How Can We Help?

HALNy HL-1GE / HL-1GE2 SFU Configuration [DASAN]

You are here:
< All Topics
HL-2BV

HALNy HL-2BV Configuration

Service scenario

HL-1GE / HL-1GE2 can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
SFU mode allows to prepare different configurations – such as QinQ tunnel or VLAN translation on the ONT. In this tutorial we will focus on SFU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

Document Date and version2020.05.29
Tested on OLT DASAN V5808Version: 1.04-0050
Tested with ONT HALNy HL-1GE / HL-1GE2Supported on Version: V2.0.10 or above
Revision1
Let us know how to improve below document on: support@halny.com

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

ONT was connect to the GPON port 2 with ONU_ID 15

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create access VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation INTERNET create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 100 cos 0 tpid 0x8100
  apply

3. Create MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create traffic-profile

 V5808(gpon)#traffic-profile HL-1GE_SFU_INT create
  tcont 1
   gemport 1/1
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 1
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    extended-vlan-tagging-operation INTERNET
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

5. Create onu-profile

V5808(gpon)#onu-profile HL-1GE_SFU_INT create
  traffic-profile HL-1GE_SFU_INT
  apply

6. Assign onu-profile to ONT

V5808(config-gpon-olt[2])#onu-profile 15 HL-1GE_SFU_INT

7. Verify ONT ip-host 1 IP address

V5808(config-gpon-olt[2])#show onu ip-host 15
---------------------------------------------------------------
 OLT : 2, ONU : 15, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e0:5a:9f:60:46:78
 Current IP            : 172.17.61.195
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.16.16.240
 Current Secondary DNS : 185.228.168.10
 Domain name           :
 Host name             :

2. ONT configuration (Access mode, only IPTV)

ONT was connect to the GPON port 2 with ONU_ID 16

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create multicast VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation IPTV create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 200 cos 0 tpid 0x8100
  apply

3. Create multicast-profile

V5808(gpon)#multicast-profile MULTI create
  igmp robustness-variable 7
  igmp access-list vid 200 dst-ip start 224.0.0.1 end 239.255.255.255 bw 4294952 gem 4094
  apply

4. Create MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

5. Create traffic-profile

 V5808(gpon)#traffic-profile HL-1GE_SFU_IPTV create
  tcont 1
   gemport 1/1
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 1
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    multicast-profile MULTI
    extended-vlan-tagging-operation IPTV
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

6. Create onu-profile

V5808(gpon)#onu-profile HL-1GE_SFU_IPTV create
  traffic-profile HL-1GE_SFU_IPTV
  apply

7. Assign onu-profile to ONT

V5808(config-gpon-olt[2])#onu-profile 16 HL-1GE_SFU_IPTV

8. Verify ONT ip-host 1 IP address

V5808(config-gpon-olt[2])#show onu ip-host 16
---------------------------------------------------------------
 OLT : 2, ONU : 16, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e0:5a:9f:60:46:78
 Current IP            : 172.17.61.195
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.16.16.240
 Current Secondary DNS : 185.228.168.10
 Domain name           :
 Host name             :

3. ONT configuration (TRANSPARENT mode)

ONT was connect to the GPON port 2 with ONU_ID 17

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create VLANs configuration

V5808(gpon)#extended-vlan-tagging-operation TRANS create
  downstream-mode enable
  single-tagged-frame 1
  filter inner vid 100 cos any tpid any
  treat remove single
  treat inner vid 100 cos copy-inner tpid copy-inner
  single-tagged-frame 2
  filter inner vid 200 cos any tpid any
  treat remove single
  treat inner vid 200 cos copy-inner tpid copy-inner
  single-tagged-frame 3
  filter inner vid 300 cos any tpid any
  treat remove single
  treat inner vid 300 cos copy-inner tpid copy-inner
  apply

*HL-1GE SFU suport to send transparently up to 10 vlans

3. Create MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create multicast-profile

V5808(gpon)#multicast-profile MULTI create
  igmp robustness-variable 7
  igmp access-list vid 200 dst-ip start 224.0.0.1 end 239.255.255.255 bw 4294952 gem 4094
  apply

5. Create traffic-profile

V5808(gpon)#traffic-profile HL-1GE_SFU_TRANS create
  tcont 1
   gemport 1/1
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 1
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    multicast-profile MULTI
    extended-vlan-tagging-operation TRANS
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

6. Create onu-profile

 V5808(gpon)#onu-profile HL-1GE_SFU_TRANS create
  traffic-profile HL-1GE_SFU_TRANS
  apply

7. Assign onu-profile to ONT

V5808(config-gpon-olt[2])#onu-profile 17 HL-1GE_SFU_TRANS

8. Verify ONT ip-host 1 IP address

V5808(config-gpon-olt[2])#show onu ip-host 17
---------------------------------------------------------------
 OLT : 2, ONU : 17, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e0:5a:9f:60:46:78
 Current IP            : 172.17.61.195
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.16.16.240
 Current Secondary DNS : 185.228.168.10
 Domain name           :
 Host name             :

4. ONT configuration (Hybrid mode)

ONT was connect to the GPON port 2 with ONU_ID 18

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create VLANs configuration

V5808(gpon)#extended-vlan-tagging-operation Hybrid create
  downstream-mode enable
  single-tagged-frame 1
  filter inner vid 200 cos any tpid any
  treat remove single
  treat inner vid 200 cos copy-inner tpid copy-inner
  untagged-frame 1
  treat inner vid 100 cos 0 tpid 0x8100
  apply

*HL-1GE SFU suport to send transparently up to 10 vlans

3. Create MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create multicast-profile

V5808(gpon)#multicast-profile MULTI create
  igmp robustness-variable 7
  igmp access-list vid 200 dst-ip start 224.0.0.1 end 239.255.255.255 bw 4294952 gem 4094
  apply

5. Create traffic-profile

V5808(gpon)#traffic-profile HL-1GE_SFU_Hybrid create
  tcont 1
   gemport 1/1
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 1
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    multicast-profile MULTI
    extended-vlan-tagging-operation Hybrid
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

6. Create onu-profile

 V5808(gpon)#onu-profile HL-1GE_SFU_Hybrid create
  traffic-profile HL-1GE_SFU_Hybrid
  apply

7. Assign onu-profile to ONT

V5808(config-gpon-olt[2])#onu-profile 18 HL-1GE_SFU_Hybrid

8. Verify ONT ip-host 1 IP address

V5808(config-gpon-olt[2])#show onu ip-host 18
---------------------------------------------------------------
 OLT : 2, ONU : 18, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e0:5a:9f:60:46:78
 Current IP            : 172.17.61.195
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.16.16.240
 Current Secondary DNS : 185.228.168.10
 Domain name           :
 Host name             :

5. ONT configuration (VLAN translation – rBSA)

ONT was connect to the GPON port 2 with ONU_ID 19

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create VLANs configuration

V5808(gpon)#extended-vlan-tagging-operation TRANS create
  downstream-mode enable
  single-tagged-frame 1
  filter inner vid 35 cos any tpid any
  treat remove single
  treat inner vid 100 cos copy-inner tpid copy-inner
  single-tagged-frame 2
  filter inner vid 838 cos any tpid any
  treat remove single
  treat inner vid 200 cos copy-inner tpid copy-inner
  single-tagged-frame 3
  filter inner vid 839 cos any tpid any
  treat remove single
  treat inner vid 300 cos copy-inner tpid copy-inner
  apply

*HL-1GE SFU suport to send transparently up to 10 vlans

3. Create MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create multicast-profile

V5808(gpon)#multicast-profile MULTI create
  igmp robustness-variable 7
  igmp access-list vid 200 dst-ip start 224.0.0.1 end 239.255.255.255 bw 4294952 gem 4094
  apply

5. Create traffic-profile

V5808(gpon)#traffic-profile HL-1GE_SFU_RBSA create
  tcont 1
   gemport 1/1-1/8
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 8
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    multicast-profile MULTI
    extended-vlan-tagging-operation RBSA
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

6. Create onu-profile

 V5808(gpon)#onu-profile HL-1GE_SFU_RBSA create
  traffic-profile HL-1GE_SFU_RBSA
  apply

7. Assign onu-profile to ONT

V5808(config-gpon-olt[2])#onu-profile 19 HL-1GE_SFU_RBSA

8. Verify ONT ip-host 1 IP address

V5808(config-gpon-olt[2])#show onu ip-host 19
---------------------------------------------------------------
 OLT : 2, ONU : 19, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e0:5a:9f:60:46:78
 Current IP            : 172.17.61.195
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.16.16.240
 Current Secondary DNS : 185.228.168.10
 Domain name           :
 Host name             :

6. ONT configuration (802.1q in 802.1q Begin/End of Tunnel)

ONT was connect to the GPON port 2 with ONU_ID 20

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create VLANs configuration

V5808(gpon)#extended-vlan-tagging-operation QinQ create
  downstream-mode enable
  single-tagged-frame 1
  filter inner vid any cos any tpid any
  treat inner vid 999 cos copy-inner tpid copy-inner
  apply

3. Create MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create traffic-profile

V5808(gpon)#traffic-profile HL-1GE_SFU_QinQ create
  tcont 1
   gemport 1/1
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 1
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    extended-vlan-tagging-operation QinQ
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

5. Create onu-profile

V5808(gpon)#onu-profile HL-1GE_SFU_QinQ create
  traffic-profile HL-1GE_SFU_QinQ
  apply

6. Assign onu-profile to ONT

V5808(config-gpon-olt[2])#onu-profile 20 HL-1GE_SFU_QinQ

7. Verify ONT ip-host 1 IP address

V5808(config-gpon-olt[2])#show onu ip-host 20
---------------------------------------------------------------
 OLT : 2, ONU : 20, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e0:5a:9f:60:46:78
 Current IP            : 172.17.61.195
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.16.16.240
 Current Secondary DNS : 185.228.168.10
 Domain name           :
 Host name             :

7. Transparent QinQ

ONT was connect to the GPON port 2 with ONU_ID 21

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create VLANs configuration

V5808(gpon)#extended-vlan-tagging-operation TRANS-QinQ create
  downstream-mode enable
  double-tagged-frame 1
   filter outer vid 999 cos any tpid any
   filter inner vid any cos any tpid any
   treat remove double
   treat outer vid 999 cos copy-inner tpid copy-inner
   treat inner vid copy-inner cos copy-inner tpid copy-inner
  apply

3. Create MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create traffic-profile

V5808(gpon)#traffic-profile HL-1GE_SFU_TRANS_QinQ create
  tcont 1
   gemport 1/1
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 1
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    extended-vlan-tagging-operation TRANS-QinQ
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

5. Create onu-profile

V5808(gpon)#onu-profile HL-1GE_SFU_TRANS_QinQ create
  traffic-profile HL-1GE_SFU_TRANS_QinQ
  apply

6. Assign onu-profile to ONT

V5808(config-gpon-olt[2])#onu-profile 21 HL-1GE_SFU_TRANS_QinQ

7. Verify ONT ip-host 1 IP address

V5808(config-gpon-olt[2])#show onu ip-host 21
---------------------------------------------------------------
 OLT : 2, ONU : 21, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e0:5a:9f:60:46:78
 Current IP            : 172.17.61.195
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.16.16.240
 Current Secondary DNS : 185.228.168.10
 Domain name           :
 Host name             :

8. ONT configuration (OSE / MdO)

ONT was connect to the GPON port 2 with ONU_ID 22

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create VLANs configuration

 V5808(gpon)#extended-vlan-tagging-operation OSE create
  downstream-mode enable
  single-tagged-frame 1
   filter inner vid 10 cos any tpid any
   treat remove single
   treat outer vid 999 cos 0 tpid 0x8100
   treat inner vid 100 cos copy-inner tpid copy-inner
  single-tagged-frame 2
   filter inner vid 11 cos any tpid any
   treat remove single
   treat outer vid 999 cos 0 tpid 0x8100
   treat inner vid 200 cos copy-inner tpid copy-inner
  single-tagged-frame 3
   filter inner vid 51 cos any tpid any
   treat remove single
   treat outer vid 999 cos 0 tpid 0x8100
   treat inner vid 300 cos copy-inner tpid copy-inner
  apply

3. Create MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create traffic-profile

V5808(gpon)#traffic-profile HL-1GE_SFU_OSE create
  tcont 1
   gemport 1/1
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 1
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    extended-vlan-tagging-operation OSE
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

5. Create onu-profile

V5808(gpon)#onu-profile HL-1GE_SFU_OSE create
  traffic-profile HL-1GE_SFU_OSE
  apply

6. Assign onu-profile to ONT

V5808(config-gpon-olt[2])#onu-profile 22 HL-1GE_SFU_OSE

7. Verify ONT ip-host 1 IP address

V5808(config-gpon-olt[2])#show onu ip-host 22
---------------------------------------------------------------
 OLT : 2, ONU : 22, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e0:5a:9f:60:46:78
 Current IP            : 172.17.61.195
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.16.16.240
 Current Secondary DNS : 185.228.168.10
 Domain name           :
 Host name             :

ONT HL-1GE / HL-1GE2 SFU upgrade on DASAN OLTs

HL-1GE / HL-1GE2 can be upgrade the same way as other HALNy ONTs, You can find upgrade procedure here.


Table of Contents