Posted by on | Featured

Have a Question?

ONT upgrade with TR-069

Created On
Last Updated On
byAdrian Puk
You are here:
< All Topics
Document Date and version2020.05.18
Tested on OLTrequired OLT with IP-host support
Tested with ONT HALNy HL-1GE/2, HL-1GC, HL-1GR, HL-4G, HL-4GMVSupported on version V2.0.10 or above
Tested with ONT HALNy HL-1B, HL-2BV, HL-4G2Supported on version V4.0.4 or above
Tested with ONT HALNy HL-4GMV2/3/4, HL-4GQV / HL-4GQVS / HL-4GQVS2, HL-4GXV / HL-4GXV-FSupported on Version: V3.0.3 or above
Tested with ONT HALNy HL-4BX3V-F, HL-4GX3VRSupported on Version: V5.0.9 or above
Revision1

TR-069 upgrade guide for HALNy devices

This article provides a step-by-step guide to upgrading the software on your HALNy device using the TR-069 (CWMP) protocol, with a focus on example configurations in GenieACS.

1. Configure TR-069(CWMP) on your HALNy device

  • Log in using your administrative credentials.
  • Navigate to CWMP settings – in the main menu, locate and click on “Internet” then “CWMP” settings.
  • Set “State” to “Enable”.
  • Enter the ACS server details.
  • Save the settings.

2. Upload the software image to the ACS server

  • Log in to the ACS.
  • Navigate to Admin -> Files.
  • Click new to upload a new firmware file.
  • Fill in the details – only type and file are obligatory options.
  • Type: Select Firmware Upgrade Image.
  • OUI: (Optional) Enter the ONT’s OUI (e.g., 5ADBA2).
  • Product Class: (Optional) Enter Halny model-name (e.g. HL-4G2).
  • Version: (Optional) Enter the firmware version (e.g. V4.0.10).
  • Click Browse and select the firmware file.
  • Click Save to upload the file.

3. Schedule firmware upgrade

  • Go to devices and locate your ONT.
  • Click push file and select the new firmware file.
  • Confirm the action and wait for the upgrade to begin.
Found something we can improve? Let us know at support@halny.com
Table of Contents
Comments are closed.