How Can We Help?
HL-4G SFU Configuration [ZYXEL]
HALNy HL-4G Configuration
Service Scenario
HL-4G can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
SFU mode allows to prepare different configurations – such as QiQ tunnel or VLAN translation on the ONT. In this tutorial we will focus on SFU mode configuration.
ONT modes switching HGU<->SFU
Switching between HGU and SFU modes is described here.
Document Date and version | 2020.12.28 |
Tested on ZYXEL OLT1404A | Version: V4.02(ABJB.3)C0_200904 |
Tested with ONT HALNy HL-4G | Supported on Version: V2.0.13 or above |
Revision | 1 |
Let us know how to improve below document on: support@halny.com |
Supported SFU service scenarios
1. ONT configuration (Access mode, only INTERNET)
ONT was connect to the GPON port 2 with ONU_ID 30
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-30
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD0C8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# ontWan 1
OLT1404A(config-ont-wan)# vlan 400
OLT1404A(config-ont-wan)# exit
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-30-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 100
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-30-1-2
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 100
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-30-1-3
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 100
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-30-1-4
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 100
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-30 ontWan-status
-------------------------------------------------------------------------------------------------------
Wan 1 : Enable
Connection Type : IPoE
Status : Down
Nat : Disable
Service :
Default Wan : Disable
Vlan : 400
Priority : 0
Auto get IP : Disable
IP address : 172.17.60.146
IP Mask : 255.255.254.0
Gateway : 172.17.60.1
Primary DNS : 172.16.16.240
Secondary DNS : 185.228.168.10
Binding lan port :
Binding wifi 2.4G ssid : N/A
Binding wifi 5G ssid : N/A
-------------------------------------------------------------------------------------------------------
2. ONT configuration (Access mode, only IPTV)
ONT was connect to the GPON port 2 with ONU_ID 31
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-31
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD0C8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# ontWan 1
OLT1404A(config-ont-wan)# vlan 400
OLT1404A(config-ont-wan)# exit
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-31-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 200 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 200
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-31-1-2
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 200 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 200
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-31-1-3
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 200 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 200
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-31-1-4
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 200 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 200
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-31 ontWan-status
-------------------------------------------------------------------------------------------------------
Wan 1 : Enable
Connection Type : IPoE
Status : Down
Nat : Disable
Service :
Default Wan : Disable
Vlan : 400
Priority : 0
Auto get IP : Disable
IP address : 172.17.60.146
IP Mask : 255.255.254.0
Gateway : 172.17.60.1
Primary DNS : 172.16.16.240
Secondary DNS : 185.228.168.10
Binding lan port :
Binding wifi 2.4G ssid : N/A
Binding wifi 5G ssid : N/A
-------------------------------------------------------------------------------------------------------
3. ONT configuration (TRANSPARENT mode)
ONT was connect to the GPON port 2 with ONU_ID 32
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-32
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD0C8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# ontWan 1
OLT1404A(config-ont-wan)# vlan 400
OLT1404A(config-ont-wan)# exit
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-32-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-32-1-2
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-32-1-3
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-32-1-4
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
*HL-4G suport to send transparently up to 10 vlans
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-32 ontWan-status
-------------------------------------------------------------------------------------------------------
Wan 1 : Enable
Connection Type : IPoE
Status : Down
Nat : Disable
Service :
Default Wan : Disable
Vlan : 400
Priority : 0
Auto get IP : Disable
IP address : 172.17.60.146
IP Mask : 255.255.254.0
Gateway : 172.17.60.1
Primary DNS : 172.16.16.240
Secondary DNS : 185.228.168.10
Binding lan port :
Binding wifi 2.4G ssid : N/A
Binding wifi 5G ssid : N/A
-------------------------------------------------------------------------------------------------------
4. ONT configuration (Access + TRANSPARENT mode)
ONT was connect to the GPON port 2 with ONU_ID 33
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-33
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD0C8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# ontWan 1
OLT1404A(config-ont-wan)# vlan 400
OLT1404A(config-ont-wan)# exit
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-33-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 100
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-33-1-2
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 200 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 200
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-33-1-3
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-33-1-4
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
*HL-4G suport to send transparently up to 10 vlans
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-33 ontWan-status
-------------------------------------------------------------------------------------------------------
Wan 1 : Enable
Connection Type : IPoE
Status : Down
Nat : Disable
Service :
Default Wan : Disable
Vlan : 400
Priority : 0
Auto get IP : Disable
IP address : 172.17.60.146
IP Mask : 255.255.254.0
Gateway : 172.17.60.1
Primary DNS : 172.16.16.240
Secondary DNS : 185.228.168.10
Binding lan port :
Binding wifi 2.4G ssid : N/A
Binding wifi 5G ssid : N/A
-------------------------------------------------------------------------------------------------------
5. ONT configuration (Hybrid mode)
ONT was connect to the GPON port 2 with ONU_ID 34
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-34
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD0C8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# ontWan 1
OLT1404A(config-ont-wan)# vlan 400
OLT1404A(config-ont-wan)# exit
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-34-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 200 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 200
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-34-1-2
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 200 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 200
OLT1404A(config-remote-veip-uniport)# igmpchannel 200 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-34-1-3
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 100
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-34-1-4
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 100 txtag untag ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# pvid 100
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
*HL-4G suport to send transparently up to 10 vlans
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-34 ontWan-status
-------------------------------------------------------------------------------------------------------
Wan 1 : Enable
Connection Type : IPoE
Status : Down
Nat : Disable
Service :
Default Wan : Disable
Vlan : 400
Priority : 0
Auto get IP : Disable
IP address : 172.17.60.146
IP Mask : 255.255.254.0
Gateway : 172.17.60.1
Primary DNS : 172.16.16.240
Secondary DNS : 185.228.168.10
Binding lan port :
Binding wifi 2.4G ssid : N/A
Binding wifi 5G ssid : N/A
-------------------------------------------------------------------------------------------------------
6. ONT configuration (VLAN translation – rBSA)
ONT was connect to the GPON port 2 with ONU_ID 35
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-35
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD0C8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# ontWan 1
OLT1404A(config-ont-wan)# vlan 400
OLT1404A(config-ont-wan)# exit
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-35-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 35 network 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 838 network 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 839 network 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 838 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-35-1-2
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 35 network 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 838 network 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 839 network 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 838 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-35-1-3
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 35 network 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 838 network 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 839 network 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 838 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-35-1-4
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 35 network 100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 838 network 200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 839 network 300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# igmpchannel 838 txtag transparent
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-35 ontWan-status
-------------------------------------------------------------------------------------------------------
Wan 1 : Enable
Connection Type : IPoE
Status : Down
Nat : Disable
Service :
Default Wan : Disable
Vlan : 400
Priority : 0
Auto get IP : Disable
IP address : 172.17.60.146
IP Mask : 255.255.254.0
Gateway : 172.17.60.1
Primary DNS : 172.16.16.240
Secondary DNS : 185.228.168.10
Binding lan port :
Binding wifi 2.4G ssid : N/A
Binding wifi 5G ssid : N/A
-------------------------------------------------------------------------------------------------------
7. ONT configuration (802.1q in 802.1q Begin/End of Tunnel)
ONT was connect to the GPON port 2 with ONU_ID 36
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-36
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD0C8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# ontWan 1
OLT1404A(config-ont-wan)# vlan 400
OLT1404A(config-ont-wan)# exit
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-36-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan all network 999:all ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-36-1-2
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan all network 999:all ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-36-1-3
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan all network 999:all ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-36-1-4
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan all network 999:all ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-36 ontWan-status
-------------------------------------------------------------------------------------------------------
Wan 1 : Enable
Connection Type : IPoE
Status : Down
Nat : Disable
Service :
Default Wan : Disable
Vlan : 400
Priority : 0
Auto get IP : Disable
IP address : 172.17.60.146
IP Mask : 255.255.254.0
Gateway : 172.17.60.1
Primary DNS : 172.16.16.240
Secondary DNS : 185.228.168.10
Binding lan port :
Binding wifi 2.4G ssid : N/A
Binding wifi 5G ssid : N/A
-------------------------------------------------------------------------------------------------------
8. ONT configuration (OSE / MdO)
ONT was connect to the GPON port 2 with ONU_ID 37
1. Create DBA-profile
OLT1404A(config)# qos bwprof 1G ustype 4 sir 0 air 0 pir 1024000
2. Authorize ONT – set correct serial number and password (register method A)
OLT1404A(config)# remote ont ont-2-37
OLT1404A(config-ont)# inactive
OLT1404A(config-ont)# sn 48414C4E206FD0C8
OLT1404A(config-ont)# password 00000001
OLT1404A(config-ont)# bwgroup 1 usbwprofname 1G dsbwprofname 1G
OLT1404A(config-ont)# ontWan 1
OLT1404A(config-ont-wan)# vlan 400
OLT1404A(config-ont-wan)# exit
OLT1404A(config-ont)# no inactive
3. Set uniport configuration
OLT1404A(config)# remote uniport uniport-2-37-1-1
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 10 network 999:100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 11 network 999:200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 12 network 999:300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-37-1-2
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 10 network 999:100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 11 network 999:200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 12 network 999:300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-37-1-3
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 10 network 999:100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 11 network 999:200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 12 network 999:300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
OLT1404A(config)# remote uniport uniport-2-37-1-4
OLT1404A(config-remote-veip-uniport)# queue tc 1 priority 0 weight 0 usbwprofname 1G dsbwprofname 1G dsoption olt bwsharegroupid 1
OLT1404A(config-remote-veip-uniport)# vlan 10 network 999:100 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 11 network 999:200 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# vlan 12 network 999:300 ingprof DEFVAL
OLT1404A(config-remote-veip-uniport)# no inactive
OLT1404A(config-remote-veip-uniport)# exit
4. Verify ONT ip-host 1 address
OLT1404A# show remote ont ont-2-37 ontWan-status
-------------------------------------------------------------------------------------------------------
Wan 1 : Enable
Connection Type : IPoE
Status : Down
Nat : Disable
Service :
Default Wan : Disable
Vlan : 400
Priority : 0
Auto get IP : Disable
IP address : 172.17.60.146
IP Mask : 255.255.254.0
Gateway : 172.17.60.1
Primary DNS : 172.16.16.240
Secondary DNS : 185.228.168.10
Binding lan port :
Binding wifi 2.4G ssid : N/A
Binding wifi 5G ssid : N/A
-------------------------------------------------------------------------------------------------------
ONT HL-4G SFU upgrade on ZYXEL OLT1404A/OLT1408A
HL-4G can be upgrade the same way as other HALNy ONTs, You can find upgrade procedure here.