HL-1GC
Single Gigabit Port GPON ONT C+ transceiver with ROUTER and NATPRODUCT DESCRIPTION
GPON Optical Network Termination products are designed for operators and service providers who seek advantage from the expanded capacity of a fiber access network.
HL-1GC is a GPON ONT that acts as GPON Demarcation Device and is designed to provide affordable access to FTTH networks for Business and Residential use. HL-1GE design guarantees multi-interoperability with a number of OLT vendors as well as with BBF.247 Interoperability test plan.
All products within the GPON family are compliant with current ITU-T standards for gigabit passive optical networks (GPONs). The solution is designed to optimize the deployment and roll-out of the service provider. The products use a single fiber to connect individual houses and businesses to the network for broadband services up to gigabit speeds.The flexible product design enables a variety of product features and available interfaces. All units have Layer 2 functionality by default. This includes advanced support for L2 VLAN’s, L2 QoS and Multicast IGMP as well as Router and NAT features in single unit.
The ONT/ONU products are tested and have proven interoperability with most major GPON OLT Vendors. HALNy specializes in cost-effective designs, and works closely with service providers to improve their business case through a comprehensive range of standard products, supporting the industry’s common demands. HALNy also provides custom designs and services to meet unique customer needs. The network interface is compliant with ITU-T G.984.5 to provide 2.5 Gb/s downstream and 1.25 Gb/s upstream. LAN interface provides Gigabit service.
HALNy specializes in cost-effective designs, and works closely with service providers to improve their business case through a comprehensive range of standard products, supporting the industry’s common demands. HALNy also provides custom designs and services to meet unique customer needs.
HARDWARE SPECIFICATION
WAN Port: | GPON SC/APC C+ 2.488Gbps Downstream 1.244Gbps Upstream | Operating Temp: | 0 ~ 45 C |
GPON RX Input: | -10 ~ -27 dBm | Storage Temp: | -20 ~ 70 C |
GPON TX Output: | 3 ~ 7 dBm | Flash: | Hold two software sets, for active and backup ONT firmware |
LAN Ports: | 1x10/100/1000 Base-T Auto-sensing, auto-detection MDI/ MDI-X | LED: | POWER, PON, LOS, LAN |
Power Supply: | DC +12V 0.5A (feed via external AC/DC adapter) | Buttons: | ON/OFF, Reset |
Maximum Power Consumption: | 2.8W | Device Dimension: | 92*92*24mm (W*D*H) |
SOFTWARE SPECIFICATION
GPON: | ITU-T G.984.x and G.988 | L3: | ONT can works as Residential Gateway (Home Gateway Unit: HGU) and in Bridge (SFU) |
OMCI G.984.4 | PPPoE Client | ||
AES decryption | NAT and PAT | ||
Support for FEC (Forrward Error Correction) in both direction | DHCP Server/Client/Relay | ||
Dying Gasp / Power Off notification | IGMP Proxy | ||
Dynamic Bandwidth Allocation | VPN Pass-through | ||
Support for Multicast GEM | UPnP | ||
L2: | 802.1D Bridge | Port Forrwarding | |
VLAN 802.1Q with 802.1p CoS | IPv4/IPv6 | ||
IGMP Snooping v/1v2/v3 | Provisioning: | Easy to use provisioning for all services including PPPoE login, IPTV, Port Forrwarding, Logins etc | |
Jumbo Frame 2K on GPON WAN | DOCSIS like provisioning over GPON/EPON | ||
Rate-Limit (Traffic Limitation) | TR-069 | ||
Managment: | WEB | SNMP | |
Remote Syslog | OMCI | ||
OMCI | RestAPI / JSON |
GPON INTEROPERABILITY TEST REPORTS
ADTRAN | DZS | NOKIA (ALCATEL-LUCENT) | ZTE |
CISCO/ALTICE LAN | FIBERHOME | RAISECOM | ZYXEL |
CALIX | HUAWEI | ZHONE | |
We do our best to ensure interoperability works not matter of OLT software or hardware version. For details verification please check our knowledge base or contact with us on support@halny.com |
All specifications are subject to change without notice. The above product picture is a sample for reference and may vary. Please check with your supplier for exact offers.
Ordering Information
HL-1GE / HL-1GE-EU | HALNY GPON ONT 1-Port LAN 10/100/1000, B+ SC/APC, Router/Bridge, with European Power Adapter |
HL-1GE-US | HALNY GPON ONT 1-Port LAN 10/100/1000, B+ SC/APC, Router/Bridge, with North America Power Adapter |
HL-1GE-UK | HALNY GPON ONT 1-Port LAN 10/100/1000, B+ SC/APC, Router/Bridge, with United Kingdom Power Adapter |
HL-1GE-NOPS | HALNY GPON ONT 1-Port LAN 10/100/1000, B+ SC/APC, Router/Bridge, without Power Adapter |
HL-1GC / HL-1GC-EU | HALNY GPON ONT 1-Port LAN 10/100/1000, C+ SC/APC, Router/Bridge, with European Power Adapter |
HL-1GC-US | HALNY GPON ONT 1-Port LAN 10/100/1000, C+ SC/APC, Router/Bridge, with North America Power Adapter |
HL-1GC-UK | HALNY GPON ONT 1-Port LAN 10/100/1000, C+ SC/APC, Router/Bridge, with United Kingdom Power Adapter |
HL-1GC-NOPS | HALNY GPON ONT 1-Port LAN 10/100/1000, C+ SC/APC, Router/Bridge, without Power Adapter |
Please contact sales for detailed order information |
Leaflet
Download leaflet from below link:
Quick Installation guide
Declaration of confirmity
Please contact with Sales Team
Software
Download:
More Help
If you have any technical question please contact:
Email: support@halny.com