HL-4G2
GPON ONT with 4 Gigabit LAN ports
PRODUCT DESCRIPTION
GPON Optical Network Termination products are designed for operators and service providers who seek advantage from the expanded capacity of a fiber access network.
HL-4G2 is a GPON ONT that acts as GPON Home Gateway Unit and is designed to provide affordable access to FTTH networks. The products use a single fiber to connect individual houses and businesses to the network for broadband services up to gigabit speeds.
All products within the GPON family comply with current ITU-T standards for gigabit passive optical networks (GPONs). The solution is designed to optimize the deployment and roll-out of the service provider. HL-4G2 design offer multi-interoperability with several OLT vendors. The ONT/ONU products are tested and have proven interoperability with most major GPON OLT Vendors.
HALNy HL-4G2 provides one GPON port (SC/APC type), four Gigabit Ethernet ports. All units have Layer 3 (HGU* / Router / NAT) and Layer 2 support.
HALNy specializes in cost-effective designs, and works closely with service providers to improve their business case through a comprehensive range of standard products, supporting the industry’s common demands. HALNy also provides custom designs and services to meet unique customer needs.
The network interface is compliant to ITU-T G.984.5 to provide 2.5 Gb/s downstream and 1.25 Gb/s upstream. LAN interface allow to provide Gigabit service.
*- fully supported in the future
HARDWARE SPECIFICATION
WAN Port: | GPON SC/APC B+ 2.488Gbps Downstream 1.244Gbps Upstream | Operating Temp: | 0 ~ 45 C |
GPON RX Input: | -10 ~ -27 dBm | Storage Temp: | -20 ~ 70 C |
GPON TX Output: | 0.5 ~ 5 dBm | Flash: | Hold two software sets, for active and backup ONT firmware |
LAN Ports: | 4x10/100/1000 Base-T Auto-sensing, auto-detection MDI/ MDI-X | LED: | POWER, PON, LOS, Internet, LAN1-4 |
Power Supply: | DC +12V 1A (feed via external AC/DC adapter) | Buttons: | ON/OFF, Reset |
Device Dimension: | 140*102*34mm (W*D*H) |
GENERAL PRODUCT FEATURE
GPON: | ITU-T G.984.x and G.988 | L3: | ONT can works as Residential Gateway (Home Gateway Unit: HGU*) and in Bridge (SFU) * - fully supported in the future |
OMCI G.984.4 | PPPoE Client | ||
AES decryption | NAT and PAT | ||
Support for FEC (Forrward Error Correction) in both direction | DHCP Server/Client/Relay | ||
Dying Gasp / Power Off notification | IGMP Proxy | ||
Dynamic Bandwidth Allocation | VPN Pass-through | ||
Support for Multicast GEM | UPnP | ||
L2: | 802.1D Bridge | Port Forrwarding | |
VLAN 802.1Q with 802.1p CoS | IPv4/IPv6 | ||
IGMP Snooping v/1v2/v3 | Provisioning: | Easy to use provisioning for all services including PPPoE login, IPTV, Port Forrwarding, Logins etc | |
Jumbo Frame 2K on GPON WAN | DOCSIS like provisioning over GPON/EPON | ||
Rate-Limit (Traffic Limitation) | TR-069 | ||
Managment: | WEB | SNMP | |
Remote Syslog | OMCI | ||
OMCI | RestAPI / JSON |
INTEROPERABILITY TEST REPORTS
ADTRAN | DZS | NOKIA (ALCATEL-LUCENT) | ZTE |
CISCO/ALTICE LAN | FIBERHOME | RAISECOM | ZYXEL |
CALIX | HUAWEI | ZHONE | |
We do our best to ensure interoperability works not matter of OLT software or hardware version. For details verification please check our knowledge base or contact with us on support@halny.com |
ALTERNATIVE This ONT can be used as alternative to below ONTs
Ordering Information
HL-4G2 / HL-4G2-EU | HALNY NETWORKS GPON ONT 4-PORT LAN 10/100/1000, B+ SC/APC, Router/Bridge, with European Power Adapter |
HL-4G2-US | HALNY NETWORKS GPON ONT 4-PORT LAN 10/100/1000, B+ SC/APC, Router/Bridge, with North America Power Adapter |
HL-4G2-UK | HALNY NETWORKS GPON ONT 4-PORT LAN 10/100/1000, B+ SC/APC, Router/Bridge, with United Kingdom Power Adapter |
HL-4G2-NOPS | HALNY NETWORKS GPON ONT 4-PORT LAN 10/100/1000, B+ SC/APC, Router/Bridge, without Power Adapter |
Please contact sales for detailed order information |
Leaflet
Download leaflet from below link:
Quick Installation guide
Declaration of conformity
Please contact with Sales Team
Software
Download
More Help
If you have any technical question please contact:
Email: support@halny.com