HALNy HL-2GRV HGU Configuration [DASAN]

Created On22 czerwca 2020

Last Updated On5 lutego 2024

byDaniel M

HALNy HL-2BV Configuration

Service scenario

HL-2GRV can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
SFU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In example, if ONT has to be working as HGU, we need to set only VEIP. If as SFU, we need to set bridge port(s) and VEIP(only if we want to use ip-host).
SFU mode allows to prepare more complex configuration – such as QinQ tunnel or VLAN translation on the ONT. In this tutorial we will focus on HGU mode configuration.

Document Date and version	2020.12.22
Tested on OLT DASAN V5808	Version: 1.04-0050
Tested with ONT HALNy HL-2GRV	Supported on Version: V3.0.11 or above
Revision	1

Let us know how to improve below document on: support@halny.com

ONT configuration

1. Triple Play (Internet, IPTV, VoIP)

ONT was connect to the GPON port 2 with ONU_ID 14

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create multicast-profile

V5808(gpon)#multicast-profile MULTI create
  igmp robustness-variable 7
  igmp access-list vid 200 dst-ip start 224.0.0.1 end 239.255.255.255 bw 4294952 gem 4094
  apply

3. MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. ONU traffic-profile configuration

V5808(gpon)#traffic-profile HL-2GRV create
  tcont 1
  gemport 1/1
  dba-profile DBA
  tcont 2
  gemport 2/1
  dba-profile DBA
  mapper 1
  gemport count 1
  mapper 2
  gemport count 1
  bridge 1
  ani mapper 1
  uni virtual-eth 1
  multicast-profile MULTI
  bridge 2
  ani mapper 2
  link ip-host-config 1
  ip-host-config 1
  ip address dhcp
  extended-vlan-tagging-operation MGMT
  apply

5. ONU onu-profile configuration

V5808(gpon)#onu-profile HL-2GRV create
  traffic-profile HL-2GRV
  apply

6. Assig onu-profile to ONT

V5808(config-gpon-olt-[2])#onu-profile 14 HL-2GRV

7. Verify ONT ip-host 1 IP address

V5808(config-gpon-olt-[2])#show onu ip-host 14
---------------------------------------------------------------
OLT : 2, ONU : 14, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : 54:db:a2:f9:fb:60
 Current IP            : 172.17.60.95
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.17.60.1
 Current Secondary DNS : 0.0.0.0
 Domain name           :
 Host name             :

2. Triple Play with VLAN translation (Internet, IPTV, VoIP)

VLAN translation:
VLAN 100 -> VLAN 101
VLAN 200 -> VLAN 202
VLAN 300 -> VLAN 303

ONT was connect to the GPON port 2 with ONU_ID 15

1. Create DBA Profile

V5808(gpon)#dba-profile DBA create
  mode sr
  sla fixed 1024
  sla maximum 1031616
  apply

2. Create multicast-profile

V5808(gpon)#multicast-profile MULTI create
  igmp robustness-variable 7
  igmp access-list vid 200 dst-ip start 224.0.0.1 end 239.255.255.255 bw 4294952 gem 4094
  apply

3. Create MGMT VLAN configuration

V5808(gpon)#extended-vlan-tagging-operation MGMT create
  downstream-mode enable
  untagged-frame 1
  treat inner vid 400 cos 0 tpid 0x8100
  apply

4. Create translation configuration

V5808(gpon)# extended-vlan-tagging-operation TRANSLATION create
  downstream-mode enable
  single-tagged-frame 1
   filter inner vid 101 cos any tpid any
   treat remove single
   treat inner vid 100 cos copy-inner tpid copy-inner
  single-tagged-frame 2
   filter inner vid 202 cos any tpid any
   treat remove single
   treat inner vid 200 cos copy-inner tpid copy-inner
  single-tagged-frame 3
   filter inner vid 303 cos any tpid any
   treat remove single
   treat inner vid 300 cos copy-inner tpid copy-inner
  apply

5. Create ONU traffic-profile

V5808(gpon)#traffic-profile HL-2GRV_TRANSLATION create
  tcont 1
  gemport 1/1
  dba-profile DBA
  tcont 2
  gemport 2/1
  dba-profile DBA
  mapper 1
  gemport count 1
  mapper 2
  gemport count 1
  bridge 1
  ani mapper 1
  uni virtual-eth 1
  multicast-profile MULTI
  extended-vlan-tagging-operation TRANSLATION
  bridge 2
  ani mapper 2
  link ip-host-config 1
  ip-host-config 1
  ip address dhcp
  extended-vlan-tagging-operation MGMT
  apply

6. Create onu-profile

V5808(gpon)#onu-profile HL-2GRV_TRANSLATION create
  traffic-profile HL-2GRV_TRANSLATION
  apply

7. Assign onu-profile to ONT

V5808(config-gpon-olt-[2])#onu-profile 15 HL-2GRV_TRANSLATION

8. Verify ONT ip-host 1 IP address

V5808(config-gpon-olt-[2])#show onu ip-host 15
---------------------------------------------------------------
OLT : 2, ONU : 15, Host : 1(0x0000)
---------------------------------------------------------------
 IP Option             : DHCP
 MAC Address           : 54:db:a2:f9:fb:60
 Current IP            : 172.17.60.95
 Current Mask          : 255.255.254.0
 Current Gateway       : 172.17.60.1
 Current Primary DNS   : 172.17.60.1
 Current Secondary DNS : 0.0.0.0
 Domain name           :
 Host name             :

ONT HL-2GRV Provisioning on DASAN V5808

There are three ways of ONT provisioning:

DHCP option 66,67 (link)
TR-069(link)
DASAN PROVISIONING mgmt-mode

DASAN PROVISIONING mgmt-mode

Configuration of ONT Provisioning in onu-profile.

V5808(gpon)#onu-profile HL-2GRV create
 traffic-profile HL-2GRV
 mgmt-mode mode ip-path
 mgmt-mode ip-path ftp id USERNAME password PASSWORD
 mgmt-mode ip-path uri IP.IP.IP.IP file FILE_NAME or none
 apply

Configuration of ONT Provisioning on GPON port.

V5808(config-gpon-olt-[2])#onu mgmt-mode ip-path ONU_ID ftp id USERNAME password PASSWORD
V5808(config-gpon-olt-[2])#onu mgmt-mode ip-path ONU_ID uri IP.IP.IP.IP file FILE_NAME or none

* On Dasan OLTs if you configure provisioning with file none ””, it means that ONT will find xml file on FTP server with file name of its GPON S/N numer.

Verifying if xml is downloaded successfully.

V5808(config-gpon-olt-[2])#show onu mgmt ip-path 14
---------------------------------------------------------------
OLT : 2, ONU : 14
---------------------------------------------------------------
PROTOCOL :
URI :
ID :
PASSWORD :
FILE NAME :
STATE : File transfer completed successfully

After ONT downloaded XML file and set configuration , it keeps configuration in memory until new XML file will be applied.

When ONT starts to download XML file:
1) MGMT IP-PATH configuration will be changed (filename /FTP credits /FTP url)
2) Interface on ip-host will get DHCP ACK
3) Configuration of static ip-host interface will be changed

When configured ONT downloads XML file first of all it checks
• XML file name if filename differs , new configuration is applied and ONT reboots
• Modificated date if filename is the same then ONT checks if modificated date differs . If differs then new configuration is applied and ONT reboots
• No differs if filename and modificated date are the same ONT keeps current configuration

ONT HL-2GRV HGU upgrade on DASAN OLTs

HL-2GRV can be upgrade the same way as other HALNy ONTs, You can find upgrade procedure here.

How Can We Help?