HL-4GQVS / HL-4GQVS2 / HL-4GMV3 / HL-4GMV4 / HL-4GMVR / HL-4GXV / HL-4GXV-F Configuration [ZTE C6XX]

Service scenario

---

ONT configuration

Document Date and version	2024.04.29
Tested on OLT ZTE C610	Version: V1.2.2
Tested with ONT HALNy HL-4GXV-F	Supported on Version: V3.2.40p2 or above
Revision	1

This tutorial is based on ONT with firmware V3.2.40p2 and ZTE C610 running with firmware V1.2.2.

In example configuration we used below VLANs:
VLAN 100 – INTERNET
VLAN 200 – IPTV (multicast uplink port 1/1/6)
VLAN 300 – VOIP
VLAN 400 – MGMT 

1. Create DBA profile

(config)# gpon
  profile tcont MAX type 4 maximum 102400

2. Create ONT Type
Change HL-MODEL string to exact model name of the ONT, ex. onu-type HL-4GMV gpon …

(config)# pon
  onu-type HL-4GXV-F gpon max-tcont 4 max-gemport 32 max-iphost 4
  onu-type-if HL-4GXV-F eth_0/1
  onu-type-if HL-4GXV-F eth_0/2
  onu-type-if HL-4GXV-F eth_0/3
  onu-type-if HL-4GXV-F eth_0/4
  onu-type-if HL-4GXV-F pots_0/1

3. Register ONT on GPON

(config)# interface gpon-olt_1/3/3 
  onu 5 type HL-4GXV-F sn HALNA22B92B0

4. Configure ONT interface mode

(config)# interface gpon-onu_1/3/3:5 
  real-speed gpon
  vport-mode manual
  tcont 1 profile MAX
  tcont 2 profile MAX
  tcont 3 profile MAX
  tcont 4 profile MAX
  gemport 1 tcont 1
  gemport 2 tcont 2
  gemport 3 tcont 3
  gemport 4 tcont 4
  vport 1 map-type vlan
  vport 2 map-type vlan
  vport 3 map-type vlan
  vport 4 map-type vlan
  vport-map 1 1 vlan 100
  vport-map 2 2 vlan 200
  vport-map 3 3 vlan 300
  vport-map 4 4 vlan 400

5. Create igmp profile

onu profile igmp 200 down-tag strip

6. Create vlan-profile (for IP host 1)

onu profile vlan tag400 tag-mode tag cvlan 400

7. Configure ONT remote management mode

(config)# pon-onu-mng gpon-onu_1/3/3:5
  mvlan 200
  service 1 gemport 1 vlan 100
  service 2 gemport 2 vlan 200
  service 3 gemport 3 vlan 300
  service 4 gemport 4 vlan 400
  igmp eth_0/4 profile 200
  igmp eth_0/3 profile 200
  wan-ip ipv4 mode dhcp vlan-profile tag400 host 1

8. Configure vports.

interface vport-1/3/3.5:1
  service-port 1 user-vlan 100 vlan 100
$
interface vport-1/3/3.5:2
  service-port 2 user-vlan 200 vlan 200
  igmp fast-leave enable
  igmp version v2
$
interface vport-1/3/3.5:3
  service-port 3 user-vlan 300 vlan 300
$
interface vport-1/3/3.5:4
  service-port 4 user-vlan 400 vlan 400

9. Configure IGMP Snooping

(config)# igmp querygemport-mode both
(config)# igmp  mvlan 200
(config-igmp-mvlan-200)# source-port xxvgei-1/1/6
(config-igmp-mvlan-200)# receive-port gpon-onu_1/3/3.5:2
(config-igmp-mvlan-200)# host-version v2
(config-igmp-mvlan-200)# work-mode snooping

10. Verify ONT ip-host 1 IP address

#show gpon remote-onu ip-host gpon-onu_1/3/3:5
Host ID:            5
Host name:          IPHOST: WWW/XML/TR069
Identify:
IP addres:          0.0.0.0
Mask:               0.0.0.0
Gateway:            0.0.0.0
Primary DNS:        0.0.0.0
Second DNS:         0.0.0.0
DHCP enable:        disable
Ping response:      disable
Traceroute response:disable
MAC address:        54DB.A22B.92B0
Current IP address: 172.17.14.151
Current mask:       255.255.255.0
Current gateway:    172.17.14.1
Current primary DNS:8.8.8.8
Current second DNS: 8.8.4.4
Domain name:

ONT HL-4GQVS / HL-4GQVS2 / HL-4GMV3 / HL-4GMV4 / HL-4GMVR / HL-4GXV / HL-4GXV-F Provisioning on ZTE C610

There are two ways of ONT provisioning:

• DHCP option 66,67 (link)
• TR-069(link)

ONT HL-4GQVS / HL-4GQVS2 / HL-4GMV3 / HL-4GMV4 / HL-4GMVR / HL-4GXV / HL-4GXV-F Upgrade on ZTE C610

Upgrade procedure is the same as for other HALNy ONTs (link)