HL-1GE SFU Configuration [FIBERHOME]

Service scenario

HL-1GE can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
In this tutorial we will focus on SFU mode configuration.

ONT modes switching HGU<->SFU

ONT will automatically switch between HGU and SFU modes but You need to:
– ONT power reboot,
– disable/enable ONT on port via command: Admin\onu# set pon_onoff slot 1 pon 2 onu 10 status on/off
– delete ONT from port and add with new configuration.

Document Date and version	2020.07.30
Tested on OLT FIBERHOME AN5516-04	Version: RP1000
Tested with ONT HALNy HL-1GE	Supported on Version: V2.0.13 or above
Revision	1

Let us know how to improve below document on: support@halny.com

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

ONT was connect to the GPON port 2 with ONU_ID 10.

1. Register ONT on GPON port.

Admin\onu# set whitelist phy_addr address HALN086047b8 password null action add slot 1 pon 2 onu 10 type 5506-01-A1

2. Create ip-host 1 configuration (VLAN 400).

Admin\onu\lan#set veip_mgr_par slot 1 pon 2 onu 10 veip_port 1 port_type veip mgr_channel enable model tr069 item 1
Admin\onu\lan# set veip_mgr_vlan slot 1 pon 2 onu 10 veip_port 1 mgr_id 1 name IPHOST tag_type tag cvlan_label 0x8100 cvlanid 400 cvlan_cos 0
Admin\onu\lan# apply veip_mgr_vlan slot 1 pon 2 onu 10

3. Add VLAN configuration.

Admin\onu\lan# set epon slot 1 pon 2 onu 10 port 1 service number 1
Admin\onu\lan# set epon slot 1 pon 2 onu 10 port 1 service 1 vlan_mode tag 0 0x8100 100
Admin\onu\lan# set epon slot 1 pon 2 onu 10 port 1 service 1 pvlan 0 100
Admin\onu\lan# set epon slot 1 pon 2 onu 10 port 1 service 1 type unicast
Admin\onu\lan# apply onu 1 2 10 vlan

4. Check services added to ONT.

Admin\onu\lan# show onufe_service slot 1 pon 8 onu 13

NO.  SL/LI/ONU PORT ID TYPE  MODE CVID COS  TPID  TVID COS  TPID  SVID COS  TPID PVID COS DATATYPE PRIQUE GEMPORT
1    1 /8 /13  1    1  unica tag  100  0    0     null null null  null null null  null 100  default default default

2. ONT configuration (Access mode, only IPTV)

ONT was connect to the GPON port 2 with ONU_ID 11.

1. Register ONT on GPON port.

Admin\onu# set whitelist phy_addr address HALN086047b8 password null action add slot 1 pon 2 onu 11 type 5506-01-A1

2. Create ip-host 1 configuration (VLAN 400).

Admin\onu\lan# set veip_mgr_par slot 1 pon 2 onu 11 veip_port 1 port_type veip mgr_channel enable model tr069 item 1
Admin\onu\lan# set veip_mgr_vlan slot 1 pon 2 onu 11 veip_port 1 mgr_id 1 name IPHOST tag_type tag cvlan_label 0x8100 cvlanid 400 cvlan_cos 0
Admin\onu\lan# apply veip_mgr_vlan slot 1 pon 2 onu 11

3. Add VLAN configuration.

Admin\onu\lan# set epon slot 1 pon 2 onu 11 port 1 service number 1
Admin\onu\lan# set epon slot 1 pon 2 onu 11 port 1 service 1 vlan_mode tag 5 0x8100 200
Admin\onu\lan# set epon slot 1 pon 2 onu 11 port 1 service 1 pvlan 5 200
Admin\onu\lan# set epon slot 1 pon 2 onu 11 port 1 service 1 type multicast
Admin\onu\lan# apply onu 1 2 11 vlan

4. Check services added to ONT.

Admin\onu# show onu service-info slot 1 pon 2 onu 11
FE service info :

NO.  SL/LI/ONU PORT ID TYPE  MODE CVID COS  TPID  TVID COS  TPID  SVID COS  TPID PVID COS DATATYPE PRIQUE GEMPORT
1    1 /2 /11  1    1  multi tag  200  5    33024     null null null  null null null  5    200  default default default

3. ONT configuration (TRANSPARENT mode)

ONT was connect to the GPON port 2 with ONU_ID 12.

1. Register ONT on GPON port.

Admin\onu# set whitelist phy_addr address HALN086047b8 password null action add slot 1 pon 2 onu 12 type 5506-01-A1

2. Create ip-host 1 configuration (VLAN 400).

Admin\onu\lan# set veip_mgr_par slot 1 pon 2 onu 12 veip_port 1 port_type veip mgr_channel enable model tr069 item 1
Admin\onu\lan# set veip_mgr_vlan slot 1 pon 2 onu 12 veip_port 1 mgr_id 1 name IPHOST tag_type tag cvlan_label 0x8100 cvlanid 400 cvlan_cos 0
Admin\onu\lan# apply veip_mgr_vlan slot 1 pon 2 onu 12

3. Add VLAN configuration.

Admin\onu\lan# set epon slot 1 pon 2 onu 12 port 1 service number 3
Admin\onu\lan# set epon slot 1 pon 2 onu 12 port 1 service 1 vlan_mode transparent 0 0x8100 100
Admin\onu\lan# set epon slot 1 pon 2 onu 12 port 1 service 1 type unicast
Admin\onu\lan# set epon slot 1 pon 2 onu 12 port 1 service 2 vlan_mode transparent 0 0x8100 200
Admin\onu\lan# set epon slot 1 pon 2 onu 12 port 1 service 2 type multicast
Admin\onu\lan# set epon slot 1 pon 2 onu 12 port 1 service 3 vlan_mode transparent 0 0x8100 300
Admin\onu\lan# set epon slot 1 pon 2 onu 12 port 1 service 3 type unicast
Admin\onu\lan# apply onu 1 2 12 vlan

4. Check services added to ONT.

Admin\onu\lan# show onufe_service slot 1 pon 2 onu 12

NO.  SL/LI/ONU PORT ID TYPE  MODE CVID COS  TPID  TVID COS  TPID  SVID COS  TPID PVID COS DATATYPE PRIQUE GEMPORT
1    1 /2 /12  1    1  unica tran 100  0    0     null null null  null null null  null null default default default
2    1 /2 /12  1    2  multi tran 200  0    0     null null null  null null null  null null default default default
3    1 /2 /12  1    3  unica tran 300  0    0     null null null  null null null  null null default default default

---