[CALIX] E7-2 OLT Integration with HALNy SFU 2 LAN

Created On14 July 2025

Last Updated On30 September 2025

byAdrian Puk

HALNy Integration

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

1. Create ONT profile on OLT (CALIX OLT: ONTs > PROFILES > ONT PROFILE > PROFILES > CREATE)

    - NAME should be set as ONTMODEL_CXNK (e.g HL-2BV_CXNK) 
    - VENDOR should be set as CXNK 
    - MODEL should be set as ONTMODEL (e.g HL-2BV) 
    - Profile should have ONT physical ports count defined (VOICE, GIG ETH, RF VIDEO) 
    - ETH OAM CAPABLE should be "N" 
    - CONVERT MULTICAST CAPABLE should be "N"  
    - RESIDENTIAL GATEWAY should be "1"  
    - FULL BRIDGE should be "1"
    - DEFAULT TO RG MODE should be disabled

View ONT port table

2. Add ONT to GPON port (ONTs > DISCOVERED ONTS > Link to new Provisioning)

Set below values. Choose between “System assigned ID” or “User Assigned ID” 
ONT ID: UNUSED ID 
ONT PROFILE: PREVIOUSLY CREATED ONT PROFILE

3. Create DBA profile (E7 > PROFILES > SERVICE > ETHERNET BANDWIDTH > PROFILES > CREATE)

Set Name and Upstream Rate, click create and check if DBA has been created (REFRESH)

4. Add mach-list for VLAN 100 ACCESS (Internet service) (E7 > PROFILES > SERVICE > TAGGING > MATCH LISTS > PROFILES > CREATE

Set Match List name

Double-click on newly created match-list (ADD_VLAN_100) and add new Unagged Match Rule

Leave all values default

5. Create VLAN TAGGING ACTION for VLAN 100 ACCESS (Internet service) (E7 > PROFILES > SERVICE > TAGGING > TAG ACTIONS > PROFILES > CREATE)

Fill all necessary fields, and click CREATE

6. Access configuration Data Service (Internet) (E7 > SHELF > CARD > GPON > ONT > SERVICES > TABLE> CREATE > DATA SERVICE)

Select Subscriber Port, Service Name, BW Profile and Service Tag Action from drop-down menu

Do the same for second ETH port.

Attention : If ONT has been working in TRANSPARENT mode, after setup to ACCESS mode You may need to disable/enable Data Service or reboot ONT.

2. ONT configuration (Access mode, Internet+IPTV)

Create ONT profile on OLT (CALIX OLT: ONTs > PROFILES > ONT PROFILE > PROFILES > CREATE)

    - NAME should be set as ONTMODEL_CXNK (e.g HL-2BV_CXNK) 
    - VENDOR should be set as CXNK 
    - MODEL should be set as ONTMODEL (e.g HL-2BV)
    - Profile should have ONT physical ports count defined (VOICE, GIG ETH, RF VIDEO) 
    - ETH OAM CAPABLE should be "N" 
    - CONVERT MULTICAST CAPABLE should be "N"  
    - RESIDENTIAL GATEWAY should be "1"  
    - FULL BRIDGE should be "1"
    - DEFAULT TO RG MODE should be disabled

View ONT port table

2. Add ONT to GPON port (ONTs > DISCOVERED ONTS > Link to new Provisioning)

Set below values. Choose between “System assigned ID” or “User Assigned ID” 
ONT ID: UNUSED ID 
ONT PROFILE: PREVIOUSLY CREATED ONT PROFILE

3. Create DBA profile (E7 > PROFILES > SERVICE > ETHERNET BANDWIDTH > PROFILES > CREATE)

Set Name and Upstream Rate, click create and check if DBA has been created (REFRESH)

4. Add mach-list for VLAN 100 ACCESS (Internet service) (E7 > PROFILES > SERVICE > TAGGING > MATCH LISTS > PROFILES > CREATE

Set Match List name

Double-click on newly created match-list (ADD_VLAN_100) and add new Unagged Match Rule

Leave all values default

5. Create VLAN TAGGING ACTION for VLAN 100 ACCESS (Internet service) (E7 > PROFILES > SERVICE > TAGGING > TAG ACTIONS > PROFILES > CREATE)

Fill all necessary fields, and click CREATE

6. Create multicast profile for IPTV services (E7 > PROFILES > SERVICE > MULTICAST > MULTICAST > PROFILES > CREATE)

Fill Name and click CREATE

7. Add mach-list for VLAN 200 ACCESS (IPTV service) (E7 > PROFILES > SERVICE > TAGGING > MATCH LISTS > PROFILES > CREATE)

Set Match List name

Double-click on newly created match-list (ADD_VLAN_200) and add new Unagged Match Rule

Leave all values default

8. Create VLAN TAGGING ACTION for VLAN 200 ACCESS (IPTV service)

E7 > PROFILES > SERVICE > TAGGING > TAG ACTIONS > PROFILES > CREATE

Fill all necessary fields, and click CREATE

9. Access configuration Data Service (Internet) (E7 > SHELF > CARD > GPON > ONT > SERVICES > TABLE> CREATE > DATA SERVICE)

Select Subscriber Port, Service Name, BW Profile and Service Tag Action from drop-down menu

10. Access configuration Video Service (IPTV)

E7 > SHELF > CARD > GPON > ONT > SERVICES > TABLE> CREATE > VIDEO SERVICE

Select Subscriber Port, Service Name, BW Profile and Service Tag Action from drop-down menu

Attention: If ONT has been working in TRANSPARENT mode, after setup to ACCESS mode You may need to disable/enable Data Service or reboot ONT.

3. ONT configuration (Access mode, Internet+IPTV+VoIP)

1. Create ONT profile on OLT (CALIX OLT: ONTs > PROFILES > ONT PROFILE > PROFILES > CREATE)

    - NAME should be set as ONTMODEL_CXNK (e.g HL-2BV_CXNK) 
    - VENDOR should be set as CXNK 
    - MODEL should be set as ONTMODEL (e.g HL-2BV)
    - Profile should have ONT physical ports count defined (VOICE, GIG ETH, RF VIDEO) 
    - ETH OAM CAPABLE should be "N" 
    - CONVERT MULTICAST CAPABLE should be "N"  
    - RESIDENTIAL GATEWAY should be "1"  
    - FULL BRIDGE should be "1"
    - DEFAULT TO RG MODE should be disabled

View ONT port table

2. Add ONT to GPON port (ONTs > DISCOVERED ONTS > Link to new Provisioning)

Set below values. Choose between “System assigned ID” or “User Assigned ID” 
ONT ID: UNUSED ID 
ONT PROFILE: PREVIOUSLY CREATED ONT PROFILE

4. Create DBA profile (E7 > PROFILES > SERVICE > ETHERNET BANDWIDTH > PROFILES > CREATE)

Set Name and Upstream Rate, click create and check if DBA has been created (REFRESH)

4. Add mach-list for VLAN 100 ACCESS (Internet service) (E7 > PROFILES > SERVICE > TAGGING > MATCH LISTS > PROFILES > CREATE

Set Match List name

Double-click on newly created match-list (ADD_VLAN_100) and add new Unagged Match Rule

Leave all values default

5. Create VLAN TAGGING ACTION for VLAN 100 ACCESS (Internet service) (E7 > PROFILES > SERVICE > TAGGING > TAG ACTIONS > PROFILES > CREATE)

Fill all necessary fields, and click CREATE

6. Create multicast profile for IPTV services (E7 > PROFILES > SERVICE > MULTICAST > MULTICAST > PROFILES > CREATE)

Fill Name and click CREATE

7. Add mach-list for VLAN 200 ACCESS (IPTV service) (E7 > PROFILES > SERVICE > TAGGING > MATCH LISTS > PROFILES > CREATE)

Set Match List name

Double-click on newly created match-list (ADD_VLAN_200) and add new Unagged Match Rule

Leave all values default

8. Create VLAN TAGGING ACTION for VLAN 200 ACCESS (IPTV service)

E7 > PROFILES > SERVICE > TAGGING > TAG ACTIONS > PROFILES > CREATE

Fill all necessary fields, and click CREATE

9. Add mach-list for VLAN 300 ACCESS (VoIP service) (E7 > PROFILES > SERVICE > TAGGING > MATCH LISTS > PROFILES > CREATE)

Set Match List name

Double-click on newly created match-list (ADD_VLAN_300) and add new Unagged Match Rule

Leave all values defaultLeave all values default

10. Create VLAN TAGGING ACTION for VLAN 300 ACCESS (VoIP service)

E7 > PROFILES > SERVICE > TAGGING > TAG ACTIONS > PROFILES > CREATE

Fill all necessary fields, and click CREATE

11. Configure Voip Profile (E7 > PROFILES > SERVICE > SIP GW > PROFILES > CREATE)

Leave all values as default (profile NAME and PORT can be changed according to your preferences)

12. Access configuration Data Service (Internet) (E7 > SHELF > CARD > GPON > ONT > SERVICES > TABLE> CREATE > DATA SERVICE)

Select Subscriber Port, Service Name, BW Profile and Service Tag Action from drop-down menu

13. Access configuration Video Service (IPTV)

E7 > SHELF > CARD > GPON > ONT > SERVICES > TABLE> CREATE > VIDEO SERVICE

Select Subscriber Port, Service Name, BW Profile and Service Tag Action from drop-down menu

14. Access configuration SIP Service (VoIP)

E7 > SHELF > CARD > GPON > ONT > SERVICES > TABLE> CREATE > SIP SERVICE

Select Subscriber Port, SIP Profile, SIP server URI, username, password, Dial Plan, host protocol from drop-down menu

4. ONT configuration (TRANSPARENT mode, Internet+IPTV+VoIP)

1. Create ONT profile on OLT (CALIX OLT: ONTs > PROFILES > ONT PROFILE > PROFILES > CREATE)

    - NAME should be set as ONTMODEL_CXNK (e.g HL-2BV_CXNK) 
    - VENDOR should be set as CXNK 
    - MODEL should be set as ONTMODEL (e.g HL-2BV)
    - Profile should have ONT physical ports count defined (VOICE, GIG ETH, RF VIDEO) 
    - ETH OAM CAPABLE should be "N" 
    - CONVERT MULTICAST CAPABLE should be "N"  
    - RESIDENTIAL SERVICE should be "Y"  
    - FULL BRIDGE should be "Y„ 
    - DEFAULT TO RG MODE can be "Y" or "N"

View ONT port table

2. Add ONT to GPON port (ONTs > DISCOVERED ONTS > Link to new Provisioning)

Set below values. Choose between “System assigned ID” or “User Assigned ID” 
ONT ID: UNUSED ID 
ONT PROFILE: PREVIOUSLY CREATED ONT PROFILE

3. Create DBA profile (E7 > PROFILES > SERVICE > ETHERNET BANDWIDTH > PROFILES > CREATE)

Set Name and Upstream Rate, click create and check if DBA has been created (REFRESH)

4. Add mach-list for VLAN 100 TRANSPARENT(Internet service)

E7 > PROFILES > SERVICE > TAGGING > MATCH LISTS > PROFILES > CREATE

Set Match List name

Double-click on newly created match-list (VLAN_100) and add new Tagged Match Rule

Set S-VLAN ID to 100

5. Create VLAN TAGGING ACTION for VLAN 100 TRANSPARENT (Internet service) (E7 > PROFILES > SERVICE > TAGGING > TAG ACTIONS > PROFILES > CREATE)

Fill all necessary fields, and click CREATE

6. Add mach-list for VLAN 200 TRANSPARENT (IPTV service)

E7 > PROFILES > SERVICE > TAGGING > MATCH LISTS > PROFILES > CREATE

Set Match List name

Double-click on newly created match-list (VLAN_200) and add new Tagged Match Rule

Set S-VLAN ID to 200

7. Create VLAN TAGGING ACTION for VLAN 200 TRANSPARENT (IPTV service)

E7 > PROFILES > SERVICE > TAGGING > TAG ACTIONS > PROFILES > CREATE

Fill all necessary fields, and click CREATE

8. Add mach-list for VLAN 300 TRANSPARENT (VoIP service)

E7 > PROFILES > SERVICE > TAGGING > MATCH LISTS > PROFILES > CREATE

Set Match List name

Double-click on newly created match-list (VLAN_200) and add new Tagged Match Rule

Set S-VLAN ID to 300

9. Create VLAN TAGGING ACTION for VLAN 300 TRANSPARENT (VoIP service)

E7 > PROFILES > SERVICE > TAGGING > TAG ACTIONS > PROFILES > CREATE

Fill all necessary fields, and click CREATE

10. TRANSPARENT configuration (Internet)

E7 > SHELF > CARD > GPON > ONT > SERVICES > TABLE> CREATE > DATA SERVICE

Select Subscriber Port, Service Name, BW Profile and Service Tag Action from drop-down menu

11. Transparent configuration Video Service (IPTV)

E7 > SHELF > CARD > GPON > ONT > SERVICES > TABLE> CREATE > VIDEO SERVICE

Select Subscriber Port, Service Name, BW Profile and Service Tag Action from drop-down menu

12. Transparent configuration Data Service (VoIP Service)

E7 > SHELF > CARD > GPON > ONT > SERVICES > TABLE> CREATE > DATA SERVICE

Select Subscriber Port, Service Name, BW Profile and Service Tag Action from drop-down menu.

Attention: If ONT has been working in ACCESS mode, after setup to TRANSPARENT mode You may need to disable/enable Data Service or reboot ONT.

HALNy ONTs support transparent forwarding of up to 10 VLANs.

ONT Managment

Note: Most provisioning and upgrade options below require ONT to have a valid IP Host setup. For detailed information regarding IP Host click here.

Method	Configuration	Upgrade
Rest API V2	–	–
XML Provisioning	–	–
OTT	–	–
OLT CLI	–	[Example]
TR-069 [OLT CLI]	[Example]	[Example]
WEB	–	[Example]

Found something we can improve? Let us know at support@halny.com

Tags:


GPON ONTs
Model	LAN ports	VoIP FXS POTS port	RF/CATV overlay
HL-GSFP	1 x SFP 1GbE/2.5GbE	-	-
HL-1G	1×10/100/1000	-	-
HL-1GE	1×10/100/1000	-	-
HL-1GE2	1×10/100/1000	-	-
HL-1GC	1×10/100/1000	-	-
HL-1GR	1×10/100/1000	-	1
HL-1B	1×100/1000/2500	-
HL-2GRV	2×10/100/1000	1	1
HL-2BV	1×1000/2500 1×10/100/1000	1	-
HL-4G	4×10/100/1000	-	-
HL-4G2	4×10/100/1000	-	-
HL-4GV	4×10/100/1000	1	-
HL-4GMV	4×10/100/1000	2	-
HL-4GMV2	4×10/100/1000	2	-
HL-4GMV3	4×10/100/1000	1	-
HL-4GMV4	4×10/100/1000	1	-
HL-4GMVR	4×10/100/1000	1	1
HL-4GQV	4×10/100/1000	2	-
HL-4GQVS	4×10/100/1000	1	-
HL-4GQVS2	4×10/100/1000	1	-
HL-4GXV	4×10/100/1000	1	-
HL-4GXV-F	4×10/100/1000	1	-
HL-4GXVU-F	4×10/100/1000	1	-
HL-4BX3V-F	3×10/100/1000 1×2500	1	-
HL-4GX3VR	4×10/100/1000	1	1
XGSPON ONTs
Model	LAN ports	VoIP FXS POTS port	RF/CATV overlay
HLX-SFPX	1x SFP+ 1GbE/2.5GbE/10GbE	-	-
HLX-1TL	1×1000/2500/10000	-	-
HLX-1TLV	1×1000/2500/10000	1	-
HLX-TGV	1×1000/2500/5000/10000 1×10/100/1000	2	-


Model	WAN ports	LAN ports	WiFi	WiFi speed	Antennas	VoIP	Sales Status
Ethernet Routers
HLE-3GX-F	1×10/100/1000	3×10/100/1000	2T2R WiFi6	1800AX	Internal	-	In daily sales
HLE-4BX3V-F	1×100/1000/2500 Ethernet	3×10/100/1000 + 1×2500	2T2R WiFi6	WiFi6 AX3000	Internal	1xFXS	Coming soon!
Active Ethernet (SFP WAN)
HLS-4BX3V-F	1×1000/2500 SFP port	3×10/100/1000 + 1×2500	2T2R WiFi6	WiFi6 AX3000	Internal	1xFXS	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	-	In daily sales


Model Name	Mode	LAN	VoIP	WiFi	Mode button	Sales Status
HLX-SFPX	SFU (Bridge only)	1x1000/10000	-	-	-	New one! In daily sales
HLX-1TL	SFU (Bridge only)	1x1000/2500/10000	-	-	-	Coming soon! Q1-25
HLX-1TLV	SFU (Bridge only)	1x1000/2500/10000	1	-	-	New one! In daily sales
HLX-TGV	SFU (bridge) HGU (router NAT)	1x1000/2500/10000 1x10/100/1000	2	-	-	In daily sales
HLX-4BYV-F	HGU (router NAT)	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Triband 2.4/5/6GHz	Yes	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	In daily sales


Model	LAN ports	VoIP FXS POTS port	WiFi	WiFi antennas grain and type	WiFi speed	RF/CATV overlay	EtherWAN (LAN4 as Wan port)	USB port	SALES STATUS
HL-GSFP	SFP 1GbE/2.5GbE	-	-	-	-	-	-	-	End of Sale
HL-1GE	1×10/100/1000	-	-	-	-	-	-	-	In daily sales
HL-1GC	1×10/100/1000	-	-	-	-	-	-	-	In daily sales
HL-1B	1×100/1000/2500	-	-	-	-	-	-	-	New one! In daily sales
HL-1PD	1×10/100/1000 PoE PD	-	-	-	-	-	-	-	Coming soon!
HL-4G2	4×10/100/1000	-	-	-	-	-	-	-	New one! In daily sales
HL-1GR	1×10/100/1000	-	-	-	-	1	-	-	In daily sales
HL-2BV	1×1000/2500 1×10/100/1000	1	-	-	-	-	-	-	In daily sales
HL-4GV-F	4×10/100/1000	2	-	-	-	-	-	-	Coming soon!
HL-4GMV2	4×10/100/1000	2	2T2R 802.11n 2T2R 802.11ac wave2	2x5dB (external)	866Mbps 5Ghz 300Mbps 2.4Ghz	-	YES	-	In daily sales
HL-4GMVR	4×10/100/1000	1	2T2R 802.11n 2T2R 802.11ac wave2	4x5dB (external)	866Mbps 5Ghz 300Mbps 2.4Ghz	1	YES	-	End of Sale Replaced by HL-4GX3VR
HL-4GX3VR	4×10/100/1000	1	2T2R AX3000 WiFi6	4x5dB (external)	3000Mbps for 2.4Ghz / 5Ghz	1	YES	-	New one! In daily sales
HL-4GXV-F	4×10/100/1000	1	802.11ax 1800AX WiFi6	2x2 internal	1800Mbs for 2.4Ghz / 5Ghz	-	YES	-	End of Sale Replaced by HL-4BX3V-F
HL-4GXVU-F	4×10/100/1000	1	802.11ax 1800AX WiFi6	2x2 internal	1800Mbs for 2.4Ghz / 5Ghz	-	YES	1	New one! In daily sales
HL-4BX3V-F	3×10/100/1000 1×2500	1	2T3R AX3000 WiFi6	2x3 Internal	3000Mbs for 2.4Ghz / 5Ghz	-	YES	-	New one! In daily sales
HL-4BY3V-F	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Dual-Band 2.4Ghz/5Ghz	Internal	BE3600	-	YES	-	Coming soon!
HL-4BY7V-F	1x100/1000/2500 3x10/100/1000	1	WIFI 7 Dual-Band 2.4Ghz/5Ghz 4x4	Internal	BE7200	-	YES	-	Coming soon!
Fiber Tray for ONT based on CUBE housing
HL-FIBER-TRAY	-	-	-	-	-	-	-	-	In daily sales

Have a Question?

[CALIX] E7-2 OLT Integration with HALNy SFU 2 LAN

Supported SFU service scenarios

1. ONT configuration (Access mode, only INTERNET)

2. ONT configuration (Access mode, Internet+IPTV)

3. ONT configuration (Access mode, Internet+IPTV+VoIP)

4. ONT configuration (TRANSPARENT mode, Internet+IPTV+VoIP)

ONT Managment