Restore factory defaults via OMCI
Document Date and version | 2021.02.02 |
Tested with ONT HALNy HL-4GQV, HL-4GQVS, HL-2GRV, HL-4GMV2, HL-4GMVR, HL-4GMV, HL-1GE, HL-4G, HL-1GR | Supported on Version: V3.0.12/V2.0.18 or above |
Revision | 1 |
Let us know how to improve below document on: support@halny.com |
Vendor | Command | Action |
Dasan | V5808(config-gpon-olt[1])# onu restore-factory reset ONU-ID | Restores ONT to factory defaults and restores to default GPON Serial Number |
ZTE | ZXAN(config)#pon-onu-mng gpon-onu_RACK/SLOT/PORT:ONU-ID ZXAN(gpon-onu-mng)# restore factory | Restores ONT to factory defaults and restores to default GPON Serial Number |
Zhone | Zhone# onu set2default SLOT/PORT/ONU-ID | Restores ONT to factory defaults and leaves changed GPON Serial Number |
Huawei | MA5683T(config-if-gpon-RACK/SLOT)#ont factory-setting-restore PORT ONU-ID | Restores ONT to factory defaults and restores to default GPON Serial Number |
Calix | Settings -> restore factory defaults | Restores ONT to factory defaults and leaves changed GPON Serial Number |
Zyxel | Zyxel# remote ont ont-PORT-ONU-ID onu-reset FW_SLOT | Restores ONT to factory defaults and restores to default GPON Serial Number |
FIBERHOME | Admin\onu# reset default_cfg slot SLOT pon PORT onu ONU-ID default_cfg 1 | Restores ONT to factory defaults and restores to default GPON Serial Number |
