HL-1GE / HL-1GE2 SFU Configuration [ZYXEL XGS-PON]

Service scenario

HL-1GE / HL-1GE2 can work in two modes – HGU (Home Gateway Unit) and SFU (Single Family Unit).
HGU mode configuration is presented here.
Managing ONT mode is done by setting up/or not bridge port and VEIP for ONT. In SFU mode we need to set bridge port and VEIP(only if we want to use ip-host).
In this tutorial we will focus on SFU mode configuration.

ONT modes switching HGU<->SFU

Switching between HGU and SFU modes is described here.

Document Date and version	2025.07.03
Tested on ZYXEL IES4204	Version: V2.03(ABGX.6)
Tested with ONT HALNy HL-1GE / HL-1GE2	Supported on Version: V2.0.29 or above
Revision	1

Found something we can improve? Let us know at support@halny.com

Supported service scenarios

1. ONT Configuration (Access mode, only INTERNET)

ONT was connect to the GPON port 2/1 with ONU_ID 8

1. Create DBA-profile

MSC1240QA(config)# xpon qos bwprof 1G
  sir 0 air 0 pir 1024000

2. Create xpon uni-profile.

MSC1240QA(config)# xpon uni-profile HL-1GE_SFU
  port lan 1~8 inactive
  port xlan 1~8 inactive
  port veip 1 inactive
  port lan tag-oper-id 1
    uniport-list 1
    filter uni-vlan 100
    vlan 100
  exit
exit

3. Create service-profile.

MSC1240QA(config)# xpon service-profile LAN_V100
  mode bridge
  port lan 1
  vlan 100
exit

4. Create template.

MSC1240QA(config)# xpon template HL-1GE_SFU
  service 1 service-profile LAN_V100 shared-priority 7 usbwprof 1G dsbwprof 1G
  tcont 1 services 1 usbwprof 1G dsbwprof 1G type best-effort
  uni-profile HL-1GE_SFUU

5. Authorize ONT – set correct serial number and password (register method A)

MSC1240QA(config)# interface remote xont 2-1-8
MSC1240QA(config-interface-xont-2-1-8)# inactive
   sn HALN08700180
   registration-id 00000001
   ip-host vlan 500/0 dynamic
   template HL-1GE_SFU
   no inactive

6. Verify ONT ip-host 1 address

MSC1240QA# show interface remote xont 2-1-8 ip-host status
  ----------------------+--------------------
    AID                 : ont-2-1-8
  ----------------------+--------------------
    vlan Id-config      : 500/0
    IP type-config      : dynamic
    IP address          : 172.17.60.130
    IP mask             : 255.255.254.0
    IP gateway          : 172.17.60.1
    IP Primary DNS      : 172.17.61.224
    IP Secondary DNS    : 172.17.60.1
  ----------------------+--------------------

ONT HL-1GE / HL-1GE2 HGU Provisioning on ZYXEL IES4204

There is a way to ONT provisioning:

• DHCP option 66,67 (link)

ONT HL-1GE / HL-1GE2 HGU Upgrade on ZYXEL IES4204

HL-1GE / HL-1GE2 HGU can be upgraded the same way as other HALNy ONTs, You can find upgrade procedure here.

---