HALNy HL-2GRV SFU Configuration [Adtran]
HALNy HL-2GRV Configuration
Service scenario
HL-2GRV can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
ONT modes switching HGU<->SFU
To switch mode You need only assign a correct profile to ONT. The device automatically sets the correct mode and restarts.
interface virtual-gigabit-ethernet 14/0/1@1/6/1.gpon
mac limit 8
shutdown
NOTE:
You have to use a “shutdown” for SFU mode and “no shutdown” for HGU mode.
Switching between HGU and SFU modes is described here.
| Document Date and version | 2022.04.08 |
| Tested on OLT Adtran RR101-04-18-TA5006 | Version: 11-1-3-3 |
| Tested on ONT HALNy HL-2GRV | Supported on Version: V3.1.24 or above |
| Revision | 1 |
| Let us know how to improve below document on: support@halny.com |
Supported SFU service scenarios
1. ONT configuration (Access mode, only INTERNET)
ONT was connect to the shelf 1, card 6, GPON port 2 with ONU_ID 14.
1.Create Internet EVC:
evc “EVC-Internet”
s-tag 10 connect men-port erps 1/B/1
mac-switched
no preserve-ce-vlan
no shutdown
2.Register ONT:
remote-device ont 14@1/6/1.gpon
description “HL-2GRV”
mac-spoofing-allowed enable
serial-number “HALN586FFAF0”
no shutdown
3.Enable interfaces:
interface gigabit-ethernet 14/0/1@1/6/1.gpon
mac limit 8
no shutdown
interface gigabit-ethernet 14/0/2@1/6/1.gpon
mac limit 8
no shutdown
To disable or enable the interface, enter shutdown or no shutdown in the interface configuration.
4.Configure ONT interface LAN 1:
evc-map “halny14_eth1” 1/6
connect evc “EVC-Internet”
connect uni gigabit-ethernet 14/0/1@1/6/1.gpon
connect gpon upstream channel 1
match ce-vlan-id 10
men-pri 0
men-c-tag-pri 0
no shutdown
5.Configure ONT interface LAN 2:
evc-map “halny14_eth2” 1/6 connect evc “EVC-Internet”
connect uni gigabit-ethernet 14/0/2@1/6/1.gpon
connect gpon upstream channel 1
match ce-vlan-id 10
men-pri 0
men-c-tag-pri 0
no shutdown
6..Enable SFU mode:
interface virtual-gigabit-ethernet 14/0/1@1/6/1.gpon
mac limit 8
shutdown
2. ONT configuration (Access mode, INTERNET, IP-HOST, VoIP, RF)
ONT was connect to the shelf 1, card 6, GPON port 2 with ONU_ID 14.
1.Create Internet EVC:
evc “EVC-Internet”
s-tag 10 connect men-port erps 1/B/1
mac-switched
no preserve-ce-vlan
no shutdown
2.Create VoIP EVC:
evc “EVC-VOIP”
s-tag 20
connect men-port erps 1/B/1
mac-switched
no preserve-ce-vlan
no shutdown
3.Register ONT:
remote-device ont 14@1/6/1.gpon
description “HL-2GRV”
mac-spoofing-allowed enable
serial-number “HALN586FFAF0”
voip-config method omci
no shutdown
4.Enable interfaces:
interface fxs 14/0/1@1/6/1.gpon
no shutdown
interface rf-video 14/0/1@1/6/1.gpon
no shutdown
interface gigabit-ethernet 14/0/1@1/6/1.gpon
mac limit 8
no shutdown
interface gigabit-ethernet 14/0/2@1/6/1.gpon
mac limit 8
no shutdown
To disable or enable the interface, enter shutdown or no shutdown in the interface configuration.
5.Configure LAN 1 interface:
evc-map “halny14_eth1” 1/6
connect evc “EVC-Internet”
connect uni gigabit-ethernet 14/0/1@1/6/1.gpon
connect gpon upstream channel 1
match ce-vlan-id 10
men-pri 0
men-c-tag-pri 0
no shutdown
6.Configure LAN 2 interface:
evc-map “halny14_eth1” 1/6
connect evc “EVC-Internet”
connect uni gigabit-ethernet 14/0/2@1/6/1.gpon
connect gpon upstream channel 1
match ce-vlan-id 10
men-pri 0
men-c-tag-pri 0
no shutdown
7.Configure VoIP protocol:
voice protocol 14@1/6/1.gpon sip
8.Create IP-HOST for VoIP:
interface ip-host “IP-HOST_14” 14@1/6/1.gpon
ip address dhcp
connect service sip
no shutdown
evc-map “halny14_sip” 1/6
connect evc “EVC-VOIP”
connect ip-host “IP-HOST_14” 14@1/6/1.gpon
match ce-vlan-id 20
men-pri 5
men-c-tag-pri 0
no shutdown
9.Configure SIP-CODEC:
voice profile codec-list “SIP_Codec”
preference 1 codec g729
preference 2 codec g711alaw
preference 3 codec g711ulaw
10.Configure call feature:
voice profile call-feature “SIP_CALL”
feature-mode local
11.Configure dial plan:
voice profile dialing “SIP_DIAL_PLAN”
description “”
dial-plan 900-number 1-900-NXX-XXXX
dial-plan 900-number 1-976-NXX-XXXX
dial-plan international 011-$
dial-plan local NXX-XXXX
dial-plan national 1-NXX-NXX-XXXX
dial-plan operator-assisted 0
dial-plan toll-free 1-800-NXX-XXXX
dial-plan toll-free 1-866-NXX-XXXX
dial-plan toll-free 1-877-NXX-XXXX
dial-plan toll-free 1-888-NXX-XXXX
12.Configure SIP Media:
voice profile media “SIP_MEDIA”
13.Create VoIP account:
voice user sip 14/0/1@1/6/1
description “123456789”
connect fxs 14/0/1@1/6/1
connect profile codec-list “SIP_CODEC”
connect profile call-feature “SIP_CALL”
connect profile dialing “SIP_DIAL_PLAN”
connect profile media “SIP_MEDIA”
identity “123456789”
sip-trunk “T01”
auth-name “123456789”
password “Password”
no shutdown
14.Enable SFU mode:
interface virtual-gigabit-ethernet 14/0/1@1/6/1.gpon
mac limit 8
shutdown
3. ONT configuration (Access mode, INTERNET, IPTV, IP-HOST, VoIP, RF)
ONT was connect to the shelf 1, card 6, GPON port 2 with ONU_ID 14.
1.Create Internet EVC:
evc “EVC-Internet”
s-tag 10
connect men-port erps 1/B/1
mac-switched
no preserve-ce-vlan
no shutdown
2.Create VoIP EVC:
evc “EVC-VOIP”
s-tag 20
connect men-port erps 1/B/1
mac-switched
no preserve-ce-vlan
no shutdown
3.Create IPTV EVC:
evc “EVC-Video”
s-tag 40
connect men-port erps 1/B/1
mac-switched
no preserve-ce-vlan
no shutdown
4.Register ONT:
remote-device ont 14@1/6/1.gpon
description “HL-2GRV”
mac-spoofing-allowed enable
serial-number “HALN586FFAF0”
voip-config method omci
no shutdown
5.Enable interfaces:
interface fxs 14/0/1@1/6/1.gpon
no shutdown
interface rf-video 14/0/1@1/6/1.gpon
no shutdown
interface gigabit-ethernet 14/0/1@1/6/1.gpon
mac limit 8
no shutdown
interface gigabit-ethernet 14/0/2@1/6/1.gpon
mac limit 8
no shutdown
To disable or enable the interface, enter shutdown or no shutdown in the interface configuration.
6.Configure LAN 1 interface:
evc-map “halny14_eth1” 1/6
connect evc “EVC-Internet”
connect uni gigabit-ethernet 14/0/1@1/6/1.gpon
connect gpon upstream channel 1
match ce-vlan-id 10
men-pri 0
men-c-tag-pri 0
no shutdown
7.Configure LAN 2 interface:
evc-map “halny14_eth2” 1/6
connect evc “EVC-Video”
connect uni gigabit-ethernet 14/0/2@1/6/1.gpon
connect gpon upstream channel 1
match ce-vlan-id 40
men-pri 3
men-c-tag-pri 0
match source mac-address 00:02:02:00:00:00 ff:ff:ff:00:00:00
subscriber igmp mode processing-enabled
subscriber igmp immediate-leave
subscriber igmp proxy router ip address 10.20.200.2
subscriber access dhcp mode authenticate
subscriber access pppoe mode block
subscriber arp mode proxy
subscriber access dhcp option-82
subscriber access dhcp option-82 remote-id
description VIDEO_description
no shutdown
8.Configure VoIP protocol:
voice protocol 14@1/6/1.gpon sip
9.Create IP-HOST for VoIP:
interface ip-host “IP-HOST_14” 14@1/6/1.gpon
ip address dhcp
connect service sip
no shutdown
evc-map “halny14_sip” 1/6
connect evc “EVC-VOIP”
connect ip-host “IP-HOST_14” 14@1/6/1.gpon
match ce-vlan-id 20
men-pri 5
men-c-tag-pri 0
no shutdown
10.Configure SIP-CODEC:
voice profile codec-list “SIP_Codec”
preference 1 codec g729
preference 2 codec g711alaw
preference 3 codec g711ulaw
11.Configure call feature:
voice profile call-feature “SIP_CALL”
feature-mode local
12.Configure dial plan:
voice profile dialing “SIP_DIAL_PLAN”
description “”
dial-plan 900-number 1-900-NXX-XXXX
dial-plan 900-number 1-976-NXX-XXXX
dial-plan international 011-$
dial-plan local NXX-XXXX
dial-plan national 1-NXX-NXX-XXXX
dial-plan operator-assisted 0
dial-plan toll-free 1-800-NXX-XXXX
dial-plan toll-free 1-866-NXX-XXXX
dial-plan toll-free 1-877-NXX-XXXX
dial-plan toll-free 1-888-NXX-XXXX
13.Configure SIP Media:
voice profile media “SIP_MEDIA”
14.Create VoIP account:
voice user sip 14/0/1@1/6/1
description “123456789”
connect fxs 14/0/1@1/6/1
connect profile codec-list “SIP_CODEC”
connect profile call-feature “SIP_CALL”
connect profile dialing “SIP_DIAL_PLAN”
connect profile media “SIP_MEDIA”
identity “123456789”
sip-trunk “T01”
auth-name “123456789”
password “Password”
no shutdown
15.Enable SFU mode:
interface virtual-gigabit-ethernet 14/0/1@1/6/1.gpon
mac limit 8
shutdown
