How Can We Help?

HALNy HL-1GE / HL-1GE2 SFU Configuration [DASAN]

Created On
Last Updated On
byDaniel M
You are here:
< All Topics

HALNy HL-1GE Configuration

Service scenario

HL-1GE / HL-1GE2 can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
SFU mode allows to prepare different configurations – such as QinQ tunnel or VLAN translation on the ONT. In this tutorial we will focus on SFU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

Document Date and version2024.05.13
Tested on OLT DASAN V1-16XCVersion: R5.04-047
Tested with ONT HALNy HL-1GE / HL-1GE2Supported on Version: V2.0.25p1 or above
Revision1
Let us know how to improve below document on: support@halny.com

Supported SFU service scenarios

GPON port configuration

Define OLT vlan-flow

 olt vlan-flow 1 s-vid 400 tpid 0x8100 mac-lookup
 olt vlan-flow 2 s-vid 100 tpid 0x8100 mac-lookup
 olt vlan-flow 3 s-vid 200 tpid 0x8100 mac-lookup
 olt vlan-flow 4 s-vid 300 tpid 0x8100 mac-lookup

1. ONT configuration (Access mode, only INTERNET)

ONT was connect to the GPON port 0/2 with ONU_ID 11

1. Create DBA Profile

V1-16XC(config)# dba-profile DBA
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create access VLAN configuration

V1-16XC(config)# extended-vlan-tagging-operation INTERNET
  downstream-mode enable
  untagged-frame 1
  treat inner vid 100 cos 0 tpid 0x8100
  apply

3. Create MGMT VLAN configuration

V1-16XC(config)# extended-vlan-tagging-operation MGMT
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create traffic-profile

 V1-16XC(config)# traffic-profile HL-1GE_SFU_INT
  tcont 1
   gemport 1/1
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 1
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    extended-vlan-tagging-operation INTERNET
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

5. Create onu-profile

V1-16XC(config)# onu-profile HL-1GE_SFU_INT
  traffic-profile HL-1GE_SFU_INT
  apply

6. Assign onu-profile to ONT

V1-16XC(config-if[gpon0/2])# onu-profile 11 HL-1GE_SFU_INT

7. Assign ‘olt vp’ rules

V1-16XC(config-if[gpon0/2])# olt vp 17 vlan-flow 1 s-vid 400 mapping-onu 11 gemport 2/1
V1-16XC(config-if[gpon0/2])# olt vp 18 vlan-flow 2 c-vid 100 mapping-onu 11 gemport 1/1

8. Verify ONT ip-host 1 IP address

V1-16XC(config-if[gpon0/2])# show onu ip-host 11
---------------------------------------------------------------
 OLT : gpon0/2, ONU : 11, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e05a.9f60.44b0
 Current IP            : 172.17.60.174
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.17.61.224
 Current Secondary DNS : 172.17.60.1
 Domain name           :
 Host name             : IPHOST: WWW/XML/TR069

2. ONT configuration (Access mode, only IPTV)

ONT was connect to the GPON port 0/2 with ONU_ID 12

1. Create DBA Profile

V1-16XC(config)# dba-profile DBA
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create multicast VLAN configuration

V1-16XC(config)# extended-vlan-tagging-operation IPTV
  downstream-mode enable
  untagged-frame 1
  treat inner vid 200 cos 0 tpid 0x8100
  apply

3. Create multicast-profile

V1-16XC(config)# multicast-profile MULTI
  igmp robustness-variable 7
  igmp access-list vid 200 dst-ip start 224.0.0.1 end 239.255.255.255 bw 4294952 gem 4094
  apply

4. Create MGMT VLAN configuration

V1-16XC(config)# extended-vlan-tagging-operation MGMT
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

5. Create traffic-profile

 V1-16XC(config)# traffic-profile HL-1GE_SFU_IPTV
  tcont 1
   gemport 1/1
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 1
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    multicast-profile MULTI
    extended-vlan-tagging-operation IPTV
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

6. Create onu-profile

V1-16XC(config)# onu-profile HL-1GE_SFU_IPTV
  traffic-profile HL-1GE_SFU_IPTV
  apply

7. Assign onu-profile to ONT

V1-16XC(config-if[gpon0/2])# onu-profile 12 HL-1GE_SFU_IPTV

8. Assign ‘olt vp’ rules

V1-16XC(config-if[gpon0/2])# olt vp 19 vlan-flow 1 s-vid 400 mapping-onu 12 gemport 2/1
V1-16XC(config-if[gpon0/2])# olt vp 20 vlan-flow 3 c-vid 200 mapping-onu 12 gemport 1/1

9. Verify ONT ip-host 1 IP address

V1-16XC(config-if[gpon0/2])# show onu ip-host 12
---------------------------------------------------------------
 OLT : gpon0/2, ONU : 12, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e05a.9f60.44b0
 Current IP            : 172.17.60.174
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.17.61.224
 Current Secondary DNS : 172.17.60.1
 Domain name           :
 Host name             : IPHOST: WWW/XML/TR069

3. ONT configuration (TRANSPARENT mode)

ONT was connect to the GPON port 0/2 with ONU_ID 13

1. Create DBA Profile

V1-16XC(config)# dba-profile DBA
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create VLANs configuration

V1-16XC(config)# extended-vlan-tagging-operation TRANS
  downstream-mode enable
  single-tagged-frame 1
  filter inner vid 100 cos any tpid any
  treat remove single
  treat inner vid 100 cos 6 tpid copy-inner
  single-tagged-frame 2
  filter inner vid 200 cos any tpid any
  treat remove single
  treat inner vid 200 cos 5 tpid copy-inner
  single-tagged-frame 3
  filter inner vid 300 cos any tpid any
  treat remove single
  treat inner vid 300 cos 2 tpid copy-inner
  apply

*HL-1GE / HL-1GE2 SFU suports to send transparently up to 8 vlans

3. Create MGMT VLAN configuration

V1-16XC(config)# extended-vlan-tagging-operation MGMT
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create multicast-profile

V1-16XC(config)# multicast-profile MULTI
  igmp robustness-variable 7
  igmp access-list vid 200 dst-ip start 224.0.0.1 end 239.255.255.255 bw 4294952 gem 4094
  apply

5. Create traffic-profile

V1-16XC(config)# traffic-profile HL-1GE_SFU_TRANS
  tcont 1
   gemport 1/1-1/8
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 8
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    multicast-profile MULTI
    extended-vlan-tagging-operation TRANS
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

6. Create onu-profile

 V1-16XC(config)# onu-profile HL-1GE_SFU_TRANS
  traffic-profile HL-1GE_SFU_TRANS
  apply

7. Assign onu-profile to ONT

V1-16XC(config-if[gpon0/2])# onu-profile 13 HL-1GE_SFU_TRANS

8. Assign ‘olt vp’ rules

V1-16XC(config-if[gpon0/2])# olt vp 21 vlan-flow 1 s-vid 400 mapping-onu 13 gemport 2/1
V1-16XC(config-if[gpon0/2])# olt vp 22 vlan-flow 2 c-vid 100 mapping-onu 13 gemport 1/7
V1-16XC(config-if[gpon0/2])# olt vp 23 vlan-flow 3 c-vid 200 mapping-onu 13 gemport 1/6
V1-16XC(config-if[gpon0/2])# olt vp 24 vlan-flow 4 c-vid 300 mapping-onu 13 gemport 1/3

9. Verify ONT ip-host 1 IP address

V1-16XC(config-if[gpon0/2])# show onu ip-host 13
---------------------------------------------------------------
 OLT : gpon0/2, ONU : 13, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e05a.9f60.44b0
 Current IP            : 172.17.60.174
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.17.61.224
 Current Secondary DNS : 172.17.60.1
 Domain name           :
 Host name             : IPHOST: WWW/XML/TR069

4. ONT configuration (Hybrid mode)

ONT was connect to the GPON port 0/2 with ONU_ID 14

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create VLANs configuration

V5808(gpon)#extended-vlan-tagging-operation Hybrid create
  downstream-mode enable
  single-tagged-frame 1
  filter inner vid 200 cos any tpid any
  treat remove single
  treat inner vid 200 cos copy-inner tpid copy-inner
  untagged-frame 1
  treat inner vid 100 cos 0 tpid 0x8100
  apply

*HL-1GE / HL-1GE2 SFU suport to send transparently up to 8 vlans

3. Create MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create multicast-profile

V5808(gpon)#multicast-profile MULTI create
  igmp robustness-variable 7
  igmp access-list vid 200 dst-ip start 224.0.0.1 end 239.255.255.255 bw 4294952 gem 4094
  apply

5. Create traffic-profile

V5808(gpon)#traffic-profile HL-1GE_SFU_Hybrid create
  tcont 1
   gemport 1/1
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 1
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    multicast-profile MULTI
    extended-vlan-tagging-operation Hybrid
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

6. Create onu-profile

 V5808(gpon)#onu-profile HL-1GE_SFU_Hybrid create
  traffic-profile HL-1GE_SFU_Hybrid
  apply

7. Assign onu-profile to ONT

V5808(config-gpon-olt[2])#onu-profile 14 HL-1GE_SFU_Hybrid

8. Assign OLT vp rules

V1-16XC(config-if[gpon0/2])# olt vp 24 vlan-flow 1 s-vid 400 mapping-onu 14 gemport 2/1
V1-16XC(config-if[gpon0/2])# olt vp 25 vlan-flow 2 c-vid 100 mapping-onu 14 gemport 1/7
V1-16XC(config-if[gpon0/2])# olt vp 26 vlan-flow 3 c-vid 200 mapping-onu 14 gemport 1/6

9. Verify ONT ip-host 1 IP address

V1-16XC(config-if[gpon0/2])# show onu ip-host 14
---------------------------------------------------------------
 OLT : gpon0/2, ONU : 14, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e05a.9f60.44b0
 Current IP            : 172.17.60.174
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.17.61.224
 Current Secondary DNS : 172.17.60.1
 Domain name           :
 Host name             : IPHOST: WWW/XML/TR069

5. ONT configuration (VLAN translation – rBSA)

ONT was connect to the GPON port 2 with ONU_ID 15

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create VLANs configuration

V5808(gpon)#extended-vlan-tagging-operation TRANS create
  downstream-mode enable
  single-tagged-frame 1
  filter inner vid 35 cos any tpid any
  treat remove single
  treat inner vid 100 cos 6 tpid copy-inner
  single-tagged-frame 2
  filter inner vid 838 cos any tpid any
  treat remove single
  treat inner vid 200 cos 5 tpid copy-inner
  single-tagged-frame 3
  filter inner vid 839 cos any tpid any
  treat remove single
  treat inner vid 300 cos 2 tpid copy-inner
  apply

*HL-1GE SFU suport to send transparently up to 10 vlans

3. Create MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create multicast-profile

V5808(gpon)#multicast-profile MULTI
  igmp robustness-variable 7
  igmp access-list vid 200 dst-ip start 224.0.0.1 end 239.255.255.255 bw 4294952 gem 4094
  apply

5. Create traffic-profile

V5808(gpon)#traffic-profile HL-1GE_SFU_RBSA
  tcont 1
   gemport 1/1-1/8
   dba-profile DBA
  tcont 2
   gemport 2/1
   dba-profile DBA
  mapper 1
   gemport count 8
  mapper 2
   gemport count 1
  bridge 1
   ani mapper 1
   uni eth 1
    multicast-profile MULTI
    extended-vlan-tagging-operation RBSA
    max-frame 2036
  bridge 2
   ani mapper 2
   link ip-host-config 1
  ip-host-config 1
   ip address dhcp
   extended-vlan-tagging-operation MGMT
  apply

6. Create onu-profile

 V5808(gpon)#onu-profile HL-1GE_SFU_RBSA
  traffic-profile HL-1GE_SFU_RBSA
  apply

7. Assign onu-profile to ONT

V5808(config-gpon-olt[2])#onu-profile 15 HL-1GE_SFU_RBSA

8. Assign OLT vp rules.

V1-16XC(config-if[gpon0/2])# olt vp 27 vlan-flow 1 s-vid 400 mapping-onu 15 gemport 2/1
V1-16XC(config-if[gpon0/2])# olt vp 28 vlan-flow 2 c-vid 100 mapping-onu 15 gemport 1/7
V1-16XC(config-if[gpon0/2])# olt vp 29 vlan-flow 3 c-vid 200 mapping-onu 15 gemport 1/6
V1-16XC(config-if[gpon0/2])# olt vp 30 vlan-flow 4 c-vid 300 mapping-onu 15 gemport 1/3

9. Verify ONT ip-host 1 IP address

V1-16XC(config-if[gpon0/2])# show onu ip-host 15
---------------------------------------------------------------
 OLT : gpon0/2, ONU : 15, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : e05a.9f60.44b0
 Current IP            : 172.17.60.174
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.17.61.224
 Current Secondary DNS : 172.17.60.1
 Domain name           :
 Host name             : IPHOST: WWW/XML/TR069

ONT HL-1GE / HL-1GE2 SFU upgrade on DASAN OLTs

HL-1GE / HL-1GE2 can be upgrade the same way as other HALNy ONTs, You can find upgrade procedure here.

Table of Contents
Hit enter to search or ESC to close

Search Page

The beauty of this theme is that is built with Modules. Every time you can active or dis-active any module that you would not need anymore ! Awesome WordPress Theme with latest technologies.

May We Suggest?