How Can We Help?

HL-4G / HL-4G2 HGU Configuration [HUAWEI]

You are here:
< All Topics

HALNy HL-4G Configuration

Service scenario


HL-4G / HL-4G2 can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
SFU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
SFU mode allows to prepare different configurations – such as QiQ tunnel or VLAN translation on the ONT. In this tutorial we will focus on SFU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

ONT configuration

Document Date and version2020.06.01
Tested on OLT Huawei MA5683TVersion: MA5600V800R017C10
Tested with ONT HALNy HL-4G HGUSupported on Version: V2.0.10 or above
Tested with ONT HALNy HL-4G2 HGUSupported on Version: V4.04 or above
Revision1
Let us know how to improve below document on: support@halny.com

ONT was connect to the GPON port 1 (slot 0) with ONU_ID 12

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 0/7/0)
VLAN 400 – MGMT 

1. Create DBA profile

MA5683T(config)#dba-profile add profile-id 17 profile-name "dba-profile_17" type4 max 1024000

2. Create ONT srvprofile

MA5683T(config)#ont-srvprofile gpon profile-id 131 profile-name "HL-4G"
  ont-port eth 4
  igmp-forward translation 200
  multicast-forward tag transparent
  port vlan iphost translation 400 user-vlan 400
  commit

3. Create ONT lineprofile

MA5683T(config)#ont-lineprofile gpon profile-id 131 profile-name "HL-4G"
  fec-upstream enable
  tcont 1 dba-profile-id 17
  tcont 2 dba-profile-id 17
  tcont 3 dba-profile-id 17
  gem add 0 eth tcont 1
  gem add 1 eth tcont 2
  gem add 2 eth tcont 3
  gem mapping 0 0 vlan 100
  gem mapping 1 1 vlan 200
  gem mapping 2 2 vlan 400
  commit
  quit

4. Register ONT on GPON and configure ip-host 1

MA5683T(config)#interface gpon 0/0
MA5683T(config-if-gpon-0/0)#ont add 1 12 sn-auth "48414C4E206FFFE0" omci ont-lineprofile-id 131 ont-srvprofile-id 131 desc "HL-4G"
MA5683T(config-if-gpon-0/0)#ont ipconfig 1 12 dhcp vlan 400 priority 0

5. Create bbs-config

MA5683T(config)#service-port 57 vlan 100 gpon 0/0/1 ont 12 gemport 0 multi-service user-vlan 100 tag-transform translate
MA5683T(config)#service-port 58 vlan 200 gpon 0/0/1 ont 12 gemport 1 multi-service user-vlan 200 tag-transform translate
MA5683T(config)#service-port 59 vlan 400 gpon 0/0/1 ont 12 gemport 2 multi-service user-vlan 400 tag-transform translate

6. Create btv-config

MA5683T(config)#btv
MA5683T(config-btv)#igmp user add service-port 58 no-auth
MA5683T(config-btv)#multicast-vlan 200
  igmp default uplink-port 0/7/0
  igmp query-proxy disable
  igmp version v2
  igmp match mode disable
  igmp multicast-vlan member service-port 58
  igmp mode snooping
  igmp uplink-port 0/7/0
  quit
MA5683T(config)#default-policy service-port multicast-unknown transparent

7. Verify ONT ip-host 1 IP address

MA5683T(config-if-gpon-0/0)#display ont ipconfig PORT-ID ONT-ID
  --------------------------------------------------------------------
  ONT IP host index        : 0
  ONT config type          : DHCP
  ONT IP                   : 172.17.61.132
  ONT subnet mask          : 255.255.254.0
  ONT gateway              : 172.17.60.1
  ONT primary DNS          : 172.16.16.240
  ONT slave DNS            : 89.231.1.206
  ONT MAC                  : E05A-9F6F-FF98
  ONT manage VLAN          : 400
  ONT manage priority      : 0
  Dscp mapping table index : 0
  --------------------------------------------------------------------

ONT HL-4G / HL-4G2 Provisioning on HUAWEI MA5683T

There are three ways of ONT provisioning:

  • DHCP option 66,67 (link)
  • Huawei XML provisioning (link)
  • TR-069(link)

ONT HL-4G / HL-4G2 Upgrade on HUAWEI MA5683T

HL-4G / HL-4G2 can be upgrade the same way as other HALNy ONTs, You can find upgrade procedure here.


Table of Contents