HALNy HL-4G SFU Configuration [UPLINK]

Service scenario

---

Document Date and version	2021.03.19
Tested on OLT UPLINK GP8862	V2.0.7R
Tested with ONT HALNy HL-4G	Supported on Version: V2.0.19 or above
Revision	1

Found something we can improve? Let us know at support@halny.com

ONT configuration

ONT was connect to the GPON port 2 with ONU_ID 14

1. Create DBA Profile

UPLGP8862(config)# profile dba
profile_id:2 create success
UPLGP8862(profile-dba:2)# type 4 maximum 1024000
UPLGP8862(profile-dba:2)# commit

2. Create onu profile

UPLGP8862(config)# profile onu name HL-4G
UPLGP8862(profile-onu:3)# tcont-num 2 gemport-num 2
UPLGP8862(profile-onu:3)# port-num eth 4 iphost 1 veip 1
UPLGP8862(profile-onu:3)# commit

3. Create srv profile

UPLGP8862(config)# profile srv name HL-4G_SFU
UPLGP8862(profile-srv:3)# portvlan eth 1 mode tag vlan 400
UPLGP8862(profile-srv:3)# portvlan eth 2 mode tag vlan 400
UPLGP8862(profile-srv:3)# portvlan eth 3 mode tag vlan 400
UPLGP8862(profile-srv:3)# portvlan eth 4 mode tag vlan 400
UPLGP8862(profile-srv:3)# iphost 1 dhcp
UPLGP8862(profile-srv:3)# commit

4. Create line profile

UPLGP8862(config)# profile line name HL-4G_SFU
UPLGP8862(profile-line:1)# tcont 1 dba dba_profile_2
UPLGP8862(profile-line:1)# gemport 1 tcont 1
UPLGP8862(profile-line:1)# service 1 gemport 1 vlan 100
UPLGP8862(profile-line:1)# service-port 1 gemport 1 uservlan 100 vlan 100
UPLGP8862(profile-line:1)# tcont 2 dba dba_profile_2
UPLGP8862(profile-line:1)# gemport 2 tcont 2
UPLGP8862(profile-line:1)# service 2 gemport 2 vlan 400 iphost 1
UPLGP8862(profile-line:1)# service-port 2 gemport 2 uservlan 400 vlan 400
UPLGP8862(profile-line:1)# commit

5. Register ONT

UPLGP8862(config-pon-0/2)# onu add 7 profile HL-4G sn HALN306FB208

6. Set ONT configuration

UPLGP8862(config-pon-0/2)# onu 7 profile srv name HL-4G_SFU
UPLGP8862(config-pon-0/2)# onu 7 profile line name HL-4G_SFU

7. Check ONT state

UPLGP8862(config-pon-0/2)# show onu state 7
OnuIndex    Admin State    OMCC State    Phase State    Channel
---------------------------------------------------------------
1/1/2:6     enable         enable        working        1(GPON)

---