DHCP Option 60 and 82

Created On4 kwietnia 2022

Last Updated On29 października 2024

byMaciej K

Document Date and version	2022.04.04
Tested with ONT HALNy HL-1GE/2, HL-1GC, HL-4G, HL-4GMV	Supported on Version: V2.0.19 or above
Tested with ONT HALNy HL-4GQV, HL-4GQVS/2, HL-4GXV/-F, HL-4GMV2/3/4, HLE-3GM, HLE-3GX-F	Supported on Version: V3.0.13 or above
Tested with ONT HALNy HL-1B, HL-2BV, HL-4G2	Supported on Version: V4.0.3 or above
Tested with ONT HALNy HL-4BX3V-F, HL-4GX3VR	Supported on Version: V5.0.9 or above
Revision	1

Let us know how to improve below document on: support@halny.com

Default values

Since firmware version listed above, ONTs and routers supports DHCP option 60 and 82 on WAN interfaces, both from www interface and via XML provisioning.

NOTE: OPTION 60 is NOT supported in V2.X.X firmware series.

Default values:

option 60 – “dslforum.org”
option 82:
- CIRCUIT-ID – ONT_SN, for example: “HALN62030d50”
- REMOTE-ID – ONT_MODEL_NAME, for example: “HL-4GQVS2”

XML file:

<WAN>
	<WAN1>
		.
                .
                .
		<OPTION82_ENABLE>YES</OPTION82_ENABLE>
		<OPTION82_CIRCUIT_ID>OPTION_82_CIR</OPTION82_CIRCUIT_ID>
		<OPTION82_REMOTE_ID>OPTION_82_REM</OPTION82_REMOTE_ID>
		<OPTION60_ENABLE>YES</OPTION60_ENABLE>
		<OPTION60_VALUE>OPTION_60_VAL</OPTION60_VALUE>
       </WAN1>
</WAN>