HALNy HL-4GMV Configuration [RAISECOM ISCOM 5508/6800]

Service scenario

---

ONT configuration

Document Date and version	2020.07.16
Tested on OLT RAISECOM ISCOM 5508	Version: 2.63.1_20190827
Tested with ONT HALNy HL-4GMV	Supported on Version: V2.0.12t or above
Revision	1

Let us know how to improve below document on: support@halny.com

Vendor support change

Connect PC to ONT eth LAN port and navigate to URL http://192.168.33.1/cgi-bin/vendor-support.asp. From drop-down menu select RAISECOM.

ONT is connected to the port 1/1

1.Create DBA profile:

create dba-profile 3 name DBA type3 assure 10240 max 1024000

2. Create gpon-onu-line profile

gpon-onu-line-profile 17
  mapping-mode port
  create tcont 1 dba-profile 3
  create tcont 2 dba-profile 3
  create gem 1 tcont 1
  commit
  gem 1 mapping 1 ip-host 1
  commit
  create gem 2 tcont 2
  commit
  gem 2 mapping 1 veip 1
  commit
  quit

3. Create gpon-onu-service-profile

gpon-onu-service-profile 17
  port-num veip 1
  iphost-num 1
  iphost 1 mode dhcp
  iphost 1 native vlan 110
  iphost 1 service management
  commit
  quit

4. Create ONT

create gpon-onu 1 sn HALN206D8538 line-profile-id 17 service-profile-id 17

5. Display ONT ip-host 1 address

GPON(config)#show gpon-onu 1/1/33 iphost
ONU ID: 1/1/1
Iphost ID : 1
Mode : dhcp
IP Type : ipv4
IP Address : 0.0.0.0
Mask : 0.0.0.0
Default-gw : 0.0.0.0
VLAN : 400
Priority : 0
Allowed vlan : n/a
Pri-dns : 0.0.0.0
Sec-dns : 0.0.0.0
Sec-dns : e05a.9f6d.8538
PPPoe Username :
PPPoe Password :
Current IPAddr : 10.20.30.134
Current Mask : 255.255.255.0
Current-gw : 10.20.30.1
Current Pri-dns : 0.0.0.0
Current Sec-dns : 0.0.0.0
IPv6LinkLocalAddr : ::
IPv6Addr : ::
IPv6DefaultRouter : ::
IPv6PrimaryDNS : ::
IPv6SecondaryDNS : ::
IPv6DUID :

ONT HL-4GMV Provisioning on RAISECOM ISCOM 5508/6800

There are three ways of ONT provisioning:

• DHCP option 66,67 (link)
• Upgrade ONT with tar.gz file where XML file is included – OMCI Firmware Upgrade provisioning (link)
• TR-069(link)

---