 4
commit
gem 4 mapping 1 vlan 400
commit

3. Create gpon-onu-service-profile

gpon-onu-service-profile 15
port-num ethernet 4
iphost-num 1
uni ethernet 1 vlan mode trunk
uni ethernet 1 vlan trunk allowed 100,200,300
uni ethernet 2 vlan mode trunk
uni ethernet 2 vlan trunk allowed 100,200,300
uni ethernet 3 vlan mode trunk
uni ethernet 3 vlan trunk allowed 100,200,300
uni ethernet 4 vlan mode trunk
uni ethernet 4 vlan trunk allowed 100,200,300
iphost 1 mode dhcp
iphost 1 native vlan 500
iphost 1 service management
commit
quit

4. Create ONT

create gpon-onu 4 sn RCMG323C41F0 line-profile-id 15 service-profile-id 15

5. Display ONT ip-host 1 address

GPON(config)#show gpon-onu 1/1/4 iphost
ONU ID: 1/1/4
Iphost ID : 1
Mode : dhcp
IP Type : ipv4
IP Address : 0.0.0.0
Mask : 0.0.0.0
Default-gw : 0.0.0.0
VLAN : 400
Priority : 0
Allowed vlan : n/a
Pri-dns : 0.0.0.0
Sec-dns : 0.0.0.0
Sec-dns : e05a.9f6d.8538
PPPoe Username :
PPPoe Password :
Current IPAddr : 10.20.30.138
Current Mask : 255.255.255.0
Current-gw : 10.20.30.1
Current Pri-dns : 10.20.30.254
Current Sec-dns : 8.8.8.8
IPv6LinkLocalAddr : ::
IPv6Addr : ::
IPv6DefaultRouter : ::
IPv6PrimaryDNS : ::
IPv6SecondaryDNS : ::
IPv6DUID :

ONT HL-4G / HL-4G2 SFU Upgrade on RAISECOM ISCOM 6800

ONTs HL-4G / HL-4G2 can be upgraded the same way as other HALNy ONTs, You can find upgrade procedure here.


Model	WAN ports	LAN ports	WiFi	WiFi speed	Antennas	VoIP	Sales Status
Ethernet Routers
HLE-3GX-F	1×10/100/1000	3×10/100/1000	2T2R WiFi6	1800AX	Internal	-	In daily sales
HLE-4BX3V-F	1×100/1000/2500 Ethernet	3×10/100/1000 + 1×2500	2T2R WiFi6	WiFi6 AX3000	Internal	1xFXS	Coming soon!
Active Ethernet (SFP WAN)
HLS-4BX3V-F	1×1000/2500 SFP port	3×10/100/1000 + 1×2500	2T2R WiFi6	WiFi6 AX3000	Internal	1xFXS	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	-	In daily sales


Model Name	Mode	LAN	VoIP	WiFi	Mode button	Sales Status
HLX-SFPX	SFU (Bridge only)	1x1000/10000	-	-	-	Coming soon! Q1-25
HLX-1TL	SFU (Bridge only)	1x1000/2500/10000	-	-	-	Coming soon! Q1-25
HLX-1TLV	SFU (Bridge only)	1x1000/2500/10000	1	-	-	Coming soon! Q1-25
HLX-TGV	SFU (bridge) HGU (router NAT)	1x1000/2500/10000 1x10/100/1000	2	-	-	In daily sales
HLX-4BYV-F	HGU (router NAT)	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Triband 2.4/5/6GHz	Yes	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	In daily sales


Model	LAN ports	VoIP FXS POTS port	WiFi	WiFi antennas grain and type	WiFi speed	RF/CATV overlay	EtherWAN (LAN4 as Wan port)	USB port	SALES STATUS
HL-GSFP	SFP 1GbE/2.5GbE	-	-	-	-	-	-	-	In daily sales
HL-1GE	1×10/100/1000	-	-	-	-	-	-	-	In daily sales
HL-1GC	1×10/100/1000	-	-	-	-	-	-	-	In daily sales
HL-1B	1×100/1000/2500	-	-	-	-	-	-	-	New one! In daily sales
HL-4G2	4×10/100/1000	-	-	-	-	-	-	-	New one! In daily sales
HL-1GR	1×10/100/1000	-	-	-	-	1	-	-	In daily sales
HL-2BV	1×1000/2500 1×10/100/1000	1	-	-	-	-	-	-	In daily sales
HL-4GV	4×10/100/1000	2	-	-	-	-	-	-	New one! In daily sales
HL-4GMV2	4×10/100/1000	2	2T2R 802.11n 2T2R 802.11ac wave2	2x5dB (external)	866Mbps 5Ghz 300Mbps 2.4Ghz	-	YES	-	In daily sales
HL-4GMVR	4×10/100/1000	1	2T2R 802.11n 2T2R 802.11ac wave2	4x5dB (external)	866Mbps 5Ghz 300Mbps 2.4Ghz	1	YES	-	In daily sales
HL-4GX3VR	4×10/100/1000	1	2T2R AX3000 WiFi6	4x5dB (external)	3000Mbps for 2.4Ghz / 5Ghz	1	YES	-	New one! In daily sales
HL-4GXV-F	4×10/100/1000	1	802.11ax 1800AX WiFi6	2x2 internal	1800Mbs for 2.4Ghz / 5Ghz	-	YES	-	In daily sales
HL-4GXVU-F	4×10/100/1000	1	802.11ax 1800AX WiFi6	2x2 internal	1800Mbs for 2.4Ghz / 5Ghz	-	YES	1	New one! In daily sales
HL-4BX3V-F	3×10/100/1000 1×2500	1	2T3R AX3000 WiFi6	2x3 Internal	3000Mbs for 2.4Ghz / 5Ghz	-	YES	-	New one! In daily sales
HL-4BY3V-F	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Dual-Band 2.4Ghz/5Ghz	Internal	BE3600	-	YES	-	Coming soon!
HL-4BY7V-F	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Dual-Band 2.4Ghz/5Ghz 4x4	Internal	BE7200	-	YES	-	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	-	-	-	In daily sales

Have a Question?

HALNy HL-4G/HL-4G2 SFU Configuration [RAISECOM ISCOM 6800]

Service scenario

ONT configuration

Change vendor serial number

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

2. ONT configuration (Access mode, Internet, IPTV)

3. ONT configuration (TRANSPARENT mode)

ONT HL-4G / HL-4G2 SFU Upgrade on RAISECOM ISCOM 6800