How Can We Help?

HALNy HL-1GE SFU Configuration [ZTE]

Created On
Last Updated On
byDaniel M
You are here:
< All Topics

HALNy HL-1GE Configuration

Service Scenario

HL-1GE can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
SFU mode allows to prepare different configurations – such as QinQ tunnel or VLAN translation on the ONT. In this tutorial, we will focus on SFU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

Document Date and version2020.05.28
Tested on OLT ZTE C320Version: V1.2.5P3
Tested with ONT HALNy HL-1GESupported on Version: V2.0.10 or above
Revision1
Let us know how to improve below document on: support@halny.com

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 400 – MGMT 

1. Create DBA profile

(config)# gpon
  profile tcont NAME type 4 maximum 102400

2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex onu-type HL-1GE gpon …

(config)# pon
  onu-type HL-MODEL gpon description DESC
  onu-type HL-MODEL gpon max-tcont 4
  onu-type HL-MODEL gpon max-gemport 32
  onu-type HL-MODEL gpon max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_RACK_ID/SHELF_ID/OLT-ID
  onu ONU_ID type HL-1GE sn HALN0802F5A7

4. Configure ONT interface mode

(config)# interface gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
  tcont 1 name TCONT_NAME  profile NAME
  tcont 2 name TCONT_NAME  profile NAME
  gemport 1 name GEM_NAME unicast tcont 1 dir both
  gemport 2 name GEM_NAME unicast tcont 2 dir both
  switchport mode hybrid vport 1
  service-port 1 vport 1 user-vlan 100 vlan 100
  switchport mode hybrid vport 2
  service-port 2 vport 2 user-vlan 400 vlan 400

5. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
 service NET gemport 1 cos 0 vlan 100
 service IPHOST iphost 1 gemport 2 cos 0 vlan 400
 ip-host 1 dhcp-enable true ping-response true traceroute-response true
 onu-vlan iphost 1 up-mode add up-prio 0 up-vid 400 down-mode untag
 onu-vlan ethuni eth_0/1 up-mode add up-prio 0 up-vid 100 down-mode untag

6. Verify ONT ip-host IP 1 address.

#show gpon remote-onu ip-host gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
Host ID:            1
HostName:
Identify:
IP:                 0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP-enable:        true
Ping-response:      true
Traceroute-response: true
MAC:                e05a.9f6f.fb18
CurIP:              172.16.241.14
CurMask:            255.255.240.0
CurGateway:         172.16.240.1
CurPriDNS:          8.8.8.8
CurSecDNS:          8.8.4.4
DomainName:

2. ONT configuration (Access mode, only IPTV)

In example configuration we used below VLANs:
VLAN 200 – IPTV (multicast uplink port 1/4/2)
VLAN 400 – MGMT 

1. Create DBA profile

gpon
  profile tcont NAME type 4 maximum 102400

2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex onu-type HL-1GE gpon …

pon
  onu-type HL-MODEL gpon description DESC
  onu-type HL-MODEL gpon max-tcont 4
  onu-type HL-MODEL gpon max-gemport 32
  onu-type HL-MODEL gpon max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

interface gpon-olt_RACK_ID/SHELF_ID/OLT-ID
  onu ONU_ID type HL-1GE sn HALN0802F5A7

4. Configure ONT interface mode

interface gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
  tcont 1 name TCONT_NAME  profile NAME
  tcont 2 name TCONT_NAME  profile NAME
  gemport 1 name GEM_NAME unicast tcont 1 dir both
  gemport 2 name GEM_NAME unicast tcont 2 dir both
  switchport mode hybrid vport 1
  service-port 1 vport 1 user-vlan 200 vlan 200
  switchport mode hybrid vport 2
  service-port 2 vport 2 user-vlan 400 vlan 400

5. Configure ONT remote management mode

pon-onu-mng gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
 service NET gemport 1 cos 0 vlan 200
 service IPHOST iphost 1 gemport 2 cos 0 vlan 400
 ip-host 1 dhcp-enable true ping-response true traceroute-response true
 onu-vlan iphost 1 up-mode add up-prio 0 up-vid 400 down-mode untag
 onu-vlan ethuni eth_0/1 up-mode add up-prio 0 up-vid 200 down-mode untag

6. Configure IGMP Snooping

(config)# igmp  mvlan 200 source-port gei_RACK_ID/SHELF_ID/PORT
(config)# igmp  mvlan 200 receive-port gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID vport 1

(config)# igmp  mvlan 200
(config)# igmp  mvlan 200 work-mode snooping

7. Verify ONT ip-host IP 1 address

show gpon remote-onu ip-host gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
Host ID:            1
HostName:
Identify:
IP:                 0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP-enable:        true
Ping-response:      true
Traceroute-response: true
MAC:                e05a.9f6f.fb18
CurIP:              172.16.241.14
CurMask:            255.255.240.0
CurGateway:         172.16.240.1
CurPriDNS:          8.8.8.8
CurSecDNS:          8.8.4.4
DomainName:

3. ONT configuration (TRANSPARENT mode)

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 1/4/2)
VLAN 300 – VoIP
VLAN 400 – MGMT 

1. Create DBA profile

gpon
  profile tcont NAME type 4 maximum 102400

2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex onu-type HL-1GE gpon …

pon
  onu-type HL-MODEL gpon description DESC
  onu-type HL-MODEL gpon max-tcont 4
  onu-type HL-MODEL gpon max-gemport 32
  onu-type HL-MODEL gpon max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

interface gpon-olt_RACK_ID/SHELF_ID/OLT-ID
  onu ONU_ID type HL-1GE sn HALN0802F5A7

*HL-1GE SFU suport to send transparently up to 10 vlans

4. Configure ONT interface mode

interface gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
  tcont 1 name TCONT_NAME  profile NAME
  tcont 2 name TCONT_NAME  profile NAME
  tcont 3 name TCONT_NAME  profile NAME
  tcont 4 name TCONT_NAME  profile NAME
  gemport 1 name GEM_NAME unicast tcont 1 dir both
  gemport 2 name GEM_NAME unicast tcont 2 dir both
  gemport 3 name GEM_NAME unicast tcont 3 dir both
  gemport 4 name GEM_NAME unicast tcont 4 dir both
  switchport mode hybrid vport 1
  service-port 1 vport 1 user-vlan 100 vlan 100
  switchport mode hybrid vport 2
  service-port 2 vport 2 user-vlan 200 vlan 200
  switchport mode hybrid vport 3
  service-port 3 vport 3 user-vlan 300 vlan 300
  switchport mode hybrid vport 4
  service-port 4 vport 4 user-vlan 400 vlan 400

5. Configure ONT remote management mode

pon-onu-mng gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
 service NET gemport 1 cos 0 vlan 100
 service IPTV gemport 2 cos 0 vlan 200
 service VOIP gemport 3 cos 0 vlan 300
 service IPHOST iphost 1 gemport 4 cos 0 vlan 400
 ip-host 1 dhcp-enable true ping-response true traceroute-response true
 onu-vlan iphost 1 up-mode add up-prio 0 up-vid 400 down-mode untag
 vlan port eth_0/1 mode trunk
 vlan port eth_0/1 vlan 100,200,300

6. Configure IGMP Snooping

igmp  mvlan 200 source-port gei_RACK_ID/SHELF_ID/PORT
igmp  mvlan 200 receive-port gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID vport 2

igmp  mvlan 200
igmp  mvlan 200 work-mode snooping

7. Verify ONT ip-host IP 1 address

show gpon remote-onu ip-host gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
Host ID:            1
HostName:
Identify:
IP:                 0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP-enable:        true
Ping-response:      true
Traceroute-response: true
MAC:                e05a.9f6f.fb18
CurIP:              172.16.241.14
CurMask:            255.255.240.0
CurGateway:         172.16.240.1
CurPriDNS:          8.8.8.8
CurSecDNS:          8.8.4.4
DomainName:

4. ONT configuration (VLAN translation – rBSA)

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 1/4/2)
VLAN 300 – VoIP
VLAN 400 – MGMT 

1. Create DBA profile

gpon
  profile tcont NAME type 4 maximum 102400

2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex onu-type HL-1GE gpon …

pon
  onu-type HL-MODEL gpon description DESC
  onu-type HL-MODEL gpon max-tcont 4
  onu-type HL-MODEL gpon max-gemport 32
  onu-type HL-MODEL gpon max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

interface gpon-olt_RACK_ID/SHELF_ID/OLT-ID
  onu ONU_ID type HL-1GE sn HALN0802F5A7

*HL-1GE SFU suport to send transparently up to 10 vlans

4. Configure ONT interface mode

interface gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
  tcont 1 name TCONT_NAME  profile NAME
  tcont 2 name TCONT_NAME  profile NAME
  tcont 3 name TCONT_NAME  profile NAME
  tcont 4 name TCONT_NAME  profile NAME
  gemport 1 name GEM_NAME unicast tcont 1 dir both
  gemport 2 name GEM_NAME unicast tcont 2 dir both
  gemport 3 name GEM_NAME unicast tcont 3 dir both
  gemport 4 name GEM_NAME unicast tcont 4 dir both
  switchport mode hybrid vport 1
  service-port 1 vport 1 user-vlan 35 vlan 100
  switchport mode hybrid vport 2
  service-port 2 vport 2 user-vlan 838 vlan 200
  switchport mode hybrid vport 3
  service-port 3 vport 3 user-vlan 839 vlan 300
  switchport mode hybrid vport 4
  service-port 4 vport 4 user-vlan 400 vlan 400

5. Configure ONT remote management mode

pon-onu-mng gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
 service NET gemport 1 cos 0 vlan 35
 service IPTV gemport 2 cos 0 vlan 838
 service VOIP gemport 3 cos 0 vlan 839
 service IPHOST iphost 1 gemport 4 cos 0 vlan 400
 ip-host 1 dhcp-enable true ping-response true traceroute-response true
 onu-vlan iphost 1 up-mode add up-prio 0 up-vid 400 down-mode untag
 vlan port eth_0/1 mode trunk
 vlan port eth_0/1 vlan 35,838,839

6. Configure IGMP Snooping

igmp  mvlan 200 source-port gei_RACK_ID/SHELF_ID/PORT
igmp  mvlan 200 receive-port gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID vport 2

igmp  mvlan 200
igmp  mvlan 200 work-mode snooping
mvlan-translate 200 to 838

7. Verify ONT ip-host IP 1 address

show gpon remote-onu ip-host gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
Host ID:            1
HostName:
Identify:
IP:                 0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP-enable:        true
Ping-response:      true
Traceroute-response: true
MAC:                e05a.9f6f.fb18
CurIP:              172.16.241.14
CurMask:            255.255.240.0
CurGateway:         172.16.240.1
CurPriDNS:          8.8.8.8
CurSecDNS:          8.8.4.4
DomainName:

Configuration of DHCP option 82 and PPPoE+

(config)# dhcp-option82 enable
(config)# ip dhcp enable
(config)# ip dhcp snooping
(config)# ip dhcp snooping vlan 100
(config)# pppoe-plus enable

Configuration of DHCP option 82 and PPPoE+ on ONT Interface 

(config)# interface gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
  port-location format ft vport 1-2
  port-location ft-cid  001111#NEO172558596723 vport 1-2
  dhcp-option82 enable vport 2
  pppoe-plus enable vport 1

5. ONT configuration (802.1q in 802.1q Begin/End of Tunnel)

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV
VLAN 300 – VoIP
VLAN 400 – MGMT 
VLAN 999 – SVLAN

1. Create DBA profile

gpon
  profile tcont NAME type 4 maximum 102400

2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex onu-type HL-1GE gpon …

pon
  onu-type HL-MODEL gpon description DESC
  onu-type HL-MODEL gpon max-tcont 4
  onu-type HL-MODEL gpon max-gemport 32
  onu-type HL-MODEL gpon max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

interface gpon-olt_RACK_ID/SHELF_ID/OLT-ID
  onu ONU_ID type HL-1GE sn HALN0802F5A7

4. Configure ONT interface mode

interface gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID
  tcont 1 name TCONT_NAME  profile NAME
  tcont 2 name TCONT_NAME  profile NAME
  tcont 3 name TCONT_NAME  profile NAME
  tcont 4 name TCONT_NAME  profile NAME
  gemport 1 name GEM_NAME unicast tcont 1 dir both
  gemport 2 name GEM_NAME unicast tcont 2 dir both
  gemport 3 name GEM_NAME unicast tcont 3 dir both
  gemport 4 name GEM_NAME unicast tcont 4 dir both
  switchport mode hybrid vport 1
  service-port 1 vport 1 user-vlan 100 vlan 100 svlan 999
  switchport mode hybrid vport 2
  service-port 2 vport 2 user-vlan 200 vlan 200 svlan 999
  switchport mode hybrid vport 3
  service-port 3 vport 3 user-vlan 300 vlan 300 svlan 999
  switchport mode hybrid vport 4
  service-port 4 vport 4 user-vlan 400 vlan 400

5. Configure ONT remote management mode

pon-onu-mng gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
 service NET gemport 1 cos 0 vlan 100
 service IPTV gemport 2 cos 0 vlan 200
 service VOIP gemport 3 cos 0 vlan 300
 service IPHOST iphost 1 gemport 4 cos 0 vlan 400
 ip-host 1 dhcp-enable true ping-response true traceroute-response true
 onu-vlan iphost 1 up-mode add up-prio 0 up-vid 400 down-mode untag
 vlan port eth_0/1 mode trunk
 vlan port eth_0/1 vlan 100,200,300

6. Configure IGMP Snooping

igmp  mvlan 200 source-port gei_RACK_ID/SHELF_ID/PORT
igmp  mvlan 200 receive-port gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID vport 2

igmp  mvlan 200
igmp  mvlan 200 work-mode snooping

7. Verify ONT ip-host IP 1 address

show gpon remote-onu ip-host gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID
Host ID:            1
HostName:
Identify:
IP:                 0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP-enable:        true
Ping-response:      true
Traceroute-response: true
MAC:                e05a.9f6f.fb18
CurIP:              172.16.241.14
CurMask:            255.255.240.0
CurGateway:         172.16.240.1
CurPriDNS:          8.8.8.8
CurSecDNS:          8.8.4.4
DomainName:

6. ONT configuration (802.1q in 802.1q Begin/End of Tunnel any CVID)

In example configuration we used below VLANs:
VLAN 999 – SVID
VLAN 400 – MGMT 

1. Create DBA profile

(config)# gpon
  profile tcont NAME type 4 maximum 102400

2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex onu-type HL-1GE gpon …

(config)# pon
  onu-type HL-MODEL gpon description DESC
  onu-type HL-MODEL gpon max-tcont 4
  onu-type HL-MODEL gpon max-gemport 32
  onu-type HL-MODEL gpon max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_RACK_ID/SHELF_ID/OLT-ID
  onu ONU_ID type HL-1GE sn HALN0802F5A7

4. Configure ONT interface mode

(config)# interface gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
  tcont 1 name TCONT_NAME  profile NAME
  tcont 2 name TCONT_NAME  profile NAME
  gemport 1 name GEM_NAME unicast tcont 1 dir both
  gemport 2 name GEM_NAME unicast tcont 2 dir both
  switchport mode hybrid vport 1
  service-port 1 vport 1 user-vlan 999 vlan 999
  switchport mode hybrid vport 2
  service-port 2 vport 2 user-vlan 400 vlan 400

5. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
 service QinQ gemport 1 cos 0 vlan 999
 service IPHOST iphost 1 gemport 2 cos 0 vlan 400
 ip-host 1 dhcp-enable true ping-response true traceroute-response true
 onu-vlan iphost 1 up-mode add up-prio 0 up-vid 400 down-mode untag
 onu-vlan ethuni eth_0/1 up-mode add up-prio 0 up-vid 999 down-mode untag

6. Verify ONT ip-host IP 1 address.

#show gpon remote-onu ip-host gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID 
Host ID:            1
HostName:
Identify:
IP:                 0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP-enable:        true
Ping-response:      true
Traceroute-response: true
MAC:                e05a.9f6f.fb18
CurIP:              172.16.241.14
CurMask:            255.255.240.0
CurGateway:         172.16.240.1
CurPriDNS:          8.8.8.8
CurSecDNS:          8.8.4.4
DomainName:

7. ONT configuration (OSE / MdO)

In example configuration we used below VLANs:
VLAN 100 – MGMT VLAN
VLAN 200 –Service Y CVLAN
VLAN 300 – Service Z VLAN
VLAN 400 – MGMT 
VLAN 999 – SVLAN

1. Create DBA profile

gpon
  profile tcont NAME type 4 maximum 102400

2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex onu-type HL-1GE gpon …

pon
  onu-type HL-MODEL gpon description DESC
  onu-type HL-MODEL gpon max-tcont 4
  onu-type HL-MODEL gpon max-gemport 32
  onu-type HL-MODEL gpon max-iphost 4
  onu-type-if HL-MODEL eth_0/1

3. Register ONT on GPON

interface gpon-olt_RACK_ID/SHELF_ID/OLT-ID
  onu ONU_ID type HL-1GE sn HALN0802F5A7

*HL-1GE SFU suport to send transparently up to 10 vlans

4. Configure ONT interface mode

interface gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID
  tcont 1 name TCONT_NAME  profile NAME
  tcont 2 name TCONT_NAME  profile NAME
  tcont 3 name TCONT_NAME  profile NAME
  tcont 4 name TCONT_NAME  profile NAME
  gemport 1 name GEM_NAME unicast tcont 1 dir both
  gemport 2 name GEM_NAME unicast tcont 2 dir both
  gemport 3 name GEM_NAME unicast tcont 3 dir both
  gemport 4 name GEM_NAME unicast tcont 4 dir both
  switchport mode hybrid vport 1
  service-port 1 vport 1 user-vlan 10 vlan 100 svlan 999
  switchport mode hybrid vport 2
  service-port 2 vport 2 user-vlan 11 vlan 200 svlan 999
  switchport mode hybrid vport 3
  service-port 3 vport 3 user-vlan 51 vlan 300 svlan 999
  switchport mode hybrid vport 4
  service-port 4 vport 4 user-vlan 400 vlan 400

5. Configure ONT remote management mode

pon-onu-mng gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID
 service NET gemport 1 cos 0 vlan 10
 service IPTV gemport 2 cos 0 vlan 11
 service VOIP gemport 3 cos 0 vlan 51
 service IPHOST iphost 1 gemport 4 cos 0 vlan 400
 ip-host 1 dhcp-enable true ping-response true traceroute-response true
 onu-vlan iphost 1 up-mode add up-prio 0 up-vid 400 down-mode untag
 vlan port eth_0/1 mode trunk
 vlan port eth_0/1 vlan 10,11,51

6. Configure IGMP Snooping

igmp  mvlan 200 source-port gei_RACK_ID/SHELF_ID/PORT
igmp  mvlan 200 receive-port gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID vport 2

igmp  mvlan 200
igmp  mvlan 200 work-mode snooping

7. Verify ONT ip-host IP 1 address

show gpon remote-onu ip-host gpon-onu_RACK_ID/SHELF_ID/OLT-ID:ONU_ID
Host ID:            1
HostName:
Identify:
IP:                 0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP-enable:        true
Ping-response:      true
Traceroute-response: true
MAC:                e05a.9f6f.fb18
CurIP:              172.16.241.14
CurMask:            255.255.240.0
CurGateway:         172.16.240.1
CurPriDNS:          8.8.8.8
CurSecDNS:          8.8.4.4
DomainName:

ONT HL-1GE SFU Upgrade on ZTE C320

Upgrade procedure for HL-1GE is the same as for other HALNy ONTs (link)

Table of Contents
Hit enter to search or ESC to close

Search Page

The beauty of this theme is that is built with Modules. Every time you can active or dis-active any module that you would not need anymore ! Awesome WordPress Theme with latest technologies.

May We Suggest?