How Can We Help?
HL-GSFP Configuration [ZYXEL]
HALNy HL-GSFP Configuration
Service scenario
HL-GSFP works only in SFU (bridge) mode. SFU mode allows to prepare different configurations – such as transparent or VLAN translation on the ONT.
Document Date and version | 2023.06.28 |
Tested on ZYXEL OLT1404A | Version: V4.02(ABJB.3)C0_200904 |
Tested with ONT HALNy HL-GSFP | Supported on Version: V1.0.9 or above |
Revision | 1 |
Let us know how to improve below document on: support@halny.com |
Supported SFU service scenarios
1. ONT configuration (Access mode, only INTERNET)
ONT was connect to the GPON port 2 with ONU_ID 30
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-30
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD8B8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# host-ip vlan 400
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-30-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 100
OLT1404A(config-remote-veip-uniport)# no inactive
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-30 host-ip
----------------------+--------------------
AID : ont-2-30
----------------------+--------------------
vlan Id-config : 400
IP type-config : dynamic
IP address : 172.17.60.173
IP mask : 255.255.254.0
IP gateway : 172.17.60.1
IP Primary DNS : 172.17.61.224
IP Secondary DNS : 172.17.60.1
----------------------+--------------------
2. ONT configuration (Access mode, only IPTV)
ONT was connect to the GPON port 2 with ONU_ID 31
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-31
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD8B8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# host-ip vlan 400
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-31-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 200 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 200
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-31 host-ip
----------------------+--------------------
AID : ont-2-31
----------------------+--------------------
vlan Id-config : 400
IP type-config : dynamic
IP address : 172.17.60.173
IP mask : 255.255.254.0
IP gateway : 172.17.60.1
IP Primary DNS : 172.17.61.224
IP Secondary DNS : 172.17.60.1
----------------------+--------------------
3. ONT configuration (TRANSPARENT mode)
ONT was connect to the GPON port 2 with ONU_ID 32
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-32
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD8B8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# host-ip vlan 400
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-32-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-32 host-ip
----------------------+--------------------
AID : ont-2-32
----------------------+--------------------
vlan Id-config : 400
IP type-config : dynamic
IP address : 172.17.60.173
IP mask : 255.255.254.0
IP gateway : 172.17.60.1
IP Primary DNS : 172.17.61.224
IP Secondary DNS : 172.17.60.1
----------------------+--------------------
4. ONT configuration (Hybrid mode)
ONT was connect to the GPON port 2 with ONU_ID 33
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-33
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD8B8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# host-ip vlan 400
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-33-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 100
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-33 host-ip
----------------------+--------------------
AID : ont-2-33
----------------------+--------------------
vlan Id-config : 400
IP type-config : dynamic
IP address : 172.17.60.173
IP mask : 255.255.254.0
IP gateway : 172.17.60.1
IP Primary DNS : 172.17.61.224
IP Secondary DNS : 172.17.60.1
----------------------+--------------------
5. ONT configuration (VLAN translation – rBSA)
ONT was connect to the GPON port 2 with ONU_ID 34
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-34
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD8B8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# host-ip vlan 400
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-34-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 35 network 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 838 network 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 839 network 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 838 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-34 host-ip
----------------------+--------------------
AID : ont-2-34
----------------------+--------------------
vlan Id-config : 400
IP type-config : dynamic
IP address : 172.17.60.173
IP mask : 255.255.254.0
IP gateway : 172.17.60.1
IP Primary DNS : 172.17.61.224
IP Secondary DNS : 172.17.60.1
----------------------+--------------------
ONT HL-GSFP upgrade on ZYXEL OLT1404A/OLT1408A
HL-GSFP can be upgrade the same way as other HALNy ONTs, You can find upgrade procedure here.