HL-2GRV
GPON ONT 2 Gigabit LAN, VoIP and RF port for CATV/DVB overlay
PRODUCT DESCRIPTION
GPON Optical Network Termination products are designed for operators and service providers who seek advantage from the expanded capacity of a fiber access network.
HL-2GRV is a GPON ONT that acts as GPON Home Gateway Unit and is designed to provide affordable access to FTTH networks. The products use a single fiber to connect individual houses and businesses to the network for broadband services up to gigabit speeds.
All products within the GPON family comply with current ITU-T standards for gigabit passive optical networks (GPONs). The solution is designed to optimize the deployment and roll-out of the service provider. HL-2GRV design offer multi-interoperability with several OLT vendors. The ONT/ONU products are tested and have proven interoperability with most major GPON OLT Vendors.
HALNy HL-2GRV provides one GPON port (SC/APC type), two Gigabit Ethernet ports, single VoIP/FXS port and RF/CATV port for RF overlay. All units have Layer 3 (HGU / Router / NAT) and Layer 2 support.
HALNy specializes in cost-effective designs, and works closely with service providers to improve their business case through a comprehensive range of standard products, supporting the industry’s common demands. HALNy also provides custom designs and services to meet unique customer needs.
The network interface is compliant to ITU-T G.984.5 to provide 2.5 Gb/s downstream and 1.25 Gb/s upstream. LAN interface allow to provide Gigabit service.
HARDWARE SPECIFICATION
WAN Port: | GPON SC/APC B+ 2.488Gbps Downstream 1.244Gbps Upstream | Phone: | 1 FXS RJ11 |
GPON RX Input: | -10 ~ -27 dBm | Power Supply: | DC +12V 1A (feed via external AC/DC adapter) |
GPON TX Output: | 0.5 ~ 5 dBm | Maximum Power Consumption: | 8W |
LAN Ports: | 2x10/100/1000 Base-T Auto-sensing, auto-detection MDI/ MDI-X | Operating Temp: | 0 ~ 45 C |
RF: | 1xRF CATV (F*connector) | Storage Temp: | -20 ~ 70 C |
RF wavelength: | 1550nm (~ +10nm) | Flash: | Hold two software sets, for active and backup ONT firmware |
RF output: | 45Mhz~1002Mhz | LED: | POWER, PON, LOS, Internet, LAN1-2, TEL |
CATV 1550nm RX Input: | 2 ~ -15 dBm | Buttons: | ON/OFF, Reset |
Device Dimension: | 162.1*121*39.8mm (W*D*H) |
GENERAL PRODUCT FEATURE
GPON: | ITU-T G.984.x and G.988 | L3: | ONT can works as Residential Gateway (Home Gateway Unit: HGU) and SFU (Bridge) |
OMCI G.984.4 | LAN port can be used as WAN | ||
AES decryption | NAT and PAT | ||
Support for FEC (Forrward Error Correction) in both direction | DHCP Server/Client/Relay | ||
Dying Gasp / Power Off notification | IGMP Proxy | ||
Dynamic Bandwidth Allocation | VPN Pass-through | ||
Support for Multicast GEM | UPnP | ||
L2: | 802.1D Bridge | Port Forrwarding | |
VLAN 802.1Q with 802.1p CoS | PPPoE Client | ||
IGMP Snooping v/1v2/v3 | IPv4/IPv6 | ||
Jumbo Frame 2K on GPON WAN | Provisioning: | OMCI | |
Managment: | WEB | DOCSIS like provisioning over GPON/EPON | |
Remote Syslog | TR-069 | ||
OMCI | SNMP | ||
VoIP: | SIP RTP | OMCI | |
DTMF | |||
FAX | |||
G.711-A/U, G.723, G.726 | |||
Dial Plan |
INTEROPERABILITY TEST REPORTS
ADTRAN | DZS | NOKIA (ALCATEL-LUCENT) | ZTE |
CISCO/ALTICE LAN | FIBERHOME | RAISECOM | ZYXEL |
CALIX | HUAWEI | ZHONE | |
We do our best to ensure interoperability works not matter of OLT software or hardware version. For details verification please check our knowledge base or contact with us on support@halny.com |
Leaflet
Download leaflet from below link:
Quick Installation guide
Download QIG from below links:
Declaration of confirmity
Please contact with Sales Team
More Help
If you have any technical question please contact:
Email: support@halny.com