HALNy HL-2GRV HGU Configuration [ZTE]

HALNy HL-2GRV Configuration

Service scenario

ONT configuration

This tutorial is based on ONT with firmware V3.0.10 and ZTE C320 running with firmware V2.1.0.

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 1/4/2)
VLAN 300 – VOIP
VLAN 400 – MGMT 

HL-2GRV supports the same service scenarios as HL-4GQVS/HL-4GXV-F, You can find scenarios with ONT configurations here.

The only one difference is setting ONT Type – You need to do this like below.

(config)# pon
  onu-type HL-MODEL gpon description DESC
  onu-type HL-MODEL gpon max-tcont 4
  onu-type HL-MODEL gpon max-gemport 32
  onu-type HL-MODEL gpon max-iphost 4
  onu-type-if HL-MODEL eth_0/1
  onu-type-if HL-MODEL eth_0/2
  onu-type-if HL-MODEL pots_0/1

ONT HL-2GRV Provisioning on ZTE C320

There are two ways of ONT provisioning:

• DHCP option 66,67 (link)
• TR-069(link)

ONT HL-2GRV Upgrade on ZTE C320

Upgrade procedure for HL-2GRV is the same as for other HALNy ONTs (link)